暂无描述

PacketDotNet.xml 459KB

    <?xml version="1.0"?> <doc> <assembly> <name>/home/cmorgan/hdd/packetnet_git/PacketDotNet/bin/Release/PacketDotNet</name> </assembly> <members> <member name="T:PacketDotNet.ApplicationPacket"> <summary> Represents an application layer packet as described at http://en.wikipedia.org/wiki/Application_Layer </summary> </member> <member name="M:PacketDotNet.ApplicationPacket.#ctor"> <summary> ApplicationPacket constructor </summary> </member> <member name="T:PacketDotNet.Ieee80211.ActionFrame"> <summary> Format of an 802.11 management action frame. These frames are used by the 802.11e (QoS) and 802.11n standards to request actions of stations. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ActionFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ActionFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ActionFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier. </param> </member> <member name="P:PacketDotNet.Ieee80211.ActionFrame.FrameSize"> <summary> Gets the size of the frame in bytes </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.ActionFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.ReassociationRequestFrame"> <summary> Reassociation request frame. Sent when a wireless client is going from one access point to another http://en.wikipedia.org/wiki/IEEE_802.11#Frames </summary> </member> <member name="M:PacketDotNet.Ieee80211.ReassociationRequestFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ReassociationRequestFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ReassociationRequestFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> BssId. </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.CapabilityInformationBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.CapabilityInformation"> <summary> Gets or sets the capability information, the type of network the mobile station wants to join </summary> <value> The capability information. </value> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.ListenInterval"> <summary> Gets or sets the listen interval. This is the number of beacon interval time periods that the access point must retain buffered packets for. </summary> <value> The listen interval. </value> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.ListenIntervalBytes"> <summary> Gets or sets the listen interval, the length of buffered frame retention </summary> <value> The listen interval. </value> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.CurrentAccessPointAddress"> <summary> DestinationAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.InformationElements"> <summary> Gets or sets the information elements. </summary> <value> The information elements. </value> </member> <member name="P:PacketDotNet.Ieee80211.ReassociationRequestFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.ReassociationRequestFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField"> <summary> Block acknowledgment control field. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.#ctor(System.UInt16)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField" /> class. </summary> <param name="field"> Field. </param> </member> <member name="T:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.AcknowledgementPolicy"> <summary> The available block acknowledgement policies. </summary> </member> <member name="F:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.AcknowledgementPolicy.Delayed"> <summary> The acknowledgement does not have to be sent immediately after the request </summary> </member> <member name="F:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.AcknowledgementPolicy.Immediate"> <summary> The acknowledgement must be sent immediately after the request </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.Policy"> <summary> The block acknowledgement policy in use </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.MultiTid"> <summary> True if the acknowledgement can ack multi traffic ids </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.CompressedBitmap"> <summary> True if the frame is using a compressed acknowledgement bitmap. Newer standards used a compressed bitmap reducing its size </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.Tid"> <summary> The traffic id being ack'd </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentControlField.Field"> <summary> Gets or sets the field. This provides direct access to the bytes that back all the other properties in the field. </summary> <value> The field. </value> </member> <member name="T:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame"> <summary> Format of the 802.11 block acknowledgment frame. http://en.wikipedia.org/wiki/Block_acknowledgement </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Byte[])"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame" /> class. </summary> <param name="TransmitterAddress"> Transmitter address. </param> <param name="ReceiverAddress"> Receiver address. </param> <param name="BlockAckBitmap"> The Block ack bitmap signalling the receive status of the MSDUs. </param> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.ReceiverAddress"> <summary> Receiver address </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.TransmitterAddress"> <summary> Transmitter address </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.BlockAckRequestControlBytes"> <summary> Gets or sets the block ack request control bytes. </summary> <value> The block ack request control bytes. </value> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.BlockAcknowledgmentControl"> <summary> Block acknowledgment control field </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.BlockAckStartingSequenceControl"> <summary> Gets or sets the block ack starting sequence control. </summary> <value> The block ack starting sequence control. </value> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.BlockAckBitmap"> <summary> Gets or sets the block ack bitmap used to indicate the receive status of the MPDUs. </summary> <value> The block ack bitmap. </value> <exception cref="T:System.ArgumentException"> Is thrown when the bitmap is of an incorrect lenght. The bitmap must be either 8 or 64 btyes longs depending on whether or not it is compressed. </exception> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.AssociationResponseFrame"> <summary> Format of an 802.11 management association response frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AssociationResponseFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.AssociationResponseFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AssociationResponseFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (MAC Address of Access Point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.CapabilityInformationBytes"> <summary> The raw capability information bytes </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.CapabilityInformation"> <summary> The capability information field that describes the networks capabilities. </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.StatusCode"> <summary> Value indicating the success or failure of the association. </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.AssociationId"> <summary> The id assigned to the station by the access point to assist in management and control functions. Although this is a 16bit field only 14 of the bits are used to represent the id. Therefore the available values for this field are inthe range 1-2,007. </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.InformationElements"> <summary> The information elements included in the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationResponseFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.AssociationResponseFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.AssociationRequestFrame"> <summary> Format of an 802.11 management association frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AssociationRequestFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.AssociationRequestFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AssociationRequestFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (MAC Address of Access Point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.AssociationRequestFrame.CapabilityInformationBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.AssociationRequestFrame.CapabilityInformation"> <summary> Gets or sets the capability information. </summary> <value> The capability information. </value> </member> <member name="P:PacketDotNet.Ieee80211.AssociationRequestFrame.ListenInterval"> <summary> Gets or sets the listen interval. </summary> <value> The listen interval. </value> </member> <member name="P:PacketDotNet.Ieee80211.AssociationRequestFrame.InformationElements"> <summary> Gets or sets the information elements. </summary> <value> The information elements. </value> </member> <member name="P:PacketDotNet.Ieee80211.AssociationRequestFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.AssociationRequestFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.AuthenticationFrame"> <summary> Format of an 802.11 management authentication frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AuthenticationFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.AuthenticationFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AuthenticationFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (MAC Address of Access Point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.AuthenticationFrame.AuthenticationAlgorithmNumber"> <summary> Number used for selection of authentication algorithm </summary> </member> <member name="P:PacketDotNet.Ieee80211.AuthenticationFrame.AuthenticationAlgorithmTransactionSequenceNumber"> <summary> Sequence number to define the step of the authentication algorithm </summary> </member> <member name="P:PacketDotNet.Ieee80211.AuthenticationFrame.StatusCode"> <summary> Indicates the success or failure of the authentication operation </summary> </member> <member name="P:PacketDotNet.Ieee80211.AuthenticationFrame.InformationElements"> <summary> The information elements included in the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.AuthenticationFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.AuthenticationFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.AuthenticationStatusCode"> <summary> The potential results of authentication or association operations. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.Success"> <summary> Constant success. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnspecifiedFailure"> <summary> Constant unspecified failure. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.RequestedCapabilityUnsupportable"> <summary> Constant requested capability unsupportable. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnidentifiablePriorAssociation"> <summary> Constant unidentifiable prior association. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.NonStandardUnspecifiedDenial"> <summary> Constant non standard unspecified denial. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.AuthenticationAlgorithmNotSupported"> <summary> Constant authentication algorithm not supported. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnexpectedSequenecNumber"> <summary> Constant unexpected sequenec number. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.ResponseToChallengeFailed"> <summary> Constant response to challenge failed. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.NextFrameOutsideExpectedWindow"> <summary> Constant next frame outside expected window. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.AccessPointResourceConstrained"> <summary> Constant access point resource constrained. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportDataRates"> <summary> Constant station doesnt support data rates. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportPreamble"> <summary> Constant station doesnt support preamble. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportPbccModulation"> <summary> Constant station doesnt support pbcc modulation. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportChannelAgility"> <summary> Constant station doesnt support channel agility. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.SpectrumManagementRequired"> <summary> Constant spectrum management required. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnacceptablePowerCapabilityValue"> <summary> Constant unacceptable power capability value. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnacceptableSupportedChannelsValue"> <summary> Constant unacceptable supported channels value. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportShortTimeSlot"> <summary> Constant station doesnt support short time slot. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.StationDoesntSupportDsssOfdm"> <summary> Constant station doesnt support dsss ofdm. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.InvalidInformationElement"> <summary> Constant invalid information element. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.InvalidGroupCipher"> <summary> Constant invalid group cipher. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.InvalidPairwiseCipher"> <summary> Constant invalid pairwise cipher. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.InvalidAuthenticationAndKeyManagementProtocol"> <summary> Constant invalid authentication and key management protocol. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnsupportedRsnInformationElementVersion"> <summary> Constant unsupported rsn information element version. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.UnsupportedRsnIeCapabilities"> <summary> Constant unsupported rsn ie capabilities. </summary> </member> <member name="F:PacketDotNet.Ieee80211.AuthenticationStatusCode.CipherSuitePolicyRejection"> <summary> Constant cipher suite policy rejection. </summary> </member> <member name="T:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame"> <summary> Block acknowledgment request frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame" /> class. </summary> <param name="TransmitterAddress"> Transmitter address. </param> <param name="ReceiverAddress"> Receiver address. </param> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.ReceiverAddress"> <summary> Receiver address </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.TransmitterAddress"> <summary> Transmitter address </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.BlockAckRequestControlBytes"> <summary> Block acknowledgment control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.BlockAcknowledgmentControl"> <summary> Block acknowledgment control field </summary> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.BlockAckStartingSequenceControl"> <summary> Gets or sets the sequence number of the first MSDU for which this block acknowledgement request frame is sent </summary> <value> The block ack starting sequence control field value </value> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.BlockAckStartingSequenceControlBytes"> <summary> Gets or sets the block ack starting sequence control. </summary> <value> The block ack starting sequence control. </value> </member> <member name="P:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BlockAcknowledgmentRequestFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.DeauthenticationFrame"> <summary> Deauthentication frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DeauthenticationFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DeauthenticationFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DeauthenticationFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (MAC Address of the Access Point). </param> </member> <member name="P:PacketDotNet.Ieee80211.DeauthenticationFrame.Reason"> <summary> Gets the reason for deauthentication. </summary> <value> The reason. </value> </member> <member name="P:PacketDotNet.Ieee80211.DeauthenticationFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.DeauthenticationFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.DataLinkPacket"> <summary> Represents a Layer 2 protocol. </summary> </member> <member name="M:PacketDotNet.DataLinkPacket.#ctor"> <summary> DataLinkPacket constructor </summary> </member> <member name="T:PacketDotNet.EthernetPacket"> <summary> See http://en.wikipedia.org/wiki/Ethernet#Ethernet_frame_types_and_the_EtherType_field </summary> </member> <member name="M:PacketDotNet.EthernetPacket.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.EthernetPacketType)"> <summary> Construct a new ethernet packet from source and destination mac addresses </summary> </member> <member name="M:PacketDotNet.EthernetPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.EthernetPacket.PayloadPacket"> <value> Payload packet, overridden to set the 'Type' field based on the type of packet being used here if the PayloadPacket is being set </value> </member> <member name="P:PacketDotNet.EthernetPacket.SourceHwAddress"> <summary> MAC address of the host where the packet originated from.</summary> </member> <member name="P:PacketDotNet.EthernetPacket.DestinationHwAddress"> <summary> MAC address of the host where the packet originated from.</summary> </member> <member name="P:PacketDotNet.EthernetPacket.Type"> <value> Type of packet that this ethernet packet encapsulates </value> </member> <member name="P:PacketDotNet.EthernetPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.EthernetPacket.ParseEncapsulatedBytes(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.EthernetPacketType)"> <summary> Used by the EthernetPacket constructor. Located here because the LinuxSLL constructor also needs to perform the same operations as it contains an ethernet type </summary> <param name="Header"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="Type"> A <see cref="T:PacketDotNet.EthernetPacketType" /></param> <returns> A <see cref="T:PacketDotNet.PacketOrByteArraySegment" /></returns> </member> <member name="M:PacketDotNet.EthernetPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the EthernetPacket inside of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.EthernetPacket" /></returns> </member> <member name="M:PacketDotNet.EthernetPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.EthernetPacket.RandomPacket"> <summary> Generate a random EthernetPacket TODO: could improve this routine to set a random payload as well </summary> <returns> A <see cref="T:PacketDotNet.EthernetPacket" /></returns> </member> <member name="T:PacketDotNet.EthernetPacketType"> Copied from Pcap.Net @ 20091117 <summary> Code constants for well-defined ethernet protocols. EtherType is a two-octet field in an Ethernet frame, as defined by the Ethernet II framing networking standard. It is used to indicate which protocol is encapsulated in the payload. Also contains entries taken from linux/if_ether.h and tcpdump/ethertype.h </summary></member> <member name="F:PacketDotNet.EthernetPacketType.None"> <summary> No Ethernet type </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.IpV4"> <summary> Internet Protocol, Version 4 (IPv4) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.Arp"> <summary> Address Resolution Protocol (ARP) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.ReverseArp"> <summary> Reverse Address Resolution Protocol (RARP) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.WakeOnLan"> <summary> Wake-On-Lan (WOL) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.AppleTalk"> <summary> AppleTalk (Ethertalk) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.AppleTalkArp"> <summary> AppleTalk Address Resolution Protocol (AARP) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.VLanTaggedFrame"> <summary> VLAN-tagged frame (IEEE 802.1Q) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.NovellInternetworkPacketExchange"> <summary> Novell IPX (alt) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.Novell"> <summary> Novell </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.IpV6"> <summary> Internet Protocol, Version 6 (IPv6) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.MacControl"> <summary> MAC Control </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.CobraNet"> <summary> CobraNet </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.MultiprotocolLabelSwitchingUnicast"> <summary> MPLS unicast </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.MultiprotocolLabelSwitchingMulticast"> <summary> MPLS multicast </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.PointToPointProtocolOverEthernetDiscoveryStage"> <summary> PPPoE Discovery Stage </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.PointToPointProtocolOverEthernetSessionStage"> <summary> PPPoE Session Stage </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.ExtensibleAuthenticationProtocolOverLan"> <summary> EAP over LAN (IEEE 802.1X) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.HyperScsi"> <summary> HyperSCSI (SCSI over Ethernet) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.AtaOverEthernet"> <summary> ATA over Ethernet </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.EtherCatProtocol"> <summary> EtherCAT Protocol </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.ProviderBridging"> <summary> Provider Bridging (IEEE 802.1ad) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.AvbTransportProtocol"> <summary> AVB Transport Protocol (AVBTP) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.LLDP"> <summary> Link Layer Discovery Protocol (LLDP) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.SerialRealTimeCommunicationSystemIii"> <summary> SERCOS III </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.CircuitEmulationServicesOverEthernet"> <summary> Circuit Emulation Services over Ethernet (MEF-8) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.HomePlug"> <summary> HomePlug </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.MacSecurity"> <summary> MAC security (IEEE 802.1AE) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.PrecisionTimeProtocol"> <summary> Precision Time Protocol (IEEE 1588) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.ConnectivityFaultManagementOrOperationsAdministrationManagement"> <summary> IEEE 802.1ag Connectivity Fault Management (CFM) Protocol / ITU-T Recommendation Y.1731 (OAM) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.FibreChannelOverEthernet"> <summary> Fibre Channel over Ethernet </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.FibreChannelOverEthernetInitializationProtocol"> <summary> FCoE Initialization Protocol </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.QInQ"> <summary> Q-in-Q </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.VeritasLowLatencyTransport"> <summary> Veritas Low Latency Transport (LLT) </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.Loop"> <summary> Ethernet loopback packet </summary> </member> <member name="F:PacketDotNet.EthernetPacketType.Echo"> <summary> Ethernet echo packet </summary> </member> <member name="T:PacketDotNet.Ieee80211.BeaconFrame"> <summary> Format of an 802.11 management beacon frame. Beacon frames are used to annouce the existance of a wireless network. If an access point has been configured to not broadcast its SSID then it may not transmit beacon frames. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BeaconFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.BeaconFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.BeaconFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="BssId"> Bss identifier (MAC Address of the Access Point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.Timestamp"> <summary> The number of microseconds the networks master timekeeper has been active. Used for synchronisation between stations in an IBSS. When it reaches the maximum value the timestamp will wrap (not very likely). </summary> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.BeaconInterval"> <summary> The number of "time units" between beacon frames. A time unit is 1,024 microseconds. This interval is usually set to 100 which equates to approximately 100 milliseconds or 0.1 seconds. </summary> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.CapabilityInformationBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.CapabilityInformation"> <summary> Defines the capabilities of the network. </summary> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="P:PacketDotNet.Ieee80211.BeaconFrame.InformationElements"> <summary> The information elements included in the frame Most (but not all) beacons frames will contain an Information element that contains the SSID. </summary> </member> <member name="M:PacketDotNet.Ieee80211.BeaconFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.CapabilityInformationField"> <summary> Capability information field. </summary> </member> <member name="M:PacketDotNet.Ieee80211.CapabilityInformationField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.CapabilityInformationField.#ctor(System.UInt16)"> <summary> Constructor </summary> <param name="field"> A <see cref="T:System.UInt16" /></param> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.IsEss"> <summary> Is set to 1 when the beacon frame is representing an ESS (as opposed to an IBSS) This field and IsIbss should be mutually exclusive </summary> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.IsIbss"> <summary> Is set to 1 when the beacon frame is representing an IBSS (as opposed to an ESS) This field and IsEss should be mutually exclusive </summary> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.CfPollable"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> cf pollable. </summary> <value> <c>true</c> if cf pollable; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.CfPollRequest"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> cf poll request. </summary> <value> <c>true</c> if cf poll request; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.Privacy"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> is privacy. </summary> <value> <c>true</c> if privacy; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.ShortPreamble"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> short preamble. </summary> <value> <c>true</c> if short preamble; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.Pbcc"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> is pbcc. </summary> <value> <c>true</c> if pbcc; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.ChannelAgility"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> channel agility. </summary> <value> <c>true</c> if channel agility; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.ShortTimeSlot"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> short time slot. </summary> <value> <c>true</c> if short time slot; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.DssOfdm"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.CapabilityInformationField" /> dss ofdm. </summary> <value> <c>true</c> if dss ofdm; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.CapabilityInformationField.Field"> <summary> Gets or sets the field. </summary> <value> The field. </value> </member> <member name="M:PacketDotNet.Ieee80211.CapabilityInformationField.GetBitFieldValue(System.UInt16)"> <summary> Returns true if the bit is set false if not. </summary> <param name="index">0 indexed position of the bit</param> </member> <member name="T:PacketDotNet.Ieee80211.ContentionFreeEndFrame"> <summary> Contention free end frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ContentionFreeEndFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ContentionFreeEndFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ContentionFreeEndFrame" /> class. </summary> <param name="ReceiverAddress"> Receiver address. </param> <param name="BssId"> Bss identifier (MAC Address of the Access Point). </param> </member> <member name="P:PacketDotNet.Ieee80211.ContentionFreeEndFrame.ReceiverAddress"> <summary> Receiver address </summary> </member> <member name="P:PacketDotNet.Ieee80211.ContentionFreeEndFrame.BssId"> <summary> BSS ID </summary> </member> <member name="P:PacketDotNet.Ieee80211.ContentionFreeEndFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.ContentionFreeEndFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ContentionFreeEndFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.DataDataFrame"> <summary> Data data frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DataDataFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DataDataFrame" /> class. </summary> <param name="bas"> Bas. </param> </member> <member name="M:PacketDotNet.Ieee80211.DataDataFrame.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DataDataFrame" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataDataFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.DataDataFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.DataFrame"> <summary> Data frame. </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.SourceAddress"> <summary> SourceAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.DestinationAddress"> <summary> DestinationAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.ReceiverAddress"> <summary> ReceiverAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.TransmitterAddress"> <summary> TransmitterAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.BssId"> <summary> BssID </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.SequenceControlBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.DataFrame.SequenceControl"> <summary> Sequence control field </summary> </member> <member name="M:PacketDotNet.Ieee80211.DataFrame.AssignDefaultAddresses"> <summary> Assigns the default MAC address of 00-00-00-00-00-00 to all address fields. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DataFrame.ReadAddresses"> <summary> Reads the addresses from the backing ByteArraySegment into the the address properties. </summary> <remarks> The <see cref="T:PacketDotNet.Ieee80211.FrameControlField" /> ToDS and FromDS properties dictate which of the 4 possible address fields is read into which address property. </remarks> </member> <member name="M:PacketDotNet.Ieee80211.DataFrame.WriteAddressBytes"> <summary> Writes the address properties into the backing <see cref="T:PacketDotNet.Utils.ByteArraySegment" />. </summary> <remarks> The address position into which a particular address property is written is determined by the value of <see cref="T:PacketDotNet.Ieee80211.FrameControlField" /> ToDS and FromDS properties. </remarks> </member> <member name="M:PacketDotNet.Ieee80211.DataFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.DisassociationFrame"> <summary> Disassociation frame. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DisassociationFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DisassociationFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DisassociationFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (MAC Address of the Access Point). </param> </member> <member name="P:PacketDotNet.Ieee80211.DisassociationFrame.Reason"> <summary> Gets or sets the reason for disassociation. </summary> <value> The reason. </value> </member> <member name="P:PacketDotNet.Ieee80211.DisassociationFrame.FrameSize"> <summary> Gets the size of the frame. </summary> <value> The size of the frame. </value> </member> <member name="M:PacketDotNet.Ieee80211.DisassociationFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.DurationField"> <summary> Duration field. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DurationField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DurationField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DurationField.#ctor(System.UInt16)"> <summary> Constructor </summary> <param name="field"> A <see cref="T:System.UInt16" /></param> </member> <member name="P:PacketDotNet.Ieee80211.DurationField.Field"> <summary> This is the raw Duration field </summary> </member> <member name="T:PacketDotNet.Ieee80211.FrameControlField"> <summary> Every 802.11 frame has a control field that contains information about the frame including the 802.11 protocol version, frame type, and various indicators, such as whether WEP is on, power management is active. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FrameControlField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.FrameControlField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FrameControlField.#ctor(System.UInt16)"> <summary> Constructor </summary> <param name="field"> A <see cref="T:System.UInt16" /></param> </member> <member name="T:PacketDotNet.Ieee80211.FrameControlField.FrameTypes"> <summary> Specifies the main frame type: Control, Management or Data. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameTypes.Management"> <summary> Management frame. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameTypes.Control"> <summary> Control frame. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameTypes.Data"> <summary> Data frame. </summary> </member> <member name="T:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes"> <summary> Sepcifies the frame types down to the sub type level. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementAssociationRequest"> <summary> Association request </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementAssociationResponse"> <summary> Association response </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementReassociationRequest"> <summary> Reassociation request </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementReassociationResponse"> <summary> Reassociation response </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementProbeRequest"> <summary> Probe request </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementProbeResponse"> <summary> Probe response </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementReserved0"> <summary> Reserved 0 </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementReserved1"> <summary> Reserved 1 </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementBeacon"> <summary> Beacon </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementATIM"> <summary> ATIM </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementDisassociation"> <summary> Disassociation </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementAuthentication"> <summary> Authentication </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementDeauthentication"> <summary> Deauthentication </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementAction"> <summary> Reserved 2 </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ManagementReserved3"> <summary> Reserved 3 </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlBlockAcknowledgmentRequest"> <summary> Blck Acknowledgment Request (QOS) </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlBlockAcknowledgment"> <summary> Blck Acknowledgment (QOS) </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlPSPoll"> <summary> PS poll </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlRTS"> <summary> RTS </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlCTS"> <summary> CTS </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlACK"> <summary> ACK </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlCFEnd"> <summary> CF-End </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.ControlCFEndCFACK"> <summary> CF-End CF-Ack </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.Data"> <summary> Data </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFACK"> <summary> CF-ACK </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFPoll"> <summary> CF-Poll </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFAckCFPoll"> <summary> CF-Ack CF-Poll </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataNullFunctionNoData"> <summary> Null function no data </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFAckNoData"> <summary> CF-Ack No data </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFPollNoData"> <summary> CF-Poll no data </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.DataCFAckCFPollNoData"> <summary> CF-Ack CF-Poll no data </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosData"> <summary> Constant qos data. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosDataAndCFAck"> <summary> Constant qos data and CF ack. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosDataAndCFPoll"> <summary> Constant qos data and CF poll. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosDataAndCFAckAndCFPoll"> <summary> Constant qos data and CF ack and CF poll. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosNullData"> <summary> Constant qos null data. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosCFAck"> <summary> Constant qos CF ack. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosCFPoll"> <summary> Constant qos CF poll. </summary> </member> <member name="F:PacketDotNet.Ieee80211.FrameControlField.FrameSubTypes.QosCFAckAndCFPoll"> <summary> Constant qos CF ack and CF poll. </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.ProtocolVersion"> <summary> Protocol version </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.Type"> <summary> Gets the type of the frame. </summary> <value> The type. </value> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.SubType"> <summary> Helps to identify the type of WLAN frame, control data and management are the various frame types defined in IEEE 802.11 </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.ToDS"> <summary> Is set to 1 when the frame is sent to Distribution System (DS) </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.FromDS"> <summary> Is set to 1 when the frame is received from the Distribution System (DS) </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.MoreFragments"> <summary> More Fragment is set to 1 when there are more fragments belonging to the same frame following the current fragment </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.Retry"> <summary> Indicates that this fragment is a retransmission of a previously transmitted fragment. (For receiver to recognize duplicate transmissions of frames) </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.PowerManagement"> <summary> Indicates the power management mode that the station will be in after the transmission of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.MoreData"> <summary> Indicates that there are more frames buffered for this station </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.Wep"> <summary> Indicates that the frame body is encrypted according to the WEP (wired equivalent privacy) algorithm </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.Order"> <summary> Bit is set when the "strict ordering" delivery method is employed. Frames and fragments are not always sent in order as it causes a transmission performance penalty. </summary> </member> <member name="P:PacketDotNet.Ieee80211.FrameControlField.Field"> <summary> Gets or sets the field. </summary> <value> The field. </value> </member> <member name="M:PacketDotNet.Ieee80211.FrameControlField.ToString"> <summary> Returns a <see cref="T:System.String" /> that represents the current <see cref="T:PacketDotNet.Ieee80211.FrameControlField" />. </summary> <returns> A <see cref="T:System.String" /> that represents the current <see cref="T:PacketDotNet.Ieee80211.FrameControlField" />. </returns> </member> <member name="T:PacketDotNet.Ieee80211.InformationElement"> <summary> Information element, a variable-length component of management frames </summary> <exception cref="T:System.ArgumentException"> Is thrown when an argument passed to a method is invalid. </exception> </member> <member name="M:PacketDotNet.Ieee80211.InformationElement.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.InformationElement" /> class. </summary> <param name="bas"> The bytes of the information element. The Offset property should point to the first byte of the element, the Id byte </param> </member> <member name="M:PacketDotNet.Ieee80211.InformationElement.#ctor(PacketDotNet.Ieee80211.InformationElement.ElementId,System.Byte[])"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.InformationElement" /> class. </summary> <param name="id"> Identifier. </param> <param name="value"> Value. </param> <exception cref="T:System.ArgumentException"> Is thrown when an argument passed to a method is invalid. </exception> </member> <member name="T:PacketDotNet.Ieee80211.InformationElement.ElementId"> <summary> Types of information elements </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ServiceSetIdentity"> <summary> Assign an identifier to the service set </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.SupportedRates"> <summary> Specifies the data rates supported by the network </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.FhParamterSet"> <summary> Provides the parameters necessary to join a frequency-hopping 802.11 network </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.DsParameterSet"> <summary> Direct-sequence 802.11 networks have one parameter, the channel number of the network </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.CfParameterSet"> <summary> Contention-free parameter. Transmitted in Becons by access points that support contention-free operation. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.TrafficIndicationMap"> <summary> Indicates which stations have buffered traffic waiting to be picked up </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.IbssParameterSet"> <summary> Indicates the number of time units (TUs) between ATIM frames in an IBSS. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.Country"> <summary> Specifies regulatory constraints stations must adhere to based on the country the network is operating in. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.HoppingParametersPattern"> <summary> Specifies the hopping pattern of timeslots used in frequency hopping physical layers. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.HoppingPatternTable"> <summary> Specifies the hopping pattern table used in frequency hopping physical layers. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.Request"> <summary> Specifies the Ids of the information elements being requested in a <see cref="T:PacketDotNet.Ieee80211.ProbeRequestFrame" />. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ChallengeText"> <summary> Specifies the encrypted challenge text that stations must decrypt as part of the authentication process. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.PowerContstraint"> <summary> Specifies the difference between the regulatory maximum transmit power and any local constraint. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.PowerCapability"> <summary> Specifies the minimum and maximum transmit power a station is capable of. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.TransmitPowerControlRequest"> <summary> Used to request radio link management information. This type of information element never has an associated value. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.TransmitPowerControlReport"> <summary> Radio link managment report used by stations to tune their transmission power. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.SupportedChannels"> <summary> Specifies local constraints on the channels in use. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ChannelSwitchAnnouncement"> <summary> Announces an impending change of channel for the network. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.MeasurementRequest"> <summary> Requests a report on the state of the radio channel. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.MeasurementReport"> <summary> A report of on the status of the radio channel. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.Quiet"> <summary> Specifies the scheduling of temporary quiet periods on the channel. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.IbssDfs"> <summary> Specifies the details the Dynamic Frequency Selection (DFS) algorithm in use in the IBSS. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ErpInformation"> <summary> Indicates whether or not the Extended Rate PHY is in use on the network at that time. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.HighThroughputCapabilities"> <summary> Specifies a stations high throughput capabilities. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.RobustSecurityNetwork"> <summary> Specifies details of the Robust Security Network encryption in use on the network. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ExtendedSupportedRates"> <summary> Specifies more data rates supported by the network. This is identical to the Supported Rates element but it allows for a longer value. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.HighThroughputInformation"> <summary> Specified how high throughput capable stations will be operated in the network. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.WifiProtectedAccess"> <summary> Specifies details of the WiFi Protected Access encryption in use on the network. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementId.VendorSpecific"> <summary> Non standard information element implemented by the hardware vendor. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementIdLength"> <summary> The length in bytes of the Information Element id field. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementLengthLength"> <summary> The length in bytes of the Information Element length field. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementIdPosition"> <summary> The index of the id field in an Information Element. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementLengthPosition"> <summary> The index of the length field in an Information Element. </summary> </member> <member name="F:PacketDotNet.Ieee80211.InformationElement.ElementValuePosition"> <summary> The index of the first byte of the value field in an Information Element. </summary> </member> <member name="P:PacketDotNet.Ieee80211.InformationElement.Id"> <summary> Gets or sets the identifier. </summary> <value> The identifier. </value> </member> <member name="P:PacketDotNet.Ieee80211.InformationElement.ValueLength"> <summary> Gets the length. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.InformationElement.ElementLength"> <summary> Gets the length of the element including the Id and Length field </summary> <value> The length of the element. </value> </member> <member name="P:PacketDotNet.Ieee80211.InformationElement.Value"> <summary> Gets or sets the value of the element </summary> <value> The value. </value> <exception cref="T:System.ArgumentException"> Is thrown when the value is too large. Values are limited to a maximum size 255 bytes due the single byte length field. </exception> </member> <member name="P:PacketDotNet.Ieee80211.InformationElement.Bytes"> <summary> Gets the bytes. </summary> <value> The bytes. </value> </member> <member name="M:PacketDotNet.Ieee80211.InformationElement.Equals(System.Object)"> <summary> Determines whether the specified <see cref="T:System.Object" /> is equal to the current <see cref="T:PacketDotNet.Ieee80211.InformationElement" />. </summary> <param name="obj"> The <see cref="T:System.Object" /> to compare with the current <see cref="T:PacketDotNet.Ieee80211.InformationElement" />. </param> <returns> <c>true</c> if the specified <see cref="T:System.Object" /> is equal to the current <see cref="T:PacketDotNet.Ieee80211.InformationElement" />; otherwise, <c>false</c>. </returns> </member> <member name="M:PacketDotNet.Ieee80211.InformationElement.GetHashCode"> <summary> Serves as a hash function for a <see cref="T:PacketDotNet.Ieee80211.InformationElement" /> object. </summary> <returns> A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. </returns> </member> <member name="T:PacketDotNet.Ieee80211.MacFields"> <summary> NOTE: All positions are not defined here because the frame type changes whether some address fields are present or not, causing the sequence control field to move. In addition the payload size determines where the frame control sequence value is as it is after the payload bytes, if any payload is present </summary> </member> <member name="F:PacketDotNet.Ieee80211.MacFields.SequenceControlPosition"> <summary> Not all MAC Frames contain a sequence control field. The value of this field is only meaningful when they do. </summary> </member> <member name="T:PacketDotNet.Ieee80211.MacFrame"> <summary> Base class of all 802.11 frame types </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.FrameControlBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.FrameControl"> <summary> Frame control field </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.DurationBytes"> <summary> Duration bytes are the third and fourth bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.Duration"> <summary> Gets or sets the duration value. The value represents the number of microseconds the the wireless medium is expected to remain busy. </summary> <value> The duration field value </value> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.FrameCheckSequence"> <summary> Frame check sequence, the last thing in the 802.11 mac packet </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.FCSValid"> <summary> FCSs the valid. </summary> <returns> The valid. </returns> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.AppendFcs"> <summary> Gets or sets a value indicating whether this <see cref="T:PacketDotNet.Ieee80211.MacFrame" /> should include an FCS at the end of the array returned by Bytes. </summary> <value> <c>true</c> if append FCS should be appended; otherwise, <c>false</c>. </value> </member> <member name="P:PacketDotNet.Ieee80211.MacFrame.BytesHighPerformance"> <value> The option to return a ByteArraySegment means that this method is higher performance as the data can start at an offset other than the first byte. </value> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.SetAddress(System.Int32,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Writes the address into the specified address position. </summary> <remarks>The number of valid address positions in a MAC frame is determined by the type of frame. There are between 1 and 4 address fields in MAC frames</remarks> <param name="addressIndex">Zero based address to look up</param> <param name="address"> </param> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.SetAddressByOffset(System.Int32,System.Net.NetworkInformation.PhysicalAddress)"> <summary> Writes the provided address into the backing <see cref="T:PacketDotNet.Utils.ByteArraySegment" /> starting at the provided offset. </summary> <param name="offset"> The position where the address should start to be copied </param> <param name="address"> Address. </param> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.GetAddress(System.Int32)"> <summary> Gets the address. There can be up to four addresses in a MacFrame depending on its type. </summary> <returns> The address. </returns> <param name="addressIndex"> Address index. </param> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.GetAddressByOffset(System.Int32)"> <summary> Gets an address by offset. </summary> <returns> The address as the specified index. </returns> <param name="offset"> The offset into the packet buffer at which to start parsing the address. </param> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.UpdateFrameCheckSequence"> <summary> Recalculates and updates the frame check sequence. </summary> <remarks>After calling this method the FCS will be valud regardless of what the packet contains.</remarks> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.GetAvailablePayloadLength"> <summary> Returns the number of bytes of payload data currently available in the buffer. </summary> <remarks>This method is used to work out how much space there is for the payload in the underlying ByteArraySegment. To find out the length of actual payload assigned to the packet use PayloadData.Length.</remarks> <value> The number of bytes of space available after the header for payload data. </value> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.ParsePacketWithFcs(PacketDotNet.Utils.ByteArraySegment)"> <summary> Parses the <see cref="T:PacketDotNet.Utils.ByteArraySegment" /> into a MacFrame. </summary> <returns> The parsed MacFrame or null if it could not be parsed. </returns> <param name="bas"> The bytes of the packet. bas.Offset should point to the first byte in the mac frame. </param> <remarks>If the provided bytes dont contain the FCS then call <see cref="M:PacketDotNet.Ieee80211.MacFrame.ParsePacket(PacketDotNet.Utils.ByteArraySegment)" /> instead. The presence of the FCS is usually determined by configuration of the device used to capture the packets.</remarks> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.ParsePacket(PacketDotNet.Utils.ByteArraySegment)"> <summary> Parses the <see cref="T:PacketDotNet.Utils.ByteArraySegment" /> into a MacFrame. </summary> <returns> The parsed MacFrame or null if it could not be parsed. </returns> <param name="bas"> The bytes of the packet. bas.Offset should point to the first byte in the mac frame. </param> <remarks>If the provided bytes contain the FCS then call <see cref="M:PacketDotNet.Ieee80211.MacFrame.ParsePacketWithFcs(PacketDotNet.Utils.ByteArraySegment)" /> instead. The presence of the FCS is usually determined by configuration of the device used to capture the packets.</remarks> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.PerformFcsCheck(System.Byte[],System.Int32,System.Int32,System.UInt32)"> <summary> Calculates the FCS value for the provided bytes and compates it to the FCS value passed to the method. </summary> <returns> true if the FCS for the provided bytes matches the FCS passed in, false if not. </returns> <param name="data"> The byte array for which the FCS will be calculated. </param> <param name="offset"> The offset into data of the first byte to be covered by the FCS. </param> <param name="length"> The number of bytes to calculate the FCS for. </param> <param name="fcs"> The FCS to compare to the one calculated for the provided data. </param> <remarks>This method can be used to check the validity of a packet before attempting to parse it with either <see cref="M:PacketDotNet.Ieee80211.MacFrame.ParsePacket(PacketDotNet.Utils.ByteArraySegment)" /> or <see cref="M:PacketDotNet.Ieee80211.MacFrame.ParsePacketWithFcs(PacketDotNet.Utils.ByteArraySegment)" />. Attempting to parse a corrupted buffer using these methods could cause unexpected exceptions.</remarks> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="M:PacketDotNet.Ieee80211.MacFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.ManagementFrame"> <summary> Format of a CTS or an ACK frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.ManagementFrame.DestinationAddress"> <summary> DestinationAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.ManagementFrame.SourceAddress"> <summary> SourceAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.ManagementFrame.BssId"> <summary> BssID </summary> </member> <member name="P:PacketDotNet.Ieee80211.ManagementFrame.SequenceControlBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.ManagementFrame.SequenceControl"> <summary> Sequence control field </summary> </member> <member name="M:PacketDotNet.Ieee80211.ManagementFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.NullDataFrame"> <summary> Null data frames are like normal data frames except they carry no payload. They are primarily used for control purposes such as power management or telling an Access Point to buffer packets while a station scans other channels. </summary> </member> <member name="M:PacketDotNet.Ieee80211.NullDataFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.NullDataFrame" /> class. </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.NullDataFrame.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.NullDataFrame" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.NullDataFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="M:PacketDotNet.Ieee80211.NullDataFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.ProbeRequestFrame"> <summary> Probe request frames are used by stations to scan the area for existing networks. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ProbeRequestFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ProbeRequestFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ProbeRequestFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (Mac Address of the Access Point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.ProbeRequestFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="P:PacketDotNet.Ieee80211.ProbeRequestFrame.InformationElements"> <summary> Gets or sets the information elements included in the frame. </summary> <value> The information elements. </value> <remarks>Probe request frames normally contain information elements for <see cref="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ServiceSetIdentity" />, <see cref="F:PacketDotNet.Ieee80211.InformationElement.ElementId.SupportedRates" /> and <see cref="F:PacketDotNet.Ieee80211.InformationElement.ElementId.ExtendedSupportedRates" /> in that order.</remarks> </member> <member name="M:PacketDotNet.Ieee80211.ProbeRequestFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.ProbeResponseFrame"> <summary> Probe response frames are sent by Access Points in response to probe requests by stations. An access point may respond to a probe request if it hosts a network with parameters compatible with those requested by the station. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ProbeResponseFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ProbeResponseFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.NetworkInformation.PhysicalAddress,PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ProbeResponseFrame" /> class. </summary> <param name="SourceAddress"> Source address. </param> <param name="DestinationAddress"> Destination address. </param> <param name="BssId"> Bss identifier (Mac address of the access point). </param> <param name="InformationElements"> Information elements. </param> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.Timestamp"> <summary> Gets or sets the timestamp. The timestamp is used by a station to ensure that it is using the most up to date parameters for the network. </summary> <value> The timestamp. </value> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.BeaconInterval"> <summary> Gets or sets the beacon interval. This is the minimum time between beacon frames from the access point. </summary> <value> The beacon interval. </value> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.CapabilityInformationBytes"> <summary> Frame control bytes are the first two bytes of the frame </summary> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.CapabilityInformation"> <summary> Get or set the capability information field that defines the capabilities of the network. </summary> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.InformationElements"> <summary> Gets or sets the information elements included in the frame. </summary> <value> The information elements. </value> </member> <member name="P:PacketDotNet.Ieee80211.ProbeResponseFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ProbeResponseFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.QosDataFrame"> <summary> Qos data frames are like regualr data frames except they contain a quality of service field as deinfed in the 802.11e standard. </summary> </member> <member name="M:PacketDotNet.Ieee80211.QosDataFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.QosDataFrame" /> class. </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.QosDataFrame.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.QosDataFrame" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.QosDataFrame.QosControl"> <summary> Gets or sets the qos control field. </summary> <value> The qos control field. </value> </member> <member name="P:PacketDotNet.Ieee80211.QosDataFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="M:PacketDotNet.Ieee80211.QosDataFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.QosNullDataFrame"> <summary> The Qos null data frame serves the same purpose as <see cref="T:PacketDotNet.Ieee80211.NullDataFrame" /> but also includes a quality of service control field. </summary> </member> <member name="M:PacketDotNet.Ieee80211.QosNullDataFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.QosNullDataFrame" /> class. </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.QosNullDataFrame.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.QosNullDataFrame" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.QosNullDataFrame.QosControl"> <summary> Gets or sets the qos control field. </summary> <value> The qos control field. </value> </member> <member name="P:PacketDotNet.Ieee80211.QosNullDataFrame.FrameSize"> <summary> Length of the frame header. This does not include the FCS, it represents only the header bytes that would would preceed any payload. </summary> </member> <member name="M:PacketDotNet.Ieee80211.QosNullDataFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="T:PacketDotNet.Ieee80211.RadioPacket"> <summary> .Net analog of a ieee80211_radiotap_header from airpcap.h </summary> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.RadioPacket" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioPacket.Item(PacketDotNet.Ieee80211.RadioTapType)"> <summary> Gets the <see cref="T:PacketDotNet.Ieee80211.RadioTapField" /> with the specified type, or null if the field is not in the packet. </summary> <param name="type"> Radio Tap field type </param> </member> <member name="P:PacketDotNet.Ieee80211.RadioPacket.Version"> <summary> Version 0. Only increases for drastic changes, introduction of compatible new fields does not count. </summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioPacket.Length"> <summary> Length of the whole header in bytes, including it_version, it_pad, it_len and data fields </summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioPacket.Present"> <summary> Returns an array of UInt32 bitmap entries. Each bit in the bitmap indicates which fields are present. Set bit 31 (0x8000000) to extend the bitmap by another 32 bits. Additional extensions are made by setting bit 31. </summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioPacket.RadioTapFields"> <summary> Array of radio tap fields </summary> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.Add(PacketDotNet.Ieee80211.RadioTapField)"> <summary> Add the specified field to the packet. </summary> <param name="field"> Field to be added </param> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.Remove(PacketDotNet.Ieee80211.RadioTapType)"> <summary> Removes a field of the specified type if one is present in the packet. </summary> <param name="fieldType"> Field type. </param> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.Contains(PacketDotNet.Ieee80211.RadioTapType)"> <summary> Checks for the presence of a field of the specified type in the packet. </summary> <param name="fieldType"> The field type to check for. </param> <returns> <c>true</c> if the packet contains a field of the specified type; otherwise, <c>false</c>.</returns> </member> <member name="M:PacketDotNet.Ieee80211.RadioPacket.UpdateCalculatedValues"> <summary> Called to ensure that field values are updated before the packet bytes are retrieved </summary> </member> <member name="T:PacketDotNet.Ieee80211.RadioFields"> <summary> As defined by Airpcap.h NOTE: PresentPosition may not be the only position present as this the field can be extended if the high bit is set </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.VersionLength"> <summary>Length of the version field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.PadLength"> <summary>Length of the pad field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.LengthLength"> <summary>Length of the length field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.PresentLength"> <summary>Length of the first present field (others may follow)</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.VersionPosition"> <summary>Position of the version field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.PadPosition"> <summary>Position of the padding field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.LengthPosition"> <summary>Position of the length field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.PresentPosition"> <summary>Position of the first present field</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioFields.DefaultHeaderLength"> <summary>Default header length, assuming one present field entry</summary> </member> <member name="T:PacketDotNet.Ieee80211.RadioTapChannelFlags"> <summary> Channel flags </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Turbo"> <summary>Turbo channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Cck"> <summary>CCK channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Ofdm"> <summary>OFDM channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Channel2Ghz"> <summary>2 GHz spectrum channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Channel5Ghz"> <summary>5 GHz spectrum channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Passive"> <summary>Only passive scan allowed</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.DynamicCckOfdm"> <summary>Dynamic CCK-OFDM channel</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.Gfsk"> <summary>GFSK channel (FHSS PHY)</summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapChannelFlags.StaticTurbo"> <summary>11a static turbo channel only</summary> </member> <member name="T:PacketDotNet.Ieee80211.ChannelRadioTapField"> <summary> Channel field </summary> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ChannelRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.#ctor(System.UInt16,PacketDotNet.Ieee80211.RadioTapChannelFlags)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.ChannelRadioTapField" /> class. </summary> <param name="FrequencyMhz"> Tx/Rx Frequency in MHz. </param> <param name="Flags"> Flags. </param> </member> <member name="F:PacketDotNet.Ieee80211.ChannelRadioTapField.Flags"> <summary> Channel flags </summary> </member> <member name="P:PacketDotNet.Ieee80211.ChannelRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.ChannelRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.ChannelRadioTapField.FrequencyMHz"> <summary> Frequency in MHz </summary> </member> <member name="P:PacketDotNet.Ieee80211.ChannelRadioTapField.Channel"> <summary> Channel number derived from frequency </summary> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.ChannelFromFrequencyMHz(System.Int32)"> <summary> Convert a frequency to a channel </summary> <remarks>There is some overlap between the 802.11b/g channel numbers and the 802.11a channel numbers. This means that while a particular frequncy will only ever map to single channel number the same channel number may be returned for more than one frequency. At present this affects channel numbers 8 and 12.</remarks> <param name="frequencyMHz"> A <see cref="T:System.Int32" /></param> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.ChannelRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.FhssRadioTapField"> <summary> Fhss radio tap field </summary> </member> <member name="M:PacketDotNet.Ieee80211.FhssRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.FhssRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.FhssRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FhssRadioTapField.#ctor(System.Byte,System.Byte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.FhssRadioTapField" /> class. </summary> <param name="ChannelHoppingSet"> Channel hopping set. </param> <param name="Pattern"> Channel hopping pattern. </param> </member> <member name="P:PacketDotNet.Ieee80211.FhssRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.FhssRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.FhssRadioTapField.ChannelHoppingSet"> <summary> Hop set </summary> </member> <member name="P:PacketDotNet.Ieee80211.FhssRadioTapField.Pattern"> <summary> Hop pattern </summary> </member> <member name="M:PacketDotNet.Ieee80211.FhssRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FhssRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.FlagsRadioTapField"> <summary> Radio tap flags </summary> </member> <member name="M:PacketDotNet.Ieee80211.FlagsRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.FlagsRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.FlagsRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FlagsRadioTapField.#ctor(PacketDotNet.Ieee80211.RadioTapFlags)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.FlagsRadioTapField" /> class. </summary> <param name="Flags"> Flags. </param> </member> <member name="F:PacketDotNet.Ieee80211.FlagsRadioTapField.Flags"> <summary> Flags set </summary> </member> <member name="P:PacketDotNet.Ieee80211.FlagsRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.FlagsRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="M:PacketDotNet.Ieee80211.FlagsRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.FlagsRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.RateRadioTapField"> <summary> Rate field </summary> </member> <member name="M:PacketDotNet.Ieee80211.RateRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.RateRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.RateRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.RateRadioTapField.#ctor(System.Double)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.RateRadioTapField" /> class. </summary> <param name="RateMbps"> Rate mbps. </param> </member> <member name="P:PacketDotNet.Ieee80211.RateRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.RateRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.RateRadioTapField.RateMbps"> <summary> Rate in Mbps </summary> </member> <member name="M:PacketDotNet.Ieee80211.RateRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.RateRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField"> <summary> Db antenna signal </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.#ctor(System.Byte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField" /> class. </summary> <param name="SignalStrengthdB"> Signal strength in dB </param> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.SignalStrengthdB"> <summary> Signal strength in dB </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaSignalRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField"> <summary> Antenna noise in dB </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.#ctor(System.Byte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField" /> class. </summary> <param name="AntennaNoisedB"> Antenna signal noise in dB. </param> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.AntennaNoisedB"> <summary> Antenna noise in dB </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbAntennaNoiseRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.AntennaRadioTapField"> <summary> Antenna field </summary> </member> <member name="M:PacketDotNet.Ieee80211.AntennaRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.AntennaRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AntennaRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AntennaRadioTapField.#ctor(System.Byte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AntennaRadioTapField" /> class. </summary> <param name="Antenna"> Antenna index of the Rx/Tx antenna for this packet. The first antenna is antenna 0. </param> </member> <member name="P:PacketDotNet.Ieee80211.AntennaRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.AntennaRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.AntennaRadioTapField.Antenna"> <summary> Antenna number </summary> </member> <member name="M:PacketDotNet.Ieee80211.AntennaRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AntennaRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField"> <summary> Antenna signal in dBm </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.#ctor(System.SByte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField" /> class. </summary> <param name="AntennaSignalDbm"> Antenna signal power in dB. </param> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.AntennaSignalDbm"> <summary> Antenna signal in dBm </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaSignalRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField"> <summary> Antenna noise in dBm </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.#ctor(System.SByte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField" /> class. </summary> <param name="AntennaNoisedBm"> Antenna noise in dBm. </param> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.AntennaNoisedBm"> <summary> Antenna noise in dBm </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmAntennaNoiseRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.LockQualityRadioTapField"> <summary> Lock quality </summary> </member> <member name="M:PacketDotNet.Ieee80211.LockQualityRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.LockQualityRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.LockQualityRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.LockQualityRadioTapField.#ctor(System.UInt16)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.LockQualityRadioTapField" /> class. </summary> <param name="SignalQuality"> Signal quality. </param> </member> <member name="P:PacketDotNet.Ieee80211.LockQualityRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.LockQualityRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.LockQualityRadioTapField.SignalQuality"> <summary> Signal quality </summary> </member> <member name="M:PacketDotNet.Ieee80211.LockQualityRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.LockQualityRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.TsftRadioTapField"> <summary> Tsft radio tap field </summary> </member> <member name="M:PacketDotNet.Ieee80211.TsftRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.TsftRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.TsftRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.TsftRadioTapField.#ctor(System.UInt64)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.TsftRadioTapField" /> class. </summary> <param name="TimestampUsec"> Value in microseconds of the Time Synchronization Function timer </param> </member> <member name="P:PacketDotNet.Ieee80211.TsftRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.TsftRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.TsftRadioTapField.TimestampUsec"> <summary> Timestamp in microseconds </summary> </member> <member name="M:PacketDotNet.Ieee80211.TsftRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.TsftRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.RxFlagsRadioTapField"> <summary> Contains properties about the received from. </summary> </member> <member name="M:PacketDotNet.Ieee80211.RxFlagsRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.RxFlagsRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.RxFlagsRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.RxFlagsRadioTapField.#ctor(System.Boolean)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.RxFlagsRadioTapField" /> class. </summary> <param name="PlcpCrcCheckFailed"> PLCP CRC check failed. </param> </member> <member name="P:PacketDotNet.Ieee80211.RxFlagsRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.RxFlagsRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.RxFlagsRadioTapField.PlcpCrcCheckFailed"> <summary> Gets or sets a value indicating whether the frame failed the PLCP CRC check. </summary> <value> <c>true</c> if the PLCP CRC check failed; otherwise, <c>false</c>. </value> </member> <member name="M:PacketDotNet.Ieee80211.RxFlagsRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.RxFlagsRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.TxAttenuationRadioTapField"> <summary> Transmit power expressed as unitless distance from max power set at factory calibration. 0 is max power. Monotonically nondecreasing with lower power levels. </summary> </member> <member name="M:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.TxAttenuationRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.#ctor(System.Int32)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.TxAttenuationRadioTapField" /> class. </summary> <param name="TxPower"> Transmit power expressed as unitless distance from max power set at factory calibration. 0 is max power. </param> </member> <member name="P:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.TxPower"> <summary> Transmit power </summary> </member> <member name="M:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.TxAttenuationRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField"> <summary> Transmit power expressed as decibel distance from max power set at factory calibration. 0 is max power. Monotonically nondecreasing with lower power levels. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.#ctor(System.Int32)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField" /> class. </summary> <param name="TxPowerdB"> Transmit power expressed as decibel distance from max power set at factory calibration. 0 is max power. </param> </member> <member name="P:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.TxPowerdB"> <summary> Transmit power </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbTxAttenuationRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField"> <summary> Transmit power expressed as dBm (decibels from a 1 milliwatt reference). This is the absolute power level measured at the antenna port. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.#ctor(System.IO.BinaryReader)"> <summary> Constructor </summary> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> </member> <member name="M:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.#ctor(System.SByte)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField" /> class. </summary> <param name="TxPowerdBm"> Transmit power expressed as dBm (decibels from a 1 milliwatt reference). </param> </member> <member name="P:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.TxPowerdBm"> <summary> Tx power in dBm </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="M:PacketDotNet.Ieee80211.DbmTxPowerRadioTapField.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.RadioTapField"> <summary> Abstract class for all radio tap fields </summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioTapField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.RadioTapField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="M:PacketDotNet.Ieee80211.RadioTapField.Parse(System.Int32,System.IO.BinaryReader)"> <summary> Parse a radio tap field, indicated by bitIndex, from a given BinaryReader </summary> <param name="bitIndex"> A <see cref="T:System.Int32" /></param> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> <returns> A <see cref="T:PacketDotNet.Ieee80211.RadioTapField" /></returns> </member> <member name="M:PacketDotNet.Ieee80211.RadioTapField.CopyTo(System.Byte[],System.Int32)"> <summary> Copies the field data to the destination buffer at the specified offset. </summary> </member> <member name="T:PacketDotNet.Ieee80211.RadioTapFlags"> <summary> Radio tap flags </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.CFP"> <summary> sent/received during cfp </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.ShortPreamble"> <summary> sent/received with short preamble </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.WepEncrypted"> <summary> sent/received with WEP encryption </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.Fragmentation"> <summary> sent/received with fragmentation </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.FcsIncludedInFrame"> <summary> frame includes FCS </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.PostFramePadding"> <summary> frame includes padding to the 32 bit boundary between the 802.11 header and the payload </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapFlags.FailedFcsCheck"> <summary> fFrame failed the fcs check </summary> </member> <member name="T:PacketDotNet.Ieee80211.RadioTapType"> <summary> NOTE: Might be out-of-date information since it mentions Ethereal NOTE: ethereal does NOT handle the following: IEEE80211_RADIOTAP_FHSS: IEEE80211_RADIOTAP_LOCK_QUALITY: IEEE80211_RADIOTAP_TX_ATTENUATION: IEEE80211_RADIOTAP_DB_TX_ATTENUATION: </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Tsft"> <summary> IEEE80211_RADIOTAP_TSFT u_int64_t microseconds Value in microseconds of the MAC's 64-bit 802.11 Time Synchronization Function timer when the first bit of the MPDU arrived at the MAC. For received frames, only. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Flags"> <summary> IEEE80211_RADIOTAP_FLAGS u_int8_t bitmap Properties of transmitted and received frames. See flags defined below. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Rate"> <summary> IEEE80211_RADIOTAP_RATE u_int8_t 500kb/s Tx/Rx data rate </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Channel"> <summary> IEEE80211_RADIOTAP_CHANNEL 2 x u_int16_t MHz, bitmap Tx/Rx frequency in MHz, followed by flags (see below). </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Fhss"> <summary> IEEE80211_RADIOTAP_FHSS u_int16_t see below For frequency-hopping radios, the hop set (first byte) and pattern (second byte). </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbmAntennaSignal"> <summary> IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from one milliwatt (dBm) RF signal power at the antenna, decibel difference from one milliwatt. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbmAntennaNoise"> <summary> IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from one milliwatt (dBm) RF noise power at the antenna, decibel difference from one milliwatt. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.LockQuality"> <summary> IEEE80211_RADIOTAP_LOCK_QUALITY u_int16_t unitless Quality of Barker code lock. Unitless. Monotonically nondecreasing with "better" lock strength. Called "Signal Quality" in datasheets. (Is there a standard way to measure this?) </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.TxAttenuation"> <summary> IEEE80211_RADIOTAP_TX_ATTENUATION u_int16_t unitless Transmit power expressed as unitless distance from max power set at factory calibration. 0 is max power. Monotonically nondecreasing with lower power levels. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbTxAttenuation"> <summary> IEEE80211_RADIOTAP_DB_TX_ATTENUATION u_int16_t decibels (dB) Transmit power expressed as decibel distance from max power set at factory calibration. 0 is max power. Monotonically nondecreasing with lower power levels. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbmTxPower"> <summary> IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from one milliwatt (dBm) Transmit power expressed as dBm (decibels from a 1 milliwatt reference). This is the absolute power level measured at the antenna port. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Antenna"> <summary> IEEE80211_RADIOTAP_ANTENNA u_int8_t antenna index Unitless indication of the Rx/Tx antenna for this packet. The first antenna is antenna 0. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbAntennaSignal"> <summary> IEEE80211_RADIOTAP_DB_ANTSIGNAL u_int8_t decibel (dB) RF signal power at the antenna, decibel difference from an arbitrary, fixed reference. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.DbAntennaNoise"> <summary> IEEE80211_RADIOTAP_DB_ANTNOISE u_int8_t decibel (dB) RF noise power at the antenna, decibel difference from an arbitrary, fixed reference point. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.RxFlags"> <summary> IEEE80211_RADIOTAP_RX_FLAGS u_int16_t bitmap Properties of received frames. </summary> </member> <member name="F:PacketDotNet.Ieee80211.RadioTapType.Extended"> <summary> Indicates that the flags bitmaps have been extended </summary> </member> <member name="T:PacketDotNet.Ieee80211.ReasonCode"> <summary> Specifies the reasons why a station may have been disassociated or deauthenticated by an access point. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.None"> <summary> No reason was given. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.Unspecified"> <summary> The reason was not specified. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.AuthNoLongerValid"> <summary> The previous authentication was no longer valid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.Leaving"> <summary> The station is leaving (or has left) the IBSS or ESS. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.Inactivity"> <summary> The station has been disassociated due to inactivity. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.OutOfResources"> <summary> The access point is unable to handle anymore associated stations. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.NeedAuthentication"> <summary> The station needs to be authenticated. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.NeedAssociation"> <summary> The station needs to be associated. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.LeavingToRoam"> <summary> The station is leaving the BSS. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.AssociationInvalid"> <summary> Association is invalid because the station is not authenticated. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.BadPower"> <summary> The Power Capability information is unacceptable. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.BadChannels"> <summary> The Supported Channels information is unacceptable. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.InvalidInformationElement"> <summary> An invalid information element has been provided. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.MessageIntegrityCheckFailure"> <summary> The message integrity check failed. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.FourwayHandshakeTimeout"> <summary> The 4way handshake has timed out. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.GroupKeyHandshakeTimeout"> <summary> The Group Key handshake has timed out. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.FourwayHandshakeInvalid"> <summary> An information element in the 4way handshake differs from in previous management frames. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.GroupCipherInvalid"> <summary> The group cipher is invalid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.PairwiseCipherInvalid"> <summary> The pairwise cipher is invalid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.AuthenticationKeyManagmentProtocolInvalid"> <summary> The Authentication Key Managment Protocol is invalid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RsnVersionUnsupported"> <summary> The provided RSN information element version is unsupported. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RsnCapabilitiesInvalid"> <summary> The provided RSN information element capabilities are invalid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.Ieee8021XFailure"> <summary> There has been an IEEE 802.1X authentication failure. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.CipherRejected"> <summary> The cipher suite has been rejected due to the security policy. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.QosUnspecified"> <summary> The station has been disassociated due to an unspecified QoS related reason. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.QosOutOfResources"> <summary> The access point lacks sufficient bandwidth for the station. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.PoorChannelConditions"> <summary> An excessive number of frames have failed to be acknowledged due to poor channel conditions. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.InvalidTxop"> <summary> The station is transmitting outside the limits of its TXOPs. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RequestedLeaving"> <summary> Disassociation was requested by the station as it is leaving the BSS. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RequestedNoUse"> <summary> Disassociation was requested by the station as it is no longer wants to use the mechanism. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RequestedNeedsSetup"> <summary> Disassociation was requested by the station as it requires setup to use the mechanism. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.RequestedDueToTimeout"> <summary> Disassociation was requested by the station due to a timeout. </summary> </member> <member name="F:PacketDotNet.Ieee80211.ReasonCode.CipherUnsupported"> <summary> The station does not support the cipher suite. </summary> </member> <member name="T:PacketDotNet.Ieee80211.RtsFrame"> <summary> RTS Frame has a ReceiverAddress[6], TransmitterAddress[6] and a FrameCheckSequence[4], these fields follow the common FrameControl[2] and DurationId[2] fields </summary> </member> <member name="M:PacketDotNet.Ieee80211.RtsFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.Ieee80211.RtsFrame.ReceiverAddress"> <summary> ReceiverAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.RtsFrame.TransmitterAddress"> <summary> TransmitterAddress </summary> </member> <member name="P:PacketDotNet.Ieee80211.RtsFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.RtsFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.SequenceControlField"> <summary> The Sequence control field occurs in management and data frames and is used to relate together fragmented payloads carried in multiple 802.11 frames. </summary> </member> <member name="M:PacketDotNet.Ieee80211.SequenceControlField.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.SequenceControlField" /> class. </summary> </member> <member name="M:PacketDotNet.Ieee80211.SequenceControlField.#ctor(System.UInt16)"> <summary> Constructor </summary> <param name="field"> A <see cref="T:System.UInt16" /></param> </member> <member name="P:PacketDotNet.Ieee80211.SequenceControlField.Field"> <summary> Gets or sets the field that backs all the other properties in the class. </summary> <value> The field. </value> </member> <member name="P:PacketDotNet.Ieee80211.SequenceControlField.SequenceNumber"> <summary> Gets or sets the sequence number. </summary> <value> The sequence number. </value> </member> <member name="P:PacketDotNet.Ieee80211.SequenceControlField.FragmentNumber"> <summary> Gets or sets the fragment number. </summary> <value> The fragment number. </value> </member> <member name="T:PacketDotNet.IpPacket"> <summary> Base class for IPv4 and IPv6 packets that exports the common functionality that both of these classes has in common </summary> </member> <member name="M:PacketDotNet.IpPacket.#ctor"> <summary> IpPacket constructor </summary> </member> <member name="F:PacketDotNet.IpPacket.DefaultTimeToLive"> <summary> The default time to live value for Ip packets being constructed </summary> </member> <member name="P:PacketDotNet.IpPacket.PayloadPacket"> <value> Payload packet, overridden to set the NextHeader/Protocol based on the type of payload packet when the payload packet is set </value> </member> <member name="P:PacketDotNet.IpPacket.DestinationAddress"> <value> The destination address </value> </member> <member name="P:PacketDotNet.IpPacket.SourceAddress"> <value> The source address </value> </member> <member name="P:PacketDotNet.IpPacket.Version"> <value> The IP version </value> </member> <member name="P:PacketDotNet.IpPacket.Protocol"> <value> The protocol of the ip packet's payload Named 'Protocol' in IPv4 Named 'NextHeader' in IPv6' </value> </member> <member name="P:PacketDotNet.IpPacket.NextHeader"> <value> The protocol of the ip packet's payload Included along side Protocol for user convienence </value> </member> <member name="P:PacketDotNet.IpPacket.TimeToLive"> <value> The number of hops remaining before this packet is discarded Named 'TimeToLive' in IPv4 Named 'HopLimit' in IPv6 </value> </member> <member name="P:PacketDotNet.IpPacket.HopLimit"> <value> The number of hops remaining for this packet Included along side of TimeToLive for user convienence </value> </member> <member name="P:PacketDotNet.IpPacket.HeaderLength"> <summary> ipv4 header length field, calculated for ipv6 packets NOTE: This field is the number of 32bit words in the ip header, ie. the number of bytes is 4x this value </summary> </member> <member name="P:PacketDotNet.IpPacket.TotalLength"> <summary> ipv4 total number of bytes in the ipv4 header + payload, ipv6 PayloadLength + IPv6Fields.HeaderLength </summary> </member> <member name="P:PacketDotNet.IpPacket.PayloadLength"> <summary> ipv6 payload length in bytes, calculate from ipv4.TotalLength - (ipv4.HeaderLength * 4) </summary> </member> <member name="M:PacketDotNet.IpPacket.AttachPseudoIPHeader(System.Byte[])"> <summary> Adds a pseudo ip header to a given packet. Used to generate the full byte array required to generate a udp or tcp checksum. </summary> <param name="origHeader"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:System.Byte" /></returns> </member> <member name="M:PacketDotNet.IpPacket.GetIPAddress(System.Net.Sockets.AddressFamily,System.Int32,System.Byte[])"> <summary> Convert an ip address from a byte[] </summary> <param name="ipType"> A <see cref="T:System.Net.Sockets.AddressFamily" /></param> <param name="fieldOffset"> A <see cref="T:System.Int32" /></param> <param name="bytes"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:System.Net.IPAddress" /></returns> </member> <member name="M:PacketDotNet.IpPacket.ParseEncapsulatedBytes(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.IPProtocolType,PacketDotNet.Packet)"> <summary> Called by IPv4 and IPv6 packets to parse their packet payload </summary> <param name="payload"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ProtocolType"> A <see cref="T:PacketDotNet.IPProtocolType" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.PacketOrByteArraySegment" /></returns> </member> <member name="M:PacketDotNet.IpPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the IpPacket inside of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.IpPacket" /></returns> </member> <member name="M:PacketDotNet.IpPacket.RandomPacket(PacketDotNet.IpVersion)"> <summary> Generate a random packet of a specific ip version </summary> <param name="version"> A <see cref="T:PacketDotNet.IpVersion" /></param> <returns> A <see cref="T:PacketDotNet.IpPacket" /></returns> </member> <member name="T:PacketDotNet.Packet"> <summary> Base class for all packet types. Defines helper methods and accessors for the architecture that underlies how packets interact and store their data. </summary> </member> <member name="M:PacketDotNet.Packet.#ctor"> <summary> Constructor </summary> </member> <member name="P:PacketDotNet.Packet.SharesMemoryWithSubPackets"> <value> Returns true if we already have a contiguous byte[] in either of these conditions: - This packet's header byte[] and payload byte[] are the same instance or - This packet's header byte[] and this packet's payload packet are the same instance and the offsets indicate that the bytes are contiguous </value> </member> <member name="P:PacketDotNet.Packet.ParentPacket"> <summary> The packet that is carrying this one </summary> </member> <member name="P:PacketDotNet.Packet.Header"> <value> Returns a </value> </member> <member name="P:PacketDotNet.Packet.PayloadPacket"> <summary> Packet that this packet carries if one is present. Note that the packet MAY have a null PayloadPacket but a non-null PayloadData </summary> </member> <member name="P:PacketDotNet.Packet.PayloadData"> <summary> Payload byte[] if one is present. Note that the packet MAY have a null PayloadData but a non-null PayloadPacket </summary> </member> <member name="P:PacketDotNet.Packet.Bytes"> <summary> byte[] containing this packet and its payload NOTE: Use 'public virtual ByteArraySegment BytesHighPerformance' for highest performance </summary> </member> <member name="P:PacketDotNet.Packet.BytesHighPerformance"> <value> The option to return a ByteArraySegment means that this method is higher performance as the data can start at an offset other than the first byte. </value> </member> <member name="P:PacketDotNet.Packet.Color"> <value> Color used when generating the text description of a packet </value> </member> <member name="M:PacketDotNet.Packet.ParsePacket(PacketDotNet.LinkLayers,System.Byte[])"> <summary> Parse bytes into a packet </summary> <param name="LinkLayer"> A <see cref="T:PacketDotNet.LinkLayers" /></param> <param name="PacketData"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="M:PacketDotNet.Packet.RecursivelyUpdateCalculatedValues"> <summary> Used to ensure that values like checksums and lengths are properly updated </summary> </member> <member name="M:PacketDotNet.Packet.UpdateCalculatedValues"> <summary> Called to ensure that calculated values are updated before the packet bytes are retrieved Classes should override this method to update things like checksums and lengths that take too much time or are too complex to update for each packet parameter change </summary> </member> <member name="M:PacketDotNet.Packet.ToString"> <summary>Output this packet as a readable string</summary> </member> <member name="M:PacketDotNet.Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString()"> Output the packet information in the specified format Normal - outputs the packet info to a single line Colored - outputs the packet info to a single line with coloring Verbose - outputs detailed info about the packet VerboseColored - outputs detailed info about the packet with coloring </summary> <param name="outputFormat"> <see cref="T:PacketDotNet.StringOutputType" /> </param> </member> <member name="M:PacketDotNet.Packet.PrintHex"> <summary> Prints the Packet PayloadData in Hex format With the 16-byte segment number, raw bytes, and parsed ascii output Ex: 0010 00 18 82 6c 7c 7f 00 c0 9f 77 a3 b0 88 64 11 00 ...1|... .w...d.. </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.SessionPacket"> <summary> Session layer packet </summary> </member> <member name="M:PacketDotNet.SessionPacket.#ctor"> <summary> Constructor </summary> </member> <member name="T:PacketDotNet.TcpPacket"> <summary> TcpPacket See: http://en.wikipedia.org/wiki/Transmission_Control_Protocol </summary> </member> <member name="M:PacketDotNet.TcpPacket.#ctor(System.UInt16,System.UInt16)"> <summary> Create a new TCP packet from values </summary> </member> <member name="M:PacketDotNet.TcpPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.TcpPacket.#ctor(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Packet)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> </member> <member name="F:PacketDotNet.TcpPacket.HeaderMinimumLength"> <value> 20 bytes is the smallest tcp header </value> </member> <member name="P:PacketDotNet.TcpPacket.SourcePort"> <summary> Fetch the port number on the source host.</summary> </member> <member name="P:PacketDotNet.TcpPacket.DestinationPort"> <summary> Fetches the port number on the destination host.</summary> </member> <member name="P:PacketDotNet.TcpPacket.SequenceNumber"> <summary> Fetch the packet sequence number.</summary> </member> <member name="P:PacketDotNet.TcpPacket.AcknowledgmentNumber"> <summary> Fetch the packet acknowledgment number.</summary> </member> <member name="P:PacketDotNet.TcpPacket.DataOffset"> <summary> The size of the tcp header in 32bit words </summary> </member> <member name="P:PacketDotNet.TcpPacket.WindowSize"> <summary> The size of the receive window, which specifies the number of bytes (beyond the sequence number in the acknowledgment field) that the receiver is currently willing to receive. </summary> </member> <member name="P:PacketDotNet.TcpPacket.Checksum"> <value> Tcp checksum field value of type UInt16 </value> </member> <member name="P:PacketDotNet.TcpPacket.ValidChecksum"> <summary> Check if the TCP packet is valid, checksum-wise.</summary> </member> <member name="P:PacketDotNet.TcpPacket.ValidTCPChecksum"> <value> True if the tcp checksum is valid </value> </member> <member name="P:PacketDotNet.TcpPacket.AllFlags"> <summary> Flags, 9 bits TODO: Handle the NS bit </summary> </member> <member name="P:PacketDotNet.TcpPacket.Urg"> <summary> Check the URG flag, flag indicates if the urgent pointer is valid.</summary> </member> <member name="P:PacketDotNet.TcpPacket.Ack"> <summary> Check the ACK flag, flag indicates if the ack number is valid.</summary> </member> <member name="P:PacketDotNet.TcpPacket.Psh"> <summary> Check the PSH flag, flag indicates the receiver should pass the data to the application as soon as possible. </summary> </member> <member name="P:PacketDotNet.TcpPacket.Rst"> <summary> Check the RST flag, flag indicates the session should be reset between the sender and the receiver. </summary> </member> <member name="P:PacketDotNet.TcpPacket.Syn"> <summary> Check the SYN flag, flag indicates the sequence numbers should be synchronized between the sender and receiver to initiate a connection. </summary> </member> <member name="P:PacketDotNet.TcpPacket.Fin"> <summary> Check the FIN flag, flag indicates the sender is finished sending.</summary> </member> <member name="P:PacketDotNet.TcpPacket.ECN"> <value> ECN flag </value> </member> <member name="P:PacketDotNet.TcpPacket.CWR"> <value> CWR flag </value> </member> <member name="P:PacketDotNet.TcpPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="P:PacketDotNet.TcpPacket.UrgentPointer"> <summary> Fetch the urgent pointer.</summary> </member> <member name="P:PacketDotNet.TcpPacket.Options"> <summary> Bytes that represent the tcp options </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="P:PacketDotNet.TcpPacket.OptionsCollection"> <summary> Contains the Options list attached to the TCP header </summary> </member> <member name="M:PacketDotNet.TcpPacket.CalculateTCPChecksum"> <summary> Computes the TCP checksum. Does not update the current checksum value </summary> <returns> The calculated TCP checksum.</returns> </member> <member name="M:PacketDotNet.TcpPacket.UpdateTCPChecksum"> <summary> Update the checksum value. </summary> </member> <!--FIXME: Invalid documentation markup was found for member M:PacketDotNet.TcpPacket.ParseOptions(System.Byte[])--> <member name="M:PacketDotNet.TcpPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.TcpPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the TcpPacket embedded in Packet p or null if there is no embedded TcpPacket </summary> </member> <member name="M:PacketDotNet.TcpPacket.RandomPacket"> <summary> Create a randomized tcp packet with the given ip version </summary> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="T:PacketDotNet.UdpPacket"> <summary> User datagram protocol See http://en.wikipedia.org/wiki/Udp </summary> </member> <member name="M:PacketDotNet.UdpPacket.#ctor(System.UInt16,System.UInt16)"> <summary> Create from values </summary> <param name="SourcePort"> A <see cref="T:System.UInt16" /></param> <param name="DestinationPort"> A <see cref="T:System.UInt16" /></param> </member> <member name="M:PacketDotNet.UdpPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.UdpPacket.#ctor(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Packet)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> </member> <member name="P:PacketDotNet.UdpPacket.SourcePort"> <summary> Fetch the port number on the source host.</summary> </member> <member name="P:PacketDotNet.UdpPacket.DestinationPort"> <summary> Fetch the port number on the target host.</summary> </member> <member name="P:PacketDotNet.UdpPacket.Length"> <value> Length in bytes of the header and payload, minimum size of 8, the size of the Udp header </value> </member> <member name="P:PacketDotNet.UdpPacket.Checksum"> <summary> Fetch the header checksum.</summary> </member> <member name="P:PacketDotNet.UdpPacket.ValidChecksum"> <summary> Check if the UDP packet is valid, checksum-wise.</summary> </member> <member name="P:PacketDotNet.UdpPacket.ValidUDPChecksum"> <value> True if the udp checksum is valid </value> </member> <member name="P:PacketDotNet.UdpPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.UdpPacket.UpdateCalculatedValues"> <summary> Update the Udp length </summary> </member> <member name="M:PacketDotNet.UdpPacket.CalculateUDPChecksum"> <summary> Calculates the UDP checksum, optionally updating the UDP checksum header. </summary> <returns>The calculated UDP checksum.</returns> </member> <member name="M:PacketDotNet.UdpPacket.UpdateUDPChecksum"> <summary> Update the checksum value. </summary> </member> <member name="M:PacketDotNet.UdpPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.UdpPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the UdpPacket inside of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.UdpPacket" /></returns> </member> <member name="M:PacketDotNet.UdpPacket.RandomPacket"> <summary> Generate a random packet </summary> <returns> A <see cref="T:PacketDotNet.UdpPacket" /></returns> </member> <member name="T:PacketDotNet.EthernetFields"> <summary> Ethernet protocol field encoding information. </summary> </member> <member name="F:PacketDotNet.EthernetFields.TypeLength"> <summary> Width of the ethernet type code in bytes.</summary> </member> <member name="F:PacketDotNet.EthernetFields.DestinationMacPosition"> <summary> Position of the destination MAC address within the ethernet header.</summary> </member> <member name="F:PacketDotNet.EthernetFields.SourceMacPosition"> <summary> Position of the source MAC address within the ethernet header.</summary> </member> <member name="F:PacketDotNet.EthernetFields.TypePosition"> <summary> Position of the ethernet type field within the ethernet header.</summary> </member> <member name="F:PacketDotNet.EthernetFields.HeaderLength"> <summary> Total length of an ethernet header in bytes.</summary> </member> <member name="F:PacketDotNet.EthernetFields.MacAddressLength"> <summary> size of an ethernet mac address in bytes </summary> </member> <member name="T:PacketDotNet.TransportPacket"> <summary> Transport layer packet </summary> </member> <member name="M:PacketDotNet.TransportPacket.#ctor"> <summary> Constructor </summary> </member> <member name="T:PacketDotNet.TransportPacket.TransportChecksumOption"> <summary> Options for use when creating a transport layer checksum </summary> </member> <member name="F:PacketDotNet.TransportPacket.TransportChecksumOption.None"> <summary> No extra options </summary> </member> <member name="F:PacketDotNet.TransportPacket.TransportChecksumOption.AttachPseudoIPHeader"> <summary> Attach a pseudo IP header to the transport data being checksummed </summary> </member> <member name="P:PacketDotNet.TransportPacket.Checksum"> <value> The Checksum version </value> </member> <member name="M:PacketDotNet.TransportPacket.CalculateChecksum(PacketDotNet.TransportPacket.TransportChecksumOption)"> <summary> Calculates the transport layer checksum, either for the tcp or udp packet </summary> <param name="option"> <see cref="T:PacketDotNet.TransportPacket.TransportChecksumOption" /> </param> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="M:PacketDotNet.TransportPacket.IsValidChecksum(PacketDotNet.TransportPacket.TransportChecksumOption)"> <summary> Determine if the transport layer checksum is valid </summary> <param name="option"> A <see cref="T:PacketDotNet.TransportPacket.TransportChecksumOption" /></param> <returns> A <see cref="T:System.Boolean" /></returns> </member> <member name="T:PacketDotNet.Utils.AnsiEscapeSequences"> <summary> String constants for color console output. <p> This file contains control sequences to print color text on a text console capable of interpreting and displaying control sequences. </p><p> A capable console would be unix bash, os/2 shell, or command.com w/ ansi.sys loaded </p></summary> <author> Chris Cheetham </author> </member> <member name="F:PacketDotNet.Utils.AnsiEscapeSequences.EscapeBegin"> <summary> Delimits the start of an ansi color sequence, the color code goes after this </summary> </member> <member name="F:PacketDotNet.Utils.AnsiEscapeSequences.EscapeEnd"> <summary> Delimits the stop of the ansi color sequence, the color code comes before this </summary> </member> <member name="T:PacketDotNet.UdpFields"> <summary> Defines the lengths and positions of the udp fields within a udp packet </summary> </member> <member name="F:PacketDotNet.UdpFields.PortLength"> <summary> Length of a UDP port in bytes.</summary> </member> <member name="F:PacketDotNet.UdpFields.HeaderLengthLength"> <summary> Length of the header length field in bytes.</summary> </member> <member name="F:PacketDotNet.UdpFields.ChecksumLength"> <summary> Length of the checksum field in bytes.</summary> </member> <member name="F:PacketDotNet.UdpFields.SourcePortPosition"> <summary> Position of the source port.</summary> </member> <member name="F:PacketDotNet.UdpFields.DestinationPortPosition"> <summary> Position of the destination port.</summary> </member> <member name="F:PacketDotNet.UdpFields.HeaderLengthPosition"> <summary> Position of the header length.</summary> </member> <member name="F:PacketDotNet.UdpFields.ChecksumPosition"> <summary> Position of the header checksum length.</summary> </member> <member name="F:PacketDotNet.UdpFields.HeaderLength"> <summary> Length of a UDP header in bytes.</summary> </member> <member name="T:MiscUtil.IO.EndianBinaryReader"> <summary> Equivalent of System.IO.BinaryReader, but with either endianness, depending on the EndianBitConverter it is constructed with. No data is buffered in the reader; the client may seek within the stream at will. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.#ctor(MiscUtil.Conversion.EndianBitConverter,System.IO.Stream)"> <summary> Equivalent of System.IO.BinaryWriter, but with either endianness, depending on the EndianBitConverter it is constructed with. </summary> <param name="bitConverter">Converter to use when reading data</param> <param name="stream">Stream to read data from</param> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.#ctor(MiscUtil.Conversion.EndianBitConverter,System.IO.Stream,System.Text.Encoding)"> <summary> Constructs a new binary reader with the given bit converter, reading to the given stream, using the given encoding. </summary> <param name="bitConverter">Converter to use when reading data</param> <param name="stream">Stream to read data from</param> <param name="encoding">Encoding to use when reading character data</param> </member> <member name="F:MiscUtil.IO.EndianBinaryReader.disposed"> <summary> Whether or not this reader has been disposed yet. </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryReader.decoder"> <summary> Decoder to use for string conversions. </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryReader.buffer"> <summary> Buffer used for temporary storage before conversion into primitives </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryReader.charBuffer"> <summary> Buffer used for temporary storage when reading a single character </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryReader.minBytesPerChar"> <summary> Minimum number of bytes used to encode a character </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryReader.BitConverter"> <summary> The bit converter used to read values from the stream </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryReader.Encoding"> <summary> The encoding used to read strings </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryReader.BaseStream"> <summary> Gets the underlying stream of the EndianBinaryReader. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Close"> <summary> Closes the reader, including the underlying stream.. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Seek(System.Int32,System.IO.SeekOrigin)"> <summary> Seeks within the stream. </summary> <param name="offset">Offset to seek to.</param> <param name="origin">Origin of seek operation.</param> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadByte"> <summary> Reads a single byte from the stream. </summary> <returns>The byte read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadSByte"> <summary> Reads a single signed byte from the stream. </summary> <returns>The byte read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadBoolean"> <summary> Reads a boolean from the stream. 1 byte is read. </summary> <returns>The boolean read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadInt16"> <summary> Reads a 16-bit signed integer from the stream, using the bit converter for this reader. 2 bytes are read. </summary> <returns>The 16-bit integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadInt32"> <summary> Reads a 32-bit signed integer from the stream, using the bit converter for this reader. 4 bytes are read. </summary> <returns>The 32-bit integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadInt64"> <summary> Reads a 64-bit signed integer from the stream, using the bit converter for this reader. 8 bytes are read. </summary> <returns>The 64-bit integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadUInt16"> <summary> Reads a 16-bit unsigned integer from the stream, using the bit converter for this reader. 2 bytes are read. </summary> <returns>The 16-bit unsigned integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadUInt32"> <summary> Reads a 32-bit unsigned integer from the stream, using the bit converter for this reader. 4 bytes are read. </summary> <returns>The 32-bit unsigned integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadUInt64"> <summary> Reads a 64-bit unsigned integer from the stream, using the bit converter for this reader. 8 bytes are read. </summary> <returns>The 64-bit unsigned integer read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadSingle"> <summary> Reads a single-precision floating-point value from the stream, using the bit converter for this reader. 4 bytes are read. </summary> <returns>The floating point value read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadDouble"> <summary> Reads a double-precision floating-point value from the stream, using the bit converter for this reader. 8 bytes are read. </summary> <returns>The floating point value read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadDecimal"> <summary> Reads a decimal value from the stream, using the bit converter for this reader. 16 bytes are read. </summary> <returns>The decimal value read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Read"> <summary> Reads a single character from the stream, using the character encoding for this reader. If no characters have been fully read by the time the stream ends, -1 is returned. </summary> <returns>The character read, or -1 for end of stream.</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Read(System.Char[],System.Int32,System.Int32)"> <summary> Reads the specified number of characters into the given buffer, starting at the given index. </summary> <param name="data">The buffer to copy data into</param> <param name="index">The first index to copy data into</param> <param name="count">The number of characters to read</param> <returns>The number of characters actually read. This will only be less than the requested number of characters if the end of the stream is reached. </returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Read(System.Byte[],System.Int32,System.Int32)"> <summary> Reads the specified number of bytes into the given buffer, starting at the given index. </summary> <param name="buffer">The buffer to copy data into</param> <param name="index">The first index to copy data into</param> <param name="count">The number of bytes to read</param> <returns>The number of bytes actually read. This will only be less than the requested number of bytes if the end of the stream is reached. </returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadBytes(System.Int32)"> <summary> Reads the specified number of bytes, returning them in a new byte array. If not enough bytes are available before the end of the stream, this method will return what is available. </summary> <param name="count">The number of bytes to read</param> <returns>The bytes read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadBytesOrThrow(System.Int32)"> <summary> Reads the specified number of bytes, returning them in a new byte array. If not enough bytes are available before the end of the stream, this method will throw an IOException. </summary> <param name="count">The number of bytes to read</param> <returns>The bytes read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Read7BitEncodedInt"> <summary> Reads a 7-bit encoded integer from the stream. This is stored with the least significant information first, with 7 bits of information per byte of value, and the top bit as a continuation flag. This method is not affected by the endianness of the bit converter. </summary> <returns>The 7-bit encoded integer read from the stream.</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadBigEndian7BitEncodedInt"> <summary> Reads a 7-bit encoded integer from the stream. This is stored with the most significant information first, with 7 bits of information per byte of value, and the top bit as a continuation flag. This method is not affected by the endianness of the bit converter. </summary> <returns>The 7-bit encoded integer read from the stream.</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadString"> <summary> Reads a length-prefixed string from the stream, using the encoding for this reader. A 7-bit encoded integer is first read, which specifies the number of bytes to read from the stream. These bytes are then converted into a string with the encoding for this reader. </summary> <returns>The string read from the stream.</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.CheckDisposed"> <summary> Checks whether or not the reader has been disposed, throwing an exception if so. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.ReadInternal(System.Byte[],System.Int32)"> <summary> Reads the given number of bytes from the stream, throwing an exception if they can't all be read. </summary> <param name="data">Buffer to read into</param> <param name="size">Number of bytes to read</param> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.TryReadInternal(System.Byte[],System.Int32)"> <summary> Reads the given number of bytes from the stream if possible, returning the number of bytes actually read, which may be less than requested if (and only if) the end of the stream is reached. </summary> <param name="data">Buffer to read into</param> <param name="size">Number of bytes to read</param> <returns>Number of bytes actually read</returns> </member> <member name="M:MiscUtil.IO.EndianBinaryReader.Dispose"> <summary> Disposes of the underlying stream. </summary> </member> <member name="T:MiscUtil.IO.EndianBinaryWriter"> <summary> Equivalent of System.IO.BinaryWriter, but with either endianness, depending on the EndianBitConverter it is constructed with. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.#ctor(MiscUtil.Conversion.EndianBitConverter,System.IO.Stream)"> <summary> Constructs a new binary writer with the given bit converter, writing to the given stream, using UTF-8 encoding. </summary> <param name="bitConverter">Converter to use when writing data</param> <param name="stream">Stream to write data to</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.#ctor(MiscUtil.Conversion.EndianBitConverter,System.IO.Stream,System.Text.Encoding)"> <summary> Constructs a new binary writer with the given bit converter, writing to the given stream, using the given encoding. </summary> <param name="bitConverter">Converter to use when writing data</param> <param name="stream">Stream to write data to</param> <param name="encoding">Encoding to use when writing character data</param> </member> <member name="F:MiscUtil.IO.EndianBinaryWriter.disposed"> <summary> Whether or not this writer has been disposed yet. </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryWriter.buffer"> <summary> Buffer used for temporary storage during conversion from primitives </summary> </member> <member name="F:MiscUtil.IO.EndianBinaryWriter.charBuffer"> <summary> Buffer used for Write(char) </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryWriter.BitConverter"> <summary> The bit converter used to write values to the stream </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryWriter.Encoding"> <summary> The encoding used to write strings </summary> </member> <member name="P:MiscUtil.IO.EndianBinaryWriter.BaseStream"> <summary> Gets the underlying stream of the EndianBinaryWriter. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Close"> <summary> Closes the writer, including the underlying stream. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Flush"> <summary> Flushes the underlying stream. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Seek(System.Int32,System.IO.SeekOrigin)"> <summary> Seeks within the stream. </summary> <param name="offset">Offset to seek to.</param> <param name="origin">Origin of seek operation.</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Boolean)"> <summary> Writes a boolean value to the stream. 1 byte is written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Int16)"> <summary> Writes a 16-bit signed integer to the stream, using the bit converter for this writer. 2 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Int32)"> <summary> Writes a 32-bit signed integer to the stream, using the bit converter for this writer. 4 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Int64)"> <summary> Writes a 64-bit signed integer to the stream, using the bit converter for this writer. 8 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.UInt16)"> <summary> Writes a 16-bit unsigned integer to the stream, using the bit converter for this writer. 2 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.UInt32)"> <summary> Writes a 32-bit unsigned integer to the stream, using the bit converter for this writer. 4 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.UInt64)"> <summary> Writes a 64-bit unsigned integer to the stream, using the bit converter for this writer. 8 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Single)"> <summary> Writes a single-precision floating-point value to the stream, using the bit converter for this writer. 4 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Double)"> <summary> Writes a double-precision floating-point value to the stream, using the bit converter for this writer. 8 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Decimal)"> <summary> Writes a decimal value to the stream, using the bit converter for this writer. 16 bytes are written. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Byte)"> <summary> Writes a signed byte to the stream. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.SByte)"> <summary> Writes an unsigned byte to the stream. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Byte[])"> <summary> Writes an array of bytes to the stream. </summary> <param name="value">The values to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Byte[],System.Int32,System.Int32)"> <summary> Writes a portion of an array of bytes to the stream. </summary> <param name="value">An array containing the bytes to write</param> <param name="offset">The index of the first byte to write within the array</param> <param name="count">The number of bytes to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Char)"> <summary> Writes a single character to the stream, using the encoding for this writer. </summary> <param name="value">The value to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.Char[])"> <summary> Writes an array of characters to the stream, using the encoding for this writer. </summary> <param name="value">An array containing the characters to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write(System.String)"> <summary> Writes a string to the stream, using the encoding for this writer. </summary> <param name="value">The value to write. Must not be null.</param> <exception cref="T:System.ArgumentNullException">value is null</exception> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Write7BitEncodedInt(System.Int32)"> <summary> Writes a 7-bit encoded integer from the stream. This is stored with the least significant information first, with 7 bits of information per byte of value, and the top bit as a continuation flag. </summary> <param name="value">The 7-bit encoded integer to write to the stream</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.CheckDisposed"> <summary> Checks whether or not the writer has been disposed, throwing an exception if so. </summary> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.WriteInternal(System.Byte[],System.Int32)"> <summary> Writes the specified number of bytes from the start of the given byte array, after checking whether or not the writer has been disposed. </summary> <param name="bytes">The array of bytes to write from</param> <param name="length">The number of bytes to write</param> </member> <member name="M:MiscUtil.IO.EndianBinaryWriter.Dispose"> <summary> Disposes of the underlying stream. </summary> </member> <member name="T:MiscUtil.Conversion.BigEndianBitConverter"> <summary> Implementation of EndianBitConverter which converts to/from big-endian byte arrays. </summary> </member> <member name="P:MiscUtil.Conversion.BigEndianBitConverter.Endianness"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> </member> <member name="M:MiscUtil.Conversion.BigEndianBitConverter.IsLittleEndian"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> <remarks> Different computer architectures store data using different byte orders. "Big-endian" means the most significant byte is on the left end of a word. "Little-endian" means the most significant byte is on the right end of a word. </remarks> <returns>true if this converter is little-endian, false otherwise.</returns> </member> <member name="M:MiscUtil.Conversion.BigEndianBitConverter.CopyBytesImpl(System.Int64,System.Int32,System.Byte[],System.Int32)"> <summary> Copies the specified number of bytes from value to buffer, starting at index. </summary> <param name="value">The value to copy</param> <param name="bytes">The number of bytes to copy</param> <param name="buffer">The buffer to copy the bytes into</param> <param name="index">The index to start at</param> </member> <member name="M:MiscUtil.Conversion.BigEndianBitConverter.FromBytes(System.Byte[],System.Int32,System.Int32)"> <summary> Returns a value built from the specified number of bytes from the given buffer, starting at index. </summary> <param name="buffer">The data in byte array format</param> <param name="startIndex">The first index to use</param> <param name="bytesToConvert">The number of bytes to use</param> <returns>The value built from the given bytes</returns> </member> <member name="T:MiscUtil.Conversion.DoubleConverter"> <summary> A class to allow the conversion of doubles to string representations of their exact decimal values. The implementation aims for readability over efficiency. </summary> </member> <member name="T:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal"> <summary> Private class used for manipulating sequences of decimal digits. </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.#ctor(System.Int64)"> <summary> Constructs an arbitrary decimal expansion from the given long. The long must not be negative. </summary> </member> <member name="F:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.digits"> <summary>Digits in the decimal expansion, one byte per digit</summary> </member> <member name="F:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.decimalPoint"> <summary> How many digits are *after* the decimal point </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.MultiplyBy(System.Int32)"> <summary> Multiplies the current expansion by the given amount, which should only be 2 or 5. </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.Shift(System.Int32)"> <summary> Shifts the decimal point; a negative value makes the decimal expansion bigger (as fewer digits come after the decimal place) and a positive value makes the decimal expansion smaller. </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.Normalize"> <summary> Removes leading/trailing zeroes from the expansion. </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ArbitraryDecimal.ToString"> <summary> Converts the value to a proper decimal string representation. </summary> </member> <member name="M:MiscUtil.Conversion.DoubleConverter.ToExactString(System.Double)"> <summary> Converts the given double to a string representation of its exact decimal value. </summary> <param name="d">The double to convert.</param> <returns>A string representation of the double's exact decimal value.</returns> </member> <member name="T:MiscUtil.Conversion.EndianBitConverter"> <summary> Equivalent of System.BitConverter, but with either endianness. </summary> </member> <member name="T:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion"> <summary> Union used solely for the equivalent of DoubleToInt64Bits and vice versa. </summary> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.#ctor(System.Int32)"> <summary> Creates an instance representing the given integer. </summary> <param name="i">The integer value of the new instance.</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.#ctor(System.Single)"> <summary> Creates an instance representing the given floating point number. </summary> <param name="f">The floating point value of the new instance.</param> </member> <member name="F:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.i"> <summary> Int32 version of the value. </summary> </member> <member name="F:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.f"> <summary> Single version of the value. </summary> </member> <member name="P:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.AsInt32"> <summary> Returns the value of the instance as an integer. </summary> </member> <member name="P:MiscUtil.Conversion.EndianBitConverter.Int32SingleUnion.AsSingle"> <summary> Returns the value of the instance as a floating point number. </summary> </member> <member name="P:MiscUtil.Conversion.EndianBitConverter.Endianness"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> </member> <member name="P:MiscUtil.Conversion.EndianBitConverter.Little"> <summary> Returns a little-endian bit converter instance. The same instance is always returned. </summary> </member> <member name="P:MiscUtil.Conversion.EndianBitConverter.Big"> <summary> Returns a big-endian bit converter instance. The same instance is always returned. </summary> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.IsLittleEndian"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> <remarks> Different computer architectures store data using different byte orders. "Big-endian" means the most significant byte is on the left end of a word. "Little-endian" means the most significant byte is on the right end of a word. </remarks> <returns>true if this converter is little-endian, false otherwise.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.DoubleToInt64Bits(System.Double)"> <summary> Converts the specified double-precision floating point number to a 64-bit signed integer. Note: the endianness of this converter does not affect the returned value. </summary> <param name="value">The number to convert. </param> <returns>A 64-bit signed integer whose value is equivalent to value.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.Int64BitsToDouble(System.Int64)"> <summary> Converts the specified 64-bit signed integer to a double-precision floating point number. Note: the endianness of this converter does not affect the returned value. </summary> <param name="value">The number to convert. </param> <returns>A double-precision floating point number whose value is equivalent to value.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.SingleToInt32Bits(System.Single)"> <summary> Converts the specified single-precision floating point number to a 32-bit signed integer. Note: the endianness of this converter does not affect the returned value. </summary> <param name="value">The number to convert. </param> <returns>A 32-bit signed integer whose value is equivalent to value.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.Int32BitsToSingle(System.Int32)"> <summary> Converts the specified 32-bit signed integer to a single-precision floating point number. Note: the endianness of this converter does not affect the returned value. </summary> <param name="value">The number to convert. </param> <returns>A single-precision floating point number whose value is equivalent to value.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToBoolean(System.Byte[],System.Int32)"> <summary> Returns a Boolean value converted from one byte at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>true if the byte at startIndex in value is nonzero; otherwise, false.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToChar(System.Byte[],System.Int32)"> <summary> Returns a Unicode character converted from two bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A character formed by two bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToDouble(System.Byte[],System.Int32)"> <summary> Returns a double-precision floating point number converted from eight bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A double precision floating point number formed by eight bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToSingle(System.Byte[],System.Int32)"> <summary> Returns a single-precision floating point number converted from four bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A single precision floating point number formed by four bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToInt16(System.Byte[],System.Int32)"> <summary> Returns a 16-bit signed integer converted from two bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 16-bit signed integer formed by two bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToInt32(System.Byte[],System.Int32)"> <summary> Returns a 32-bit signed integer converted from four bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 32-bit signed integer formed by four bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToInt64(System.Byte[],System.Int32)"> <summary> Returns a 64-bit signed integer converted from eight bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 64-bit signed integer formed by eight bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToUInt16(System.Byte[],System.Int32)"> <summary> Returns a 16-bit unsigned integer converted from two bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 16-bit unsigned integer formed by two bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToUInt32(System.Byte[],System.Int32)"> <summary> Returns a 32-bit unsigned integer converted from four bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 32-bit unsigned integer formed by four bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToUInt64(System.Byte[],System.Int32)"> <summary> Returns a 64-bit unsigned integer converted from eight bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A 64-bit unsigned integer formed by eight bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CheckByteArgument(System.Byte[],System.Int32,System.Int32)"> <summary> Checks the given argument for validity. </summary> <param name="value">The byte array passed in</param> <param name="startIndex">The start index passed in</param> <param name="bytesRequired">The number of bytes required</param> <exception cref="T:System.ArgumentNullException">value is a null reference</exception> <exception cref="T:System.ArgumentOutOfRangeException"> startIndex is less than zero or greater than the length of value minus bytesRequired. </exception> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CheckedFromBytes(System.Byte[],System.Int32,System.Int32)"> <summary> Checks the arguments for validity before calling FromBytes (which can therefore assume the arguments are valid). </summary> <param name="value">The bytes to convert after checking</param> <param name="startIndex">The index of the first byte to convert</param> <param name="bytesToConvert">The number of bytes to convert</param> <returns> </returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.FromBytes(System.Byte[],System.Int32,System.Int32)"> <summary> Convert the given number of bytes from the given array, from the given start position, into a long, using the bytes as the least significant part of the long. By the time this is called, the arguments have been checked for validity. </summary> <param name="value">The bytes to convert</param> <param name="startIndex">The index of the first byte to convert</param> <param name="bytesToConvert">The number of bytes to use in the conversion</param> <returns>The converted number</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToString(System.Byte[])"> <summary> Returns a String converted from the elements of a byte array. </summary> <param name="value">An array of bytes.</param> <remarks>All the elements of value are converted.</remarks> <returns> A String of hexadecimal pairs separated by hyphens, where each pair represents the corresponding element in value; for example, "7F-2C-4A". </returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToString(System.Byte[],System.Int32)"> <summary> Returns a String converted from the elements of a byte array starting at a specified array position. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <remarks>The elements from array position startIndex to the end of the array are converted.</remarks> <returns> A String of hexadecimal pairs separated by hyphens, where each pair represents the corresponding element in value; for example, "7F-2C-4A". </returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToString(System.Byte[],System.Int32,System.Int32)"> <summary> Returns a String converted from a specified number of bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <param name="length">The number of bytes to convert.</param> <remarks>The length elements from array position startIndex are converted.</remarks> <returns> A String of hexadecimal pairs separated by hyphens, where each pair represents the corresponding element in value; for example, "7F-2C-4A". </returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.ToDecimal(System.Byte[],System.Int32)"> <summary> Returns a decimal value converted from sixteen bytes at a specified position in a byte array. </summary> <param name="value">An array of bytes.</param> <param name="startIndex">The starting position within value.</param> <returns>A decimal formed by sixteen bytes beginning at startIndex.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Decimal)"> <summary> Returns the specified decimal value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 16.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Decimal,System.Byte[],System.Int32)"> <summary> Copies the specified decimal value into the specified byte array, beginning at the specified index. </summary> <param name="value">A character to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Int64,System.Int32)"> <summary> Returns an array with the given number of bytes formed from the least significant bytes of the specified value. This is used to implement the other GetBytes methods. </summary> <param name="value">The value to get bytes for</param> <param name="bytes">The number of significant bytes to return</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Boolean)"> <summary> Returns the specified Boolean value as an array of bytes. </summary> <param name="value">A Boolean value.</param> <returns>An array of bytes with length 1.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Char)"> <summary> Returns the specified Unicode character value as an array of bytes. </summary> <param name="value">A character to convert.</param> <returns>An array of bytes with length 2.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Double)"> <summary> Returns the specified double-precision floating point value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 8.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Int16)"> <summary> Returns the specified 16-bit signed integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 2.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Int32)"> <summary> Returns the specified 32-bit signed integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 4.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Int64)"> <summary> Returns the specified 64-bit signed integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 8.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.Single)"> <summary> Returns the specified single-precision floating point value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 4.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.UInt16)"> <summary> Returns the specified 16-bit unsigned integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 2.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.UInt32)"> <summary> Returns the specified 32-bit unsigned integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 4.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.GetBytes(System.UInt64)"> <summary> Returns the specified 64-bit unsigned integer value as an array of bytes. </summary> <param name="value">The number to convert.</param> <returns>An array of bytes with length 8.</returns> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Int64,System.Int32,System.Byte[],System.Int32)"> <summary> Copies the given number of bytes from the least-specific end of the specified value into the specified byte array, beginning at the specified index. This is used to implement the other CopyBytes methods. </summary> <param name="value">The value to copy bytes for</param> <param name="bytes">The number of significant bytes to copy</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytesImpl(System.Int64,System.Int32,System.Byte[],System.Int32)"> <summary> Copies the given number of bytes from the least-specific end of the specified value into the specified byte array, beginning at the specified index. This must be implemented in concrete derived classes, but the implementation may assume that the value will fit into the buffer. </summary> <param name="value">The value to copy bytes for</param> <param name="bytes">The number of significant bytes to copy</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Boolean,System.Byte[],System.Int32)"> <summary> Copies the specified Boolean value into the specified byte array, beginning at the specified index. </summary> <param name="value">A Boolean value.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Char,System.Byte[],System.Int32)"> <summary> Copies the specified Unicode character value into the specified byte array, beginning at the specified index. </summary> <param name="value">A character to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Double,System.Byte[],System.Int32)"> <summary> Copies the specified double-precision floating point value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Int16,System.Byte[],System.Int32)"> <summary> Copies the specified 16-bit signed integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Int32,System.Byte[],System.Int32)"> <summary> Copies the specified 32-bit signed integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Int64,System.Byte[],System.Int32)"> <summary> Copies the specified 64-bit signed integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.Single,System.Byte[],System.Int32)"> <summary> Copies the specified single-precision floating point value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.UInt16,System.Byte[],System.Int32)"> <summary> Copies the specified 16-bit unsigned integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.UInt32,System.Byte[],System.Int32)"> <summary> Copies the specified 32-bit unsigned integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="M:MiscUtil.Conversion.EndianBitConverter.CopyBytes(System.UInt64,System.Byte[],System.Int32)"> <summary> Copies the specified 64-bit unsigned integer value into the specified byte array, beginning at the specified index. </summary> <param name="value">The number to convert.</param> <param name="buffer">The byte array to copy the bytes into</param> <param name="index">The first index into the array to copy the bytes into</param> </member> <member name="T:MiscUtil.Conversion.Endianness"> <summary> Endianness of a converter </summary> </member> <member name="F:MiscUtil.Conversion.Endianness.LittleEndian"> <summary> Little endian - least significant byte first </summary> </member> <member name="F:MiscUtil.Conversion.Endianness.BigEndian"> <summary> Big endian - most significant byte first </summary> </member> <member name="T:MiscUtil.Conversion.LittleEndianBitConverter"> <summary> Implementation of EndianBitConverter which converts to/from little-endian byte arrays. </summary> </member> <member name="P:MiscUtil.Conversion.LittleEndianBitConverter.Endianness"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> </member> <member name="M:MiscUtil.Conversion.LittleEndianBitConverter.IsLittleEndian"> <summary> Indicates the byte order ("endianess") in which data is converted using this class. </summary> <remarks> Different computer architectures store data using different byte orders. "Big-endian" means the most significant byte is on the left end of a word. "Little-endian" means the most significant byte is on the right end of a word. </remarks> <returns>true if this converter is little-endian, false otherwise.</returns> </member> <member name="M:MiscUtil.Conversion.LittleEndianBitConverter.CopyBytesImpl(System.Int64,System.Int32,System.Byte[],System.Int32)"> <summary> Copies the specified number of bytes from value to buffer, starting at index. </summary> <param name="value">The value to copy</param> <param name="bytes">The number of bytes to copy</param> <param name="buffer">The buffer to copy the bytes into</param> <param name="index">The index to start at</param> </member> <member name="M:MiscUtil.Conversion.LittleEndianBitConverter.FromBytes(System.Byte[],System.Int32,System.Int32)"> <summary> Returns a value built from the specified number of bytes from the given buffer, starting at index. </summary> <param name="buffer">The data in byte array format</param> <param name="startIndex">The first index to use</param> <param name="bytesToConvert">The number of bytes to use</param> <returns>The value built from the given bytes</returns> </member> <member name="T:PacketDotNet.InternetPacket"> <summary> Internet packets include IPv4, IPv6, IGMP etc, see http://en.wikipedia.org/wiki/Internet_Layer </summary> </member> <member name="M:PacketDotNet.InternetPacket.#ctor"> <summary> Constructor </summary> </member> <member name="T:PacketDotNet.IPv4Fields"> <summary> IP protocol field encoding information. </summary> </member> <member name="F:PacketDotNet.IPv4Fields.VersionAndHeaderLengthLength"> <summary> Width of the IP version and header length field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.DifferentiatedServicesLength"> <summary> Width of the Differentiated Services / Type of service field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.TotalLengthLength"> <summary> Width of the total length field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.IdLength"> <summary> Width of the ID field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.FragmentOffsetAndFlagsLength"> <summary> Width of the fragment offset bits and offset field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.TtlLength"> <summary> Width of the TTL field in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.ProtocolLength"> <summary> Width of the IP protocol code in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.ChecksumLength"> <summary> Width of the IP checksum in bytes.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.VersionAndHeaderLengthPosition"> <summary> Position of the version code and header length within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.DifferentiatedServicesPosition"> <summary> Position of the differentiated services value within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.TotalLengthPosition"> <summary> Position of the header length within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.IdPosition"> <summary> Position of the packet ID within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.FragmentOffsetAndFlagsPosition"> <summary> Position of the flag bits and fragment offset within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.TtlPosition"> <summary> Position of the ttl within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.ProtocolPosition"> <summary> Position of the protocol used within the IP data </summary> </member> <member name="F:PacketDotNet.IPv4Fields.ChecksumPosition"> <summary> Position of the checksum within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.SourcePosition"> <summary> Position of the source IP address within the IP header.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.DestinationPosition"> <summary> Position of the destination IP address within a packet.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.HeaderLength"> <summary> Length in bytes of an IP header, excluding options.</summary> </member> <member name="F:PacketDotNet.IPv4Fields.AddressLength"> <summary> Number of bytes in an IPv4 address </summary> </member> <member name="T:PacketDotNet.IPv4Packet"> <summary> IPv4 packet See http://en.wikipedia.org/wiki/IPv4 for into </summary> </member> <member name="M:PacketDotNet.IPv4Packet.#ctor(System.Net.IPAddress,System.Net.IPAddress)"> <summary> Construct an instance by values </summary> </member> <member name="M:PacketDotNet.IPv4Packet.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="T:PacketDotNet.IPv4Packet.TypesOfService_Fields"> <summary> Type of service code constants for IP. Type of service describes how a packet should be handled. <p> TOS is an 8-bit record in an IP header which contains a 3-bit precendence field, 4 TOS bit fields and a 0 bit. </p><p> The following constants are bit masks which can be logically and'ed with the 8-bit IP TOS field to determine what type of service is set. </p><p> Taken from TCP/IP Illustrated V1 by Richard Stevens, p34. </p></summary> </member> <member name="F:PacketDotNet.IPv4Packet.HeaderMinimumLength"> <value> Number of bytes in the smallest valid ipv4 packet </value> </member> <member name="F:PacketDotNet.IPv4Packet.ipVersion"> <value> Version number of the IP protocol being used </value> </member> <member name="P:PacketDotNet.IPv4Packet.Version"> <summary> Get the IP version code.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.PayloadLength"> <value> Forwards compatibility IPv6.PayloadLength property </value> </member> <member name="P:PacketDotNet.IPv4Packet.HeaderLength"> <summary> The IP header length field. At most, this can be a four-bit value. The high order bits beyond the fourth bit will be ignored. </summary> <param name="length">The length of the IP header in 32-bit words. </param> </member> <member name="P:PacketDotNet.IPv4Packet.Id"> <summary> The unique ID of this IP datagram. The ID normally increments by one each time a datagram is sent by a host. A 16-bit unsigned integer. </summary> </member> <member name="P:PacketDotNet.IPv4Packet.FragmentOffset"> <summary> Fragmentation offset The offset specifies a number of octets (i.e., bytes). A 13-bit unsigned integer. </summary> </member> <member name="P:PacketDotNet.IPv4Packet.SourceAddress"> <summary> Fetch the IP address of the host where the packet originated from.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.DestinationAddress"> <summary> Fetch the IP address of the host where the packet is destined.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.Checksum"> <summary> Fetch the header checksum.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.ValidChecksum"> <summary> Check if the IP packet is valid, checksum-wise.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.ValidIPChecksum"> <summary> Check if the IP packet header is valid, checksum-wise. </summary> </member> <member name="P:PacketDotNet.IPv4Packet.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="P:PacketDotNet.IPv4Packet.DifferentiatedServices"> <summary> Fetch the type of service. </summary> </member> <member name="P:PacketDotNet.IPv4Packet.TypeOfService"> <value> Renamed to DifferentiatedServices in IPv6 but present here for backwards compatibility </value> </member> <member name="P:PacketDotNet.IPv4Packet.TotalLength"> <value> The entire datagram size including header and data </value> </member> <member name="P:PacketDotNet.IPv4Packet.FragmentFlags"> <summary> Fetch fragment flags.</summary> <param name="flags">A 3-bit unsigned integer.</param> </member> <member name="P:PacketDotNet.IPv4Packet.TimeToLive"> <summary> Fetch the time to live. TTL sets the upper limit on the number of routers through which this IP datagram is allowed to pass. Originally intended to be the number of seconds the packet lives it is now decremented by one each time a router passes the packet on 8-bit value </summary> </member> <member name="P:PacketDotNet.IPv4Packet.Protocol"> <summary> Fetch the code indicating the type of protocol embedded in the IP</summary> <seealso cref="T:PacketDotNet.IPProtocolType"> </seealso> </member> <member name="M:PacketDotNet.IPv4Packet.CalculateIPChecksum"> <summary> Calculates the IP checksum, optionally updating the IP checksum header. </summary> <returns> The calculated IP checksum. </returns> </member> <member name="M:PacketDotNet.IPv4Packet.UpdateIPChecksum"> <summary> Update the checksum value </summary> </member> <member name="M:PacketDotNet.IPv4Packet.AttachPseudoIPHeader(System.Byte[])"> <summary> Prepend to the given byte[] origHeader the portion of the IPv6 header used for generating an tcp checksum http://en.wikipedia.org/wiki/Transmission_Control_Protocol#TCP_checksum_using_IPv4 http://tools.ietf.org/html/rfc793 </summary> <param name="origHeader"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:System.Byte" /></returns> </member> <member name="M:PacketDotNet.IPv4Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.IPv4Packet.RandomPacket"> <summary> Generate a random packet </summary> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="M:PacketDotNet.IPv4Packet.UpdateCalculatedValues"> <summary> Update the length fields </summary> </member> <member name="T:PacketDotNet.IPv6Fields"> <summary> A struct containing length and position information about IPv6 Fields. </summary> </member> <member name="M:PacketDotNet.IPv6Fields.#ctor"> <summary> Commutes the field positions. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.VersionTrafficClassFlowLabelLength"> <summary> The IP Version, Traffic Class, and Flow Label field length. These must be in one field due to boundary crossings. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.PayloadLengthLength"> <summary> The payload length field length. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.NextHeaderLength"> <summary> The next header field length, identifies protocol encapsulated by the packet </summary> </member> <member name="F:PacketDotNet.IPv6Fields.HopLimitLength"> <summary> The hop limit field length. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.AddressLength"> <summary> Address field length </summary> </member> <member name="F:PacketDotNet.IPv6Fields.VersionTrafficClassFlowLabelPosition"> <summary> The byte position of the field line in the IPv6 header. This is where the IP version, Traffic Class, and Flow Label fields are. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.PayloadLengthPosition"> <summary> The byte position of the payload length field. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.NextHeaderPosition"> <summary> The byte position of the next header field. (Replaces the ipv4 protocol field) </summary> </member> <member name="F:PacketDotNet.IPv6Fields.HopLimitPosition"> <summary> The byte position of the hop limit field. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.SourceAddressPosition"> <summary> The byte position of the source address field. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.DestinationAddressPosition"> <summary> The byte position of the destination address field. </summary> </member> <member name="F:PacketDotNet.IPv6Fields.HeaderLength"> <summary> The byte length of the IPv6 Header </summary> </member> <member name="T:PacketDotNet.IPv6Packet"> <summary> IPv6 packet References ---------- http://tools.ietf.org/html/rfc2460 http://en.wikipedia.org/wiki/IPv6 </summary> </member> <member name="M:PacketDotNet.IPv6Packet.#ctor(System.Net.IPAddress,System.Net.IPAddress)"> <summary> Create an IPv6 packet from values </summary> <param name="SourceAddress"> A <see cref="T:System.Net.IPAddress" /></param> <param name="DestinationAddress"> A <see cref="T:System.Net.IPAddress" /></param> </member> <member name="M:PacketDotNet.IPv6Packet.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="F:PacketDotNet.IPv6Packet.HeaderMinimumLength"> <value> Minimum number of bytes in an IPv6 header </value> </member> <member name="F:PacketDotNet.IPv6Packet.ipVersion"> <value> The version of the IP protocol. The '6' in IPv6 indicates the version of the protocol </value> </member> <member name="P:PacketDotNet.IPv6Packet.Version"> <summary> The version field of the IPv6 Packet. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.TrafficClass"> <summary> The traffic class field of the IPv6 Packet. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.FlowLabel"> <summary> The flow label field of the IPv6 Packet. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.PayloadLength"> <summary> The payload lengeth field of the IPv6 Packet NOTE: Differs from the IPv4 'Total length' field that includes the length of the header as payload length is ONLY the size of the payload. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.HeaderLength"> <value> Backwards compatibility property for IPv4.HeaderLength NOTE: This field is the number of 32bit words </value> </member> <member name="P:PacketDotNet.IPv6Packet.TotalLength"> <value> Backwards compatibility property for IPv4.TotalLength </value> </member> <member name="P:PacketDotNet.IPv6Packet.NextHeader"> <summary> Identifies the protocol encapsulated by this packet Replaces IPv4's 'protocol' field, has compatible values </summary> </member> <member name="P:PacketDotNet.IPv6Packet.Protocol"> <value> The protocol of the packet encapsulated in this ip packet </value> </member> <member name="P:PacketDotNet.IPv6Packet.HopLimit"> <summary> The hop limit field of the IPv6 Packet. NOTE: Replaces the 'time to live' field of IPv4 8-bit value </summary> </member> <member name="P:PacketDotNet.IPv6Packet.TimeToLive"> <value> Helper alias for 'HopLimit' </value> </member> <member name="P:PacketDotNet.IPv6Packet.SourceAddress"> <summary> The source address field of the IPv6 Packet. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.DestinationAddress"> <summary> The destination address field of the IPv6 Packet. </summary> </member> <member name="P:PacketDotNet.IPv6Packet.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.IPv6Packet.AttachPseudoIPHeader(System.Byte[])"> <summary> Prepend to the given byte[] origHeader the portion of the IPv6 header used for generating an tcp checksum http://en.wikipedia.org/wiki/Transmission_Control_Protocol#TCP_checksum_using_IPv6 http://tools.ietf.org/html/rfc2460#page-27 </summary> <param name="origHeader"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:System.Byte" /></returns> </member> <member name="M:PacketDotNet.IPv6Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.IPv6Packet.RandomPacket"> <summary> Generate a random packet </summary> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="T:PacketDotNet.IpPort"> <summary> Code constants for ip ports. </summary> </member> <member name="F:PacketDotNet.IpPort.Ssh"> <summary> Secure shell </summary> </member> <member name="F:PacketDotNet.IpPort.Telnet"> <summary> Terminal protocol </summary> </member> <member name="F:PacketDotNet.IpPort.Smtp"> <summary> Simple mail transport protocol </summary> </member> <member name="F:PacketDotNet.IpPort.Http"> <summary> Hyper text transfer protocol </summary> </member> <member name="F:PacketDotNet.IpPort.Www"> <summary> Same as Http </summary> </member> <member name="F:PacketDotNet.IpPort.Sftp"> <summary> Secure ftp </summary> </member> <member name="F:PacketDotNet.IpPort.Ntp"> <summary> Network time protocol </summary> </member> <member name="F:PacketDotNet.IpPort.Snmp"> <summary> Simple network management protocol </summary> </member> <member name="T:PacketDotNet.Utils.ChecksumUtils"> <summary> Computes the one's sum on a byte array. Based TCP/IP Illustrated Vol. 2(1995) by Gary R. Wright and W. Richard Stevens. Page 236. And on http://www.cs.utk.edu/~cs594np/unp/checksum.html </summary> </member> <member name="M:PacketDotNet.Utils.ChecksumUtils.OnesComplementSum(System.Byte[])"> <summary> Computes the one's complement sum on a byte array </summary> </member> <member name="M:PacketDotNet.Utils.ChecksumUtils.OnesComplementSum(System.Byte[],System.Int32,System.Int32)"> <summary> Computes the one's complement sum on a byte array </summary> </member> <member name="M:PacketDotNet.Utils.ChecksumUtils.OnesSum(System.Byte[])"> <summary> Compute a ones sum of a byte array </summary> <param name="bytes"> A <see cref="T:System.Byte" /></param> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="M:PacketDotNet.Utils.ChecksumUtils.OnesSum(System.Byte[],System.Int32,System.Int32)"> <summary> 16 bit sum of all values http://en.wikipedia.org/wiki/Signed_number_representations#Ones.27_complement </summary> <param name="bytes"> A <see cref="T:System.Byte" /></param> <param name="start"> A <see cref="T:System.Int32" /></param> <param name="len"> A <see cref="T:System.Int32" /></param> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="T:PacketDotNet.TcpFields"> <summary> IP protocol field encoding information. </summary> </member> <member name="F:PacketDotNet.TcpFields.PortLength"> <summary> Length of a TCP port in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.SequenceNumberLength"> <summary> Length of the sequence number in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.AckNumberLength"> <summary> Length of the acknowledgment number in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.DataOffsetLength"> <summary> Length of the data offset and flags field in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.FlagsLength"> <summary> The length of the flags field </summary> </member> <member name="F:PacketDotNet.TcpFields.WindowSizeLength"> <summary> Length of the window size field in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.ChecksumLength"> <summary> Length of the checksum field in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.UrgentPointerLength"> <summary> Length of the urgent field in bytes.</summary> </member> <member name="F:PacketDotNet.TcpFields.SourcePortPosition"> <summary> Position of the source port field.</summary> </member> <member name="F:PacketDotNet.TcpFields.DestinationPortPosition"> <summary> Position of the destination port field.</summary> </member> <member name="F:PacketDotNet.TcpFields.SequenceNumberPosition"> <summary> Position of the sequence number field.</summary> </member> <member name="F:PacketDotNet.TcpFields.AckNumberPosition"> <summary> Position of the acknowledgment number field.</summary> </member> <member name="F:PacketDotNet.TcpFields.DataOffsetPosition"> <summary> Position of the data offset </summary> </member> <member name="F:PacketDotNet.TcpFields.FlagsPosition"> <summary> Position of the flags field </summary> </member> <member name="F:PacketDotNet.TcpFields.WindowSizePosition"> <summary> Position of the window size field.</summary> </member> <member name="F:PacketDotNet.TcpFields.ChecksumPosition"> <summary> Position of the checksum field.</summary> </member> <member name="F:PacketDotNet.TcpFields.UrgentPointerPosition"> <summary> Position of the urgent pointer field.</summary> </member> <member name="F:PacketDotNet.TcpFields.HeaderLength"> <summary> Length in bytes of a TCP header.</summary> </member> <member name="T:PacketDotNet.ARPFields"> <summary> IP protocol field encoding information. </summary> FIXME: These fields are partially broken because they assume the offset for several fields and the offset is actually based on the accumulated offset into the structure determined by the fields that indicate sizes</member> <member name="F:PacketDotNet.ARPFields.EthernetProtocolType"> <summary> Type code for ethernet addresses.</summary> </member> <member name="F:PacketDotNet.ARPFields.IPv4ProtocolType"> <summary> Type code for MAC addresses.</summary> </member> <member name="F:PacketDotNet.ARPFields.OperationLength"> <summary> Operation type length in bytes.</summary> </member> <member name="F:PacketDotNet.ARPFields.AddressTypeLength"> <summary> The length of the address type fields in bytes, eg. the length of hardware type or protocol type </summary> </member> <member name="F:PacketDotNet.ARPFields.AddressLengthLength"> <summary> The length of the address length fields in bytes. </summary> </member> <member name="F:PacketDotNet.ARPFields.HardwareAddressTypePosition"> <summary> Position of the hardware address type.</summary> </member> <member name="F:PacketDotNet.ARPFields.ProtocolAddressTypePosition"> <summary> Position of the protocol address type.</summary> </member> <member name="F:PacketDotNet.ARPFields.HardwareAddressLengthPosition"> <summary> Position of the hardware address length.</summary> </member> <member name="F:PacketDotNet.ARPFields.ProtocolAddressLengthPosition"> <summary> Position of the protocol address length.</summary> </member> <member name="F:PacketDotNet.ARPFields.OperationPosition"> <summary> Position of the operation type.</summary> </member> <member name="F:PacketDotNet.ARPFields.SenderHardwareAddressPosition"> <summary> Position of the sender hardware address.</summary> </member> <member name="F:PacketDotNet.ARPFields.SenderProtocolAddressPosition"> <summary> Position of the sender protocol address.</summary> </member> <member name="F:PacketDotNet.ARPFields.TargetHardwareAddressPosition"> <summary> Position of the target hardware address.</summary> </member> <member name="F:PacketDotNet.ARPFields.TargetProtocolAddressPosition"> <summary> Position of the target protocol address.</summary> </member> <member name="F:PacketDotNet.ARPFields.HeaderLength"> <summary> Total length in bytes of an ARP header.</summary> </member> <member name="T:PacketDotNet.ARPPacket"> <summary> An ARP protocol packet. </summary> </member> <member name="M:PacketDotNet.ARPPacket.#ctor(PacketDotNet.ARPOperation,System.Net.NetworkInformation.PhysicalAddress,System.Net.IPAddress,System.Net.NetworkInformation.PhysicalAddress,System.Net.IPAddress)"> <summary> Create an ARPPacket from values </summary> <param name="Operation"> A <see cref="T:PacketDotNet.ARPOperation" /></param> <param name="TargetHardwareAddress"> A <see cref="T:System.Net.NetworkInformation.PhysicalAddress" /></param> <param name="TargetProtocolAddress"> A <see cref="T:System.Net.IPAddress" /></param> <param name="SenderHardwareAddress"> A <see cref="T:System.Net.NetworkInformation.PhysicalAddress" /></param> <param name="SenderProtocolAddress"> A <see cref="T:System.Net.IPAddress" /></param> </member> <member name="M:PacketDotNet.ARPPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.ARPPacket.HardwareAddressType"> <value> Also known as HardwareType </value> </member> <member name="P:PacketDotNet.ARPPacket.ProtocolAddressType"> <value> Also known as ProtocolType </value> </member> <member name="P:PacketDotNet.ARPPacket.HardwareAddressLength"> <value> Hardware address length field </value> </member> <member name="P:PacketDotNet.ARPPacket.ProtocolAddressLength"> <value> Protocol address length field </value> </member> <member name="P:PacketDotNet.ARPPacket.Operation"> <summary> Fetch the operation code. Usually one of ARPFields.{ARP_OP_REQ_CODE, ARP_OP_REP_CODE}. </summary> <summary> Sets the operation code. Usually one of ARPFields.{ARP_OP_REQ_CODE, ARP_OP_REP_CODE}. </summary> </member> <member name="P:PacketDotNet.ARPPacket.SenderProtocolAddress"> <value> Upper layer protocol address of the sender, arp is used for IPv4, IPv6 uses NDP </value> </member> <member name="P:PacketDotNet.ARPPacket.TargetProtocolAddress"> <value> Upper layer protocol address of the target, arp is used for IPv4, IPv6 uses NDP </value> </member> <member name="P:PacketDotNet.ARPPacket.SenderHardwareAddress"> <value> Sender hardware address, usually an ethernet mac address </value> </member> <member name="P:PacketDotNet.ARPPacket.TargetHardwareAddress"> <value> Target hardware address, usually an ethernet mac address </value> </member> <member name="P:PacketDotNet.ARPPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.ARPPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.ARPPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the encapsulated ARPPacket of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.ARPPacket" /></returns> </member> <member name="T:PacketDotNet.ICMPv6Fields"> <summary> ICMP protocol field encoding information. See http://en.wikipedia.org/wiki/ICMPv6 </summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.TypeLength"> <summary> Length of the ICMP message type code in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.CodeLength"> <summary> Length of the ICMP subcode in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.ChecksumLength"> <summary> Length of the ICMP header checksum in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.TypePosition"> <summary> Position of the ICMP message type.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.CodePosition"> <summary> Position of the ICMP message subcode.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.ChecksumPosition"> <summary> Position of the ICMP header checksum.</summary> </member> <member name="F:PacketDotNet.ICMPv6Fields.HeaderLength"> <summary> Length in bytes of an ICMP header.</summary> </member> <member name="T:PacketDotNet.ICMPv6Packet"> <summary> An ICMP packet. See http://en.wikipedia.org/wiki/ICMPv6 </summary> </member> <member name="M:PacketDotNet.ICMPv6Packet.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.ICMPv6Packet.#ctor(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Packet)"> <summary> Constructor with parent packet </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> </member> <member name="F:PacketDotNet.ICMPv6Packet.skipUpdating"> <summary> Used to prevent a recursive stack overflow when recalculating in UpdateCalculatedValues() </summary> </member> <member name="P:PacketDotNet.ICMPv6Packet.Type"> <value> The Type value </value> </member> <member name="P:PacketDotNet.ICMPv6Packet.Code"> <summary> Fetch the ICMP code </summary> </member> <member name="P:PacketDotNet.ICMPv6Packet.Checksum"> <value> Checksum value </value> </member> <member name="P:PacketDotNet.ICMPv6Packet.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.ICMPv6Packet.UpdateCalculatedValues"> <summary> Recalculate the checksum </summary> </member> <member name="M:PacketDotNet.ICMPv6Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.ICMPv6Packet.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the ICMPv6Packet inside of Packet p or null if there is no encapsulated ICMPv6Packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.ICMPv6Packet" /></returns> </member> <member name="T:PacketDotNet.IGMPMessageType"> <summary> Code constants for IGMP message types. From RFC #2236. </summary> </member> <member name="T:PacketDotNet.IGMPv2Packet"> <summary> An IGMP packet. </summary> </member> <member name="M:PacketDotNet.IGMPv2Packet.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.IGMPv2Packet.#ctor(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Packet)"> <summary> Constructor with parent </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> </member> <member name="P:PacketDotNet.IGMPv2Packet.Type"> <value> The type of IGMP message </value> </member> <member name="P:PacketDotNet.IGMPv2Packet.MaxResponseTime"> <summary> Fetch the IGMP max response time.</summary> </member> <member name="P:PacketDotNet.IGMPv2Packet.Checksum"> <summary> Fetch the IGMP header checksum.</summary> </member> <member name="P:PacketDotNet.IGMPv2Packet.GroupAddress"> <summary> Fetch the IGMP group address.</summary> </member> <member name="P:PacketDotNet.IGMPv2Packet.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.IGMPv2Packet.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the encapsulated IGMPv2Packet of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.IGMPv2Packet" /></returns> </member> <member name="M:PacketDotNet.IGMPv2Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="T:PacketDotNet.InternetLinkLayerPacket"> <summary> Internet Link layer packet See http://en.wikipedia.org/wiki/Link_Layer </summary> </member> <member name="M:PacketDotNet.InternetLinkLayerPacket.#ctor"> <summary> Constructor </summary> </member> <member name="M:PacketDotNet.InternetLinkLayerPacket.GetInnerPayload(PacketDotNet.InternetLinkLayerPacket)"> <summary> Look for the innermost payload. This method is useful because while some packets are LinuxSSL-&gt;IpPacket or EthernetPacket-&gt;IpPacket, there are some packets that are EthernetPacket-&gt;PPPoEPacket-&gt;PPPPacket-&gt;IpPacket, and for these cases we really want to get to the IpPacket </summary> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="T:PacketDotNet.IGMPv2Fields"> <summary> IGMP protocol field encoding information. </summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.TypeLength"> <summary> Length of the IGMP message type code in bytes.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.MaxResponseTimeLength"> <summary> Length of the IGMP max response code in bytes.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.ChecksumLength"> <summary> Length of the IGMP header checksum in bytes.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.GroupAddressLength"> <summary> Length of group address in bytes.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.TypePosition"> <summary> Position of the IGMP message type.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.MaxResponseTimePosition"> <summary> Position of the IGMP max response code.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.ChecksumPosition"> <summary> Position of the IGMP header checksum.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.GroupAddressPosition"> <summary> Position of the IGMP group address.</summary> </member> <member name="F:PacketDotNet.IGMPv2Fields.HeaderLength"> <summary> Length in bytes of an IGMP header.</summary> </member> <member name="T:PacketDotNet.LinuxSLLPacket"> <summary> Represents a Linux cooked capture packet, the kinds of packets received when capturing on an 'any' device See http://github.com/mcr/libpcap/blob/master/pcap/sll.h </summary> </member> <member name="M:PacketDotNet.LinuxSLLPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.LinuxSLLPacket.Type"> <value> Information about the packet direction </value> </member> <member name="P:PacketDotNet.LinuxSLLPacket.LinkLayerAddressType"> <value> The </value> </member> <member name="P:PacketDotNet.LinuxSLLPacket.LinkLayerAddressLength"> <value> Number of bytes in the link layer address of the sender of the packet </value> </member> <member name="P:PacketDotNet.LinuxSLLPacket.LinkLayerAddress"> <value> Link layer header bytes, maximum of 8 bytes </value> </member> <member name="P:PacketDotNet.LinuxSLLPacket.EthernetProtocolType"> <value> The encapsulated protocol type </value> </member> <member name="M:PacketDotNet.LinuxSLLPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="T:PacketDotNet.LinuxSLLFields"> <summary> Lengths and offsets to the fields in the LinuxSLL packet See http://github.com/mcr/libpcap/blob/master/pcap/sll.h </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.PacketTypeLength"> <summary> Length of the packet type field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressTypeLength"> <summary> Link layer address type </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressLengthLength"> <summary> Link layer address length </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressMaximumLength"> <summary> The link layer address field length NOTE: the actual link layer address MAY be shorter than this </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.SLLHeaderLength"> <summary> Number of bytes in a SLL header </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.EthernetProtocolTypeLength"> <summary> Length of the ethernet protocol field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.PacketTypePosition"> <summary> Position of the packet type field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressTypePosition"> <summary> Position of the link layer address type field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressLengthPosition"> <summary> Positino of the link layer address length field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.LinkLayerAddressPosition"> <summary> Position of the link layer address field </summary> </member> <member name="F:PacketDotNet.LinuxSLLFields.EthernetProtocolTypePosition"> <summary> Position of the ethernet protocol type field </summary> </member> <member name="T:PacketDotNet.LinuxSLLType"> <summary> The types of cooked packets See http://github.com/mcr/libpcap/blob/master/pcap/sll.h </summary> </member> <member name="F:PacketDotNet.LinuxSLLType.PacketSentToUs"> <summary> Packet was sent to us by somebody else </summary> </member> <member name="F:PacketDotNet.LinuxSLLType.PacketBroadCast"> <summary> Packet was broadcast by somebody else </summary> </member> <member name="F:PacketDotNet.LinuxSLLType.PacketMulticast"> <summary> Packet was multicast, but not broadcast </summary> </member> <member name="F:PacketDotNet.LinuxSLLType.PacketSentToSomeoneElse"> <summary> Packet was sent by somebody else to somebody else </summary> </member> <member name="F:PacketDotNet.LinuxSLLType.PacketSentByUs"> <summary> Packet was sent by us </summary> </member> <member name="T:PacketDotNet.IPProtocolType"> <summary> The protocol encapsulated inside of the IP packet </summary> </member> <member name="F:PacketDotNet.IPProtocolType.IP"> <summary> Dummy protocol for TCP. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.HOPOPTS"> <summary> IPv6 Hop-by-Hop options. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.ICMP"> <summary> Internet Control Message Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.IGMP"> <summary> Internet Group Management Protocol.</summary> </member> <member name="F:PacketDotNet.IPProtocolType.IPIP"> <summary> IPIP tunnels (older KA9Q tunnels use 94). </summary> </member> <member name="F:PacketDotNet.IPProtocolType.TCP"> <summary> Transmission Control Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.EGP"> <summary> Exterior Gateway Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.PUP"> <summary> PUP protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.UDP"> <summary> User Datagram Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.IDP"> <summary> XNS IDP protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.TP"> <summary> SO Transport Protocol Class 4. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.IPV6"> <summary> IPv6 header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.ROUTING"> <summary> IPv6 routing header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.FRAGMENT"> <summary> IPv6 fragmentation header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.RSVP"> <summary> Reservation Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.GRE"> <summary> General Routing Encapsulation. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.ESP"> <summary> encapsulating security payload. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.AH"> <summary> authentication header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.ICMPV6"> <summary> ICMPv6. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.NONE"> <summary> IPv6 no next header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.DSTOPTS"> <summary> IPv6 destination options. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.MTP"> <summary> Multicast Transport Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.ENCAP"> <summary> Encapsulation Header. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.PIM"> <summary> Protocol Independent Multicast. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.COMP"> <summary> Compression Header Protocol. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.RAW"> <summary> Raw IP packets. </summary> </member> <member name="F:PacketDotNet.IPProtocolType.MASK"> <summary> IP protocol mask.</summary> </member> <member name="T:PacketDotNet.IpVersion"> <summary> Code constants for internet protocol versions. </summary> </member> <member name="F:PacketDotNet.IpVersion.IPv4"> <summary> Internet protocol version 4.</summary> </member> <member name="F:PacketDotNet.IpVersion.IPv6"> <summary> Internet protocol version 6.</summary> </member> <member name="T:PacketDotNet.LinkLayers"> <summary> Link-layer type codes. <p> Taken from libpcap/bpf/net/bpf.h and pcap/net/bpf.h. </p><p> The link-layer type is used to determine what data-structure the IP protocol bits will be encapsulated inside of. </p><p> On a 10/100mbps network, packets are encapsulated inside of ethernet. 14-byte ethernet headers which contain MAC addresses and an ethernet type field. </p><p> On ethernet over ppp, the link-layer type is raw, and packets are not encapsulated in any ethernet header. </p></summary> </member> <member name="F:PacketDotNet.LinkLayers.Null"> <summary> no link-layer encapsulation </summary> </member> <member name="F:PacketDotNet.LinkLayers.Ethernet"> <summary> Ethernet (10Mb) </summary> </member> <member name="F:PacketDotNet.LinkLayers.ExperimentalEthernet3MB"> <summary> Experimental Ethernet (3Mb) </summary> </member> <member name="F:PacketDotNet.LinkLayers.AmateurRadioAX25"> <summary> Amateur Radio AX.25 </summary> </member> <member name="F:PacketDotNet.LinkLayers.ProteonProNetTokenRing"> <summary> Proteon ProNET Token Ring </summary> </member> <member name="F:PacketDotNet.LinkLayers.Chaos"> <summary> Chaos </summary> </member> <member name="F:PacketDotNet.LinkLayers.Ieee802"> <summary> IEEE 802 Networks </summary> </member> <member name="F:PacketDotNet.LinkLayers.ArcNet"> <summary> ARCNET </summary> </member> <member name="F:PacketDotNet.LinkLayers.Slip"> <summary> Serial Line IP </summary> </member> <member name="F:PacketDotNet.LinkLayers.Ppp"> <summary> Point-to-point Protocol </summary> </member> <member name="F:PacketDotNet.LinkLayers.Fddi"> <summary> FDDI </summary> </member> <member name="F:PacketDotNet.LinkLayers.AtmRfc1483"> <summary> LLC/SNAP encapsulated atm </summary> </member> <member name="F:PacketDotNet.LinkLayers.Raw"> <summary> raw IP </summary> </member> <member name="F:PacketDotNet.LinkLayers.SlipBSD"> <summary> BSD Slip.</summary> </member> <member name="F:PacketDotNet.LinkLayers.PppBSD"> <summary> BSD PPP.</summary> </member> <member name="F:PacketDotNet.LinkLayers.AtmClip"> <summary> IP over ATM.</summary> </member> <member name="F:PacketDotNet.LinkLayers.PppSerial"> <summary> PPP over HDLC.</summary> </member> <member name="F:PacketDotNet.LinkLayers.CiscoHDLC"> <summary> Cisco HDLC.</summary> </member> <member name="F:PacketDotNet.LinkLayers.Ieee80211"> <summary> IEEE 802.11 wireless.</summary> </member> <member name="F:PacketDotNet.LinkLayers.Loop"> <summary> OpenBSD loopback.</summary> </member> <member name="F:PacketDotNet.LinkLayers.LinuxSLL"> <summary> Linux cooked sockets.</summary> </member> <member name="F:PacketDotNet.LinkLayers.Ieee80211_Radio"> <summary> Header for 802.11 plus a number of bits of link-layer information including radio information, used by some recent BSD drivers as well as the madwifi Atheros driver for Linux. </summary> </member> <member name="F:PacketDotNet.LinkLayers.PerPacketInformation"> <summary> Per Packet Information encapsulated packets. DLT_ requested by Gianluca Varenni &lt;gianluca.varenni@cacetech.com&gt;. See http://www.cacetech.com/documents/PPI%20Header%20format%201.0.7.pdf </summary> </member> <member name="T:PacketDotNet.Utils.HexPrinter"> <summary> Helper class that prints out an array of hex values </summary> </member> <member name="M:PacketDotNet.Utils.HexPrinter.GetString(System.Byte[],System.Int32,System.Int32)"> <summary> Create a string that contains the hex values of byte[] Byte in text form </summary> <param name="Byte"> A <see cref="T:System.Byte" /></param> <param name="Offset"> A <see cref="T:System.Int32" /></param> <param name="Length"> A <see cref="T:System.Int32" /></param> <returns> A <see cref="T:System.String" /></returns> </member> <member name="M:PacketDotNet.Utils.HexPrinter.PrintMACAddress(System.Net.NetworkInformation.PhysicalAddress)"> <summary> Creates a string from a Physical address in the format "xx:xx:xx:xx:xx:xx" </summary> <param name="address"> A <see cref="T:System.Net.NetworkInformation.PhysicalAddress" /></param> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Utils.RandomUtils"> <summary> Random utility methods </summary> </member> <member name="M:PacketDotNet.Utils.RandomUtils.GetIPAddress(PacketDotNet.IpVersion)"> <summary> Generate a random ip address </summary> <param name="version"> A <see cref="T:PacketDotNet.IpVersion" /></param> <returns> A <see cref="T:System.Net.IPAddress" /></returns> </member> <!--FIXME: Invalid documentation markup was found for member M:PacketDotNet.Utils.RandomUtils.LongestStringLength(System.Collections.Generic.List{System.String})--> <member name="T:PacketDotNet.PayloadType"> <summary> Differentiates between a packet class payload, a byte[] payload or no payload </summary> </member> <member name="T:PacketDotNet.ICMPv6Types"> <summary> ICMPv6 types, see http://en.wikipedia.org/wiki/ICMPv6 and http://www.iana.org/assignments/icmpv6-parameters </summary> </member> <member name="T:PacketDotNet.ARPOperation"> <summary> The possible ARP operation values </summary> <remarks> References: - http://www.networksorcery.com/enp/default1101.htm </remarks> </member> <member name="F:PacketDotNet.ARPOperation.Request"> <summary>Request</summary> <remarks>See RFC 826, RFC 5227</remarks> </member> <member name="F:PacketDotNet.ARPOperation.Response"> <summary>Response</summary> <remarks>See RFC 826, RFC 1868, RFC 5227</remarks> </member> <member name="F:PacketDotNet.ARPOperation.RequestReverse"> <summary>Request Reverse</summary> <remarks>See RFC 903</remarks> </member> <member name="F:PacketDotNet.ARPOperation.ReplyReverse"> <summary>Reply Reverse</summary> <remarks>See RFC 903</remarks> </member> <member name="F:PacketDotNet.ARPOperation.DRARPRequest"> <summary>DRARP Request</summary> <remarks>See RFC 1931</remarks> </member> <member name="F:PacketDotNet.ARPOperation.DRARPReply"> <summary>DRARP Reply</summary> <remarks>See RFC 1931</remarks> </member> <member name="F:PacketDotNet.ARPOperation.DRARPError"> <summary>DRARP Error</summary> <remarks>See RFC 1931</remarks> </member> <member name="F:PacketDotNet.ARPOperation.InARPRequest"> <summary>InARP Request</summary> <remarks>See RFC 1293</remarks> </member> <member name="F:PacketDotNet.ARPOperation.InARPReply"> <summary>InARP Reply</summary> <remarks>See RFC 1293</remarks> </member> <member name="F:PacketDotNet.ARPOperation.ARPNAK"> <summary>ARP NAK</summary> <remarks>See RFC 1577</remarks> </member> <member name="F:PacketDotNet.ARPOperation.MARSRequest"> <summary>MARS Request</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSMulti"> <summary>MARS Multi</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSMServ"> <summary>MARS MServ</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSJoin"> <summary>MARS Join</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSLeave"> <summary>MARS Leave</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSNAK"> <summary>MARS NAK</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSUnserv"> <summary>MARS Unserv</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSSJoin"> <summary>MARS SJoin</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSSLeave"> <summary>MARS SLeave</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSGrouplistRequest"> <summary>MARS Grouplist Request</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSGrouplistReply"> <summary>MARS Grouplist Reply</summary> </member> <member name="F:PacketDotNet.ARPOperation.MARSRedirectMap"> <summary>MARS Redirect Map</summary> </member> <member name="F:PacketDotNet.ARPOperation.MaposUnarp"> <summary>MARS UNARP</summary> <remarks>See RFC 2176</remarks> </member> <member name="F:PacketDotNet.ARPOperation.OP_EXP1"> <summary>OP_EXP1</summary> <remarks>See RFC 5494</remarks> </member> <member name="F:PacketDotNet.ARPOperation.OP_EXP2"> <summary>OP_EXP2</summary> </member> <member name="T:PacketDotNet.PPPoEPacket"> <summary> Point to Point Protocol See http://tools.ietf.org/html/rfc2516 </summary> </member> <member name="M:PacketDotNet.PPPoEPacket.#ctor(PacketDotNet.PPPoECode,System.UInt16)"> <summary> Construct a new PPPoEPacket from source and destination mac addresses </summary> </member> <member name="M:PacketDotNet.PPPoEPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.PPPoEPacket.Version"> <summary> PPPoe version, must be 0x1 according to RFC </summary> FIXME: This currently outputs the wrong version number</member> <member name="P:PacketDotNet.PPPoEPacket.Type"> <summary> Type, must be 0x1 according to RFC </summary> </member> <member name="P:PacketDotNet.PPPoEPacket.Code"> <summary> </summary> FIXME: This currently outputs the wrong code</member> <member name="P:PacketDotNet.PPPoEPacket.SessionId"> <summary> Session identifier for this PPPoe packet </summary> </member> <member name="P:PacketDotNet.PPPoEPacket.Length"> <summary> Length of the PPPoe payload, not including the PPPoe header </summary> </member> <member name="P:PacketDotNet.PPPoEPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.PPPoEPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.PPPoEPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the encapsulated PPPoE of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.ARPPacket" /></returns> </member> <member name="M:PacketDotNet.PPPoEPacket.RandomPacket"> <summary> Generate a random PPPoEPacket </summary> <returns> A <see cref="T:PacketDotNet.PPPoEPacket" /></returns> </member> <member name="T:PacketDotNet.PPPoEFields"> <summary> Point to Point Protocol See http://tools.ietf.org/html/rfc2516 </summary> </member> <member name="F:PacketDotNet.PPPoEFields.VersionTypeLength"> <summary> Size in bytes of the version/type field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.CodeLength"> <summary> Size in bytes of the code field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.SessionIdLength"> <summary> Size in bytes of the SessionId field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.LengthLength"> <summary> Size in bytes of the Length field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.VersionTypePosition"> <summary> Offset from the start of the header to the version/type field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.CodePosition"> <summary> Offset from the start of the header to the Code field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.SessionIdPosition"> <summary> Offset from the start of the header to the SessionId field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.LengthPosition"> <summary> Offset from the start of the header to the Length field </summary> </member> <member name="F:PacketDotNet.PPPoEFields.HeaderLength"> <summary> Length of the overall PPPoe header </summary> </member> <member name="T:PacketDotNet.PPPoECode"> <summary> Values for the Code field of a PPPoE packet See http://tools.ietf.org/html/rfc2516 </summary> </member> <member name="F:PacketDotNet.PPPoECode.SessionStage"> <summary> The PPPoe payload must contain a PPP packet </summary> </member> <member name="F:PacketDotNet.PPPoECode.ActiveDiscoveryOffer"> <summary> Active Discovery Offer (PADO) packet </summary> </member> <member name="F:PacketDotNet.PPPoECode.ActiveDiscoveryInitiation"> <summary> From RFC2516: The Host sends the PADI packet with the DESTINATION_ADDR set to the broadcast address. The CODE field is set to 0x09 and the SESSION_ID MUST be set to 0x0000. The PADI packet MUST contain exactly one TAG of TAG_TYPE Service- Name, indicating the service the Host is requesting, and any number of other TAG types. An entire PADI packet (including the PPPoE header) MUST NOT exceed 1484 octets so as to leave sufficient room for a relay agent to add a Relay-Session-Id TAG. </summary> </member> <member name="F:PacketDotNet.PPPoECode.ActiveDiscoveryTerminate"> <summary> Indicate that the PPPoe session specified by the SessionId field of the PPPoe packet has been terminated </summary> </member> <member name="T:PacketDotNet.PPPPacket"> <summary> PPP packet See http://en.wikipedia.org/wiki/Point-to-Point_Protocol </summary> </member> <member name="M:PacketDotNet.PPPPacket.#ctor(PacketDotNet.PPPoECode,System.UInt16)"> <summary> Construct a new PPPPacket from source and destination mac addresses </summary> </member> <member name="M:PacketDotNet.PPPPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.PPPPacket.Protocol"> <summary> See http://www.iana.org/assignments/ppp-numbers </summary> </member> <member name="P:PacketDotNet.PPPPacket.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.PPPPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.PPPPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the encapsulated PPPPacket of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.PPPPacket" /></returns> </member> <member name="M:PacketDotNet.PPPPacket.RandomPacket"> <summary> Generate a random PPPoEPacket </summary> <returns> A <see cref="T:PacketDotNet.PPPoEPacket" /></returns> </member> <member name="T:PacketDotNet.PPPFields"> <summary> The fields in a PPP packet See http://en.wikipedia.org/wiki/Point-to-Point_Protocol </summary> </member> <member name="F:PacketDotNet.PPPFields.ProtocolLength"> <summary> Length of the Protocol field in bytes, the field is of type PPPProtocol </summary> </member> <member name="F:PacketDotNet.PPPFields.ProtocolPosition"> <summary> Offset from the start of the PPP packet where the Protocol field is located </summary> </member> <member name="F:PacketDotNet.PPPFields.HeaderLength"> <summary> The length of the header </summary> </member> <member name="T:PacketDotNet.PPPProtocol"> <summary> Indicates the protocol encapsulated by the PPP packet See http://www.iana.org/assignments/ppp-numbers </summary> </member> <member name="F:PacketDotNet.PPPProtocol.Padding"> <summary> Padding </summary> </member> <member name="F:PacketDotNet.PPPProtocol.IPv4"> <summary> IPv4 </summary> </member> <member name="F:PacketDotNet.PPPProtocol.IPv6"> <summary> IPv6 </summary> </member> <member name="T:PacketDotNet.ICMPv4TypeCodes"> <summary> Code constants for ICMP message types. From http://en.wikipedia.org/wiki/Internet_Control_Message_Protocol#List_of_permitted_control_messages_.28incomplete_list.29 Note that these values represent the combined type and code fields, where the type field is the upper byte </summary> </member> <member name="T:PacketDotNet.ICMPv4Fields"> <summary> ICMP protocol field encoding information. See http://en.wikipedia.org/wiki/ICMPv6 </summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.TypeCodeLength"> <summary> Length of the ICMP message type code in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.ChecksumLength"> <summary> Length of the ICMP header checksum in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.IDLength"> <summary> Length of the ICMP ID field in bytes.</summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.SequenceLength"> <summary> Length of the ICMP Sequence field in bytes </summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.TypeCodePosition"> <summary> Position of the ICMP message type/code.</summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.ChecksumPosition"> <summary> Position of the ICMP header checksum.</summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.IDPosition"> <summary> Position of the ICMP ID field </summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.SequencePosition"> <summary> Position of the Sequence field </summary> </member> <member name="F:PacketDotNet.ICMPv4Fields.HeaderLength"> <summary> Length in bytes of an ICMP header.</summary> </member> <member name="T:PacketDotNet.ICMPv4Packet"> <summary> An ICMP packet See http://en.wikipedia.org/wiki/Internet_Control_Message_Protocol </summary> </member> <member name="M:PacketDotNet.ICMPv4Packet.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.ICMPv4Packet.#ctor(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Packet)"> <summary> Construct with parent packet </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="ParentPacket"> A <see cref="T:PacketDotNet.Packet" /></param> </member> <member name="P:PacketDotNet.ICMPv4Packet.TypeCode"> <value> The Type/Code enum value </value> </member> <member name="P:PacketDotNet.ICMPv4Packet.Checksum"> <value> Checksum value </value> </member> <member name="P:PacketDotNet.ICMPv4Packet.ID"> <summary> ID field </summary> </member> <member name="P:PacketDotNet.ICMPv4Packet.Sequence"> <summary> Sequence field </summary> </member> <member name="P:PacketDotNet.ICMPv4Packet.Data"> <summary> Contents of the ICMP packet </summary> </member> <member name="P:PacketDotNet.ICMPv4Packet.Color"> <summary> Fetch ascii escape sequence of the color associated with this packet type.</summary> </member> <member name="M:PacketDotNet.ICMPv4Packet.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.ICMPv4Packet.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the ICMPv4Packet inside of Packet p or null if there is no encapsulated ICMPv4Packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.ICMPv4Packet" /></returns> </member> <member name="T:PacketDotNet.Utils.ByteArraySegment"> <summary> Container class that refers to a segment of bytes in a byte[] Used to ensure high performance by allowing memory copies to be avoided </summary> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.#ctor(System.Byte[])"> <summary> Constructor </summary> <param name="Bytes"> A <see cref="T:System.Byte[]" /></param> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Constructor from a byte array, offset into the byte array and a length beyond that offset of the bytes this class is referencing </summary> <param name="Bytes"> A <see cref="T:System.Byte" /></param> <param name="Offset"> A <see cref="T:System.Int32" /></param> <param name="Length"> A <see cref="T:System.Int32" /></param> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.#ctor(System.Byte[],System.Int32,System.Int32,System.Int32)"> <summary> Constructor </summary> <param name="Bytes"> A <see cref="T:System.Byte[]" /></param> <param name="Offset"> A <see cref="T:System.Int32" /></param> <param name="Length"> A <see cref="T:System.Int32" /></param> <param name="BytesLength"> A <see cref="T:System.Int32" /></param> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Copy constructor </summary> <param name="original"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.Utils.ByteArraySegment.Bytes"> <value> The byte[] array </value> </member> <member name="P:PacketDotNet.Utils.ByteArraySegment.BytesLength"> <value> The maximum number of bytes we should treat Bytes as having, allows for controling the number of bytes produced by EncapsulatedBytes() </value> </member> <member name="P:PacketDotNet.Utils.ByteArraySegment.Length"> <value> Number of bytes beyond the offset into Bytes </value> </member> <member name="P:PacketDotNet.Utils.ByteArraySegment.Offset"> <value> Offset into Bytes </value> </member> <member name="P:PacketDotNet.Utils.ByteArraySegment.NeedsCopyForActualBytes"> <summary> Return true if we need to perform a copy to get the bytes represented by this class </summary> <returns> A <see cref="T:System.Boolean" /></returns> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.ActualBytes"> <summary> Returns a contiguous byte[] from this container, if necessary, by copying the bytes from the current offset into a newly allocated byte[]. NeedsCopyForActualBytes can be used to determine if the copy is necessary </summary> <returns> A <see cref="T:System.Byte" /></returns> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.EncapsulatedBytes"> <summary> Helper method that returns the segment immediately following this instance, useful for processing where the parent wants to pass the next segment to a sub class for processing </summary> <returns> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></returns> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.EncapsulatedBytes(System.Int32)"> <summary> Create the segment after the current one </summary> <param name="NewSegmentLength"> A <see cref="T:System.Int32" /> that can be used to limit the segment length of the ByteArraySegment that is to be returned. Often used to exclude trailing bytes. </param> <returns> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></returns> </member> <member name="M:PacketDotNet.Utils.ByteArraySegment.ToString"> <summary> Format the class information as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.PacketOrByteArraySegment"> <summary> Encapsulates and ensures that we have either a Packet OR a ByteArraySegment but not both </summary> </member> <member name="P:PacketDotNet.PacketOrByteArraySegment.Type"> <value> Whether or not this container contains a packet, a byte[] or neither </value> </member> <member name="M:PacketDotNet.PacketOrByteArraySegment.AppendToMemoryStream(System.IO.MemoryStream)"> <summary> Appends to the MemoryStream either the byte[] represented by TheByteArray, or if ThePacket is non-null, the Packet.Bytes will be appended to the memory stream which will append ThePacket's header and any encapsulated packets it contains </summary> <param name="ms"> A <see cref="T:System.IO.MemoryStream" /></param> </member> <member name="T:PacketDotNet.LLDPPacket"> <summary> A LLDP packet. As specified in IEEE Std 802.1AB </summary> <remarks> See http://en.wikipedia.org/wiki/Link_Layer_Discovery_Protocol for general info See IETF 802.1AB for the full specification </remarks> </member> <member name="M:PacketDotNet.LLDPPacket.#ctor"> <summary> Create an empty LLDPPacket </summary> </member> <member name="M:PacketDotNet.LLDPPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="F:PacketDotNet.LLDPPacket.TlvCollection"> <summary> Contains the TLV's in the LLDPDU </summary> </member> <member name="P:PacketDotNet.LLDPPacket.Item(System.Int32)"> <summary> Allows access of the TlvCollection by index </summary> <param name="index">The index of the item being set/retrieved in the collection</param> <returns>The requested TLV</returns> </member> <member name="P:PacketDotNet.LLDPPacket.Length"> <value> The current length of the LLDPDU </value> </member> <member name="P:PacketDotNet.LLDPPacket.BytesHighPerformance"> <summary> LLDPPacket specific implementation of BytesHighPerformance Necessary because each TLV in the collection may have a byte[] that is not shared by other TLVs NOTE: There is potential for the same performance improvement that the Packet class uses where we check to see if each TLVs uses the same byte[] and that there are no gaps. </summary> </member> <member name="M:PacketDotNet.LLDPPacket.GetEnumerator"> <summary> Enables foreach functionality for this class </summary> <returns>The next item in the list</returns> </member> <member name="M:PacketDotNet.LLDPPacket.ParseByteArrayIntoTlvs(System.Byte[],System.Int32)"> <summary> Parse byte[] into TLVs </summary> </member> <member name="M:PacketDotNet.LLDPPacket.TLVFactory(System.Byte[],System.Int32,PacketDotNet.LLDP.TLVTypes)"> <summary> </summary> <param name="Bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="type"> A <see cref="T:PacketDotNet.LLDP.TLVTypes" /></param> <returns> A <see cref="T:PacketDotNet.LLDP.TLV" /></returns> </member> <member name="M:PacketDotNet.LLDPPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the LLDP inside of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.IpPacket" /></returns> </member> <member name="M:PacketDotNet.LLDPPacket.RandomPacket"> <summary> Create a randomized LLDP packet with some basic TLVs </summary> <returns> A <see cref="T:PacketDotNet.Packet" /></returns> </member> <member name="M:PacketDotNet.LLDPPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="T:PacketDotNet.LLDP.TLVTypes"> <summary> The TLV Types </summary> <remarks> See IETF RFC 802.1AB for more info </remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.EndOfLLDPU"> <summary>Signifies the end of a LLDPU</summary> <description> The End Of LLDPDU TLV is a 2-octet, all-zero TLV that is used to mark the end of the TLV sequence in LLDPDUs </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.ChassisID"> <summary>A Chassis Identifier</summary> <description> A mandatory TLV that identifies the chassis containing the IEEE 802 LAN station associated with the transmitting LLDP agent </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.PortID"> <summary>A Port Identifier</summary> <description> A mandatory TLV that identifies the port component of the MSAP identifier associated with the transmitting LLDP agent. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.TimeToLive"> <summary>Specifies the Time to Live</summary> <description> Indicates the number of seconds that the recipient LLDP agent is to regard the information associated with this MSAP identifier to be valid A value of 0 signals that this source is no longer available and all information associated with it should be deleted. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.PortDescription"> <summary>A Description of the Port</summary> <description> The port description field shall contain an alpha-numeric string that indicates the port’s description. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.SystemName"> <summary>The System's Assigned Name</summary> <description> The System Name TLV allows network management to advertise the system’s assigned name. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.SystemDescription"> <summary>A Description of the System</summary> <description> The System Description TLV allows network management to advertise the system’s description </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.SystemCapabilities"> <summary>A bitmap containing the System's capabilities</summary> <description> The System Capabilities TLV is an optional TLV that identifies the primary function(s) of the system and whether or not these primary functions are enabled. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.ManagementAddress"> <summary>The Management Address</summary> <description> The Management Address TLV identifies an address associated with the local LLDP agent that may be used to reach higher layer entities to assist discovery by network management. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.TLVTypes.OrganizationSpecific"> <summary>A vendor-specifid TLV</summary> <description> This TLV category is provided to allow different organizations, such as IEEE 802.1, IEEE 802.3, IETF, as well as individual software and equipment vendors, to define TLVs that advertise information to remote entities attached to the same media. </description> <remarks>Source: IETF RFC 802.1AB</remarks> </member> <member name="T:PacketDotNet.LLDP.ChassisSubTypes"> <summary> The Chassis ID TLV subtypes </summary> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.ChassisComponent"> <summary>A Chassis Component identifier</summary> <remarks>See IETF RFC 2737</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.InterfaceAlias"> <summary>An Interface Alias identifier</summary> <remarks>See IETF RFC 2863</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.PortComponent"> <summary>A Port Component identifier</summary> <remarks>See IETF RFC 2737</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.MACAddress"> <summary>A MAC (Media Access Control) Address identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.NetworkAddress"> <summary>A Network Address (IP Address) Identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.InterfaceName"> <summary>An Interface Name identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.ChassisSubTypes.LocallyAssigned"> <summary>A Locally Assigned identifier</summary> </member> <member name="T:PacketDotNet.LLDP.PortSubTypes"> <summary> The Port ID TLV subtypes </summary> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.InterfaceAlias"> <summary>An Interface Alias identifier</summary> <remarks>See IETF RFC 2863</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.PortComponent"> <summary>A Port Component identifier</summary> <remarks>See IETF RFC 2737</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.MACAddress"> <summary>A MAC (Media Access Control) Address identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.NetworkAddress"> <summary>A Network Address (IP Address) Identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.InterfaceName"> <summary>An Interface Name identifier</summary> <remarks>See IEEE Std 802</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.AgentCircuitID"> <summary>An Agent Circiut ID identifier</summary> <remarks>See IETF RFC 3046</remarks> </member> <member name="F:PacketDotNet.LLDP.PortSubTypes.LocallyAssigned"> <summary>A Locally Assigned identifier</summary> <remarks>See IETF RFC 3046</remarks> </member> <member name="T:PacketDotNet.LLDP.CapabilityOptions"> <summary> The System Capabilities options </summary> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.Other"> <summary> An Other Type of System </summary> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.Repeater"> <summary>A Repeater</summary> <remarks>See IETF RFC 2108</remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.Bridge"> <summary>A Bridge</summary> <remarks>IETF RFC 2674</remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.WLanAP"> <summary>A WLAN Access Point</summary> <remarks>IEEE 802.11 MIB</remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.Router"> <summary>A Router</summary> <remarks>IETF RFC 1812</remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.Telephone"> <summary>A Telephone</summary> <remarks>IETF RFC 2011 </remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.DocsisCableDevice"> <summary>A DOCSIS Cable Device</summary> <remarks> See IETF RFC 2669 See IETF RFC 2670 </remarks> </member> <member name="F:PacketDotNet.LLDP.CapabilityOptions.StationOnly"> <summary>A Station with no other capabilities</summary> <remarks>IETF RFC 2011</remarks> </member> <member name="T:PacketDotNet.LLDP.TLV"> <summary> A Type-Length-Value object </summary> </member> <member name="M:PacketDotNet.LLDP.TLV.#ctor"> <summary> Create a tlv </summary> </member> <member name="M:PacketDotNet.LLDP.TLV.#ctor(System.Byte[],System.Int32)"> <summary> Creates a TLV </summary> <param name="bytes"> Bytes that comprise the TLV </param> <param name="offset"> The TLVs offset from the start of byte[] bytes </param> </member> <member name="F:PacketDotNet.LLDP.TLV._tlvData"> <summary> Points to the TLV data </summary> </member> <member name="F:PacketDotNet.LLDP.TLV.TypeLength"> <summary> Interface to this TLVs type and length </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.Length"> <summary> Length of value portion of the TLV NOTE: Does not include the length of the Type and Length fields </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.TotalLength"> <summary> Total length of the TLV, including the length of the Type and Length fields </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.Type"> <summary> Tlv type </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.ValueOffset"> <summary> Offset to the value bytes of the TLV </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.Bytes"> <summary> Return a byte[] that contains the tlv </summary> </member> <member name="P:PacketDotNet.LLDP.TLV.tlvData"> <summary> Points to the TLV data </summary> </member> <member name="T:PacketDotNet.LLDP.NetworkAddress"> <summary> A Network Address </summary> </member> <member name="M:PacketDotNet.LLDP.NetworkAddress.#ctor(System.Net.IPAddress)"> <summary> Creates a Network Address entity </summary> <param name="address"> The Network Address </param> </member> <member name="M:PacketDotNet.LLDP.NetworkAddress.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Create a network address from byte data </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="F:PacketDotNet.LLDP.NetworkAddress.AddressFamilyLength"> <summary> Length of AddressFamily field in bytes </summary> </member> <member name="P:PacketDotNet.LLDP.NetworkAddress.Length"> <summary> Number of bytes in the NetworkAddress </summary> </member> <member name="P:PacketDotNet.LLDP.NetworkAddress.AddressFamily"> <summary>The format of the Network Address</summary> </member> <member name="P:PacketDotNet.LLDP.NetworkAddress.Address"> <summary>The Network Address</summary> </member> <member name="M:PacketDotNet.LLDP.NetworkAddress.Equals(System.Object)"> <summary> Equals override </summary> <param name="obj"> A <see cref="T:System.Object" /></param> <returns> A <see cref="T:System.Boolean" /></returns> </member> <member name="M:PacketDotNet.LLDP.NetworkAddress.GetHashCode"> <summary> GetHashCode() override </summary> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="M:PacketDotNet.LLDP.NetworkAddress.ToString"> <summary> ToString() override </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.LLDP.InterfaceNumbering"> <summary> Interface Numbering Types </summary> <remarks>Source IETF RFC 802.1AB</remarks> </member> <member name="F:PacketDotNet.LLDP.InterfaceNumbering.Unknown"> <summary>Unknown</summary> </member> <member name="F:PacketDotNet.LLDP.InterfaceNumbering.ifIndex"> <summary>Interface Index</summary> </member> <member name="F:PacketDotNet.LLDP.InterfaceNumbering.SystemPortNumber"> <summary>System Port Number</summary> </member> <member name="T:PacketDotNet.LLDP.EndOfLLDPDU"> <summary> An End Of LLDPDU TLV </summary> </member> <member name="M:PacketDotNet.LLDP.EndOfLLDPDU.#ctor(System.Byte[],System.Int32)"> <summary> Parses bytes into an End Of LLDPDU TLV </summary> <param name="bytes"> TLV bytes </param> <param name="offset"> The End Of LLDPDU TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.EndOfLLDPDU.#ctor"> <summary> Creates an End Of LLDPDU TLV </summary> </member> <member name="M:PacketDotNet.LLDP.EndOfLLDPDU.ToString"> <summary> Convert this TTL TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.ChassisID"> <summary> A Chassis ID TLV </summary> </member> <member name="M:PacketDotNet.LLDP.ChassisID.#ctor(System.Byte[],System.Int32)"> <summary> Creates a Chassis ID TLV by parsing a byte[] </summary> <param name="bytes"> </param> <param name="offset"> The Chassis ID TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.ChassisID.#ctor(PacketDotNet.LLDP.ChassisSubTypes,System.Object)"> <summary> Creates a Chassis ID TLV and sets it value </summary> <param name="subType"> The ChassisID subtype </param> <param name="subTypeValue"> The subtype's value </param> </member> <member name="M:PacketDotNet.LLDP.ChassisID.#ctor(System.Net.NetworkInformation.PhysicalAddress)"> <summary> Create a ChassisID given a mac address </summary> <param name="MACAddress"> A <see cref="T:System.Net.NetworkInformation.PhysicalAddress" /></param> </member> <member name="M:PacketDotNet.LLDP.ChassisID.#ctor(System.String)"> <summary> Create a ChassisID given an interface name http://tools.ietf.org/search/rfc2863 page 38 </summary> <param name="InterfaceName"> A <see cref="T:System.String" /></param> </member> <member name="F:PacketDotNet.LLDP.ChassisID.SubTypeLength"> <summary> Length of the sub type field in bytes </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.SubType"> <value> The type of the TLV subtype </value> </member> <member name="P:PacketDotNet.LLDP.ChassisID.SubTypeValue"> <value> The TLV subtype value </value> </member> <member name="P:PacketDotNet.LLDP.ChassisID.ChassisComponent"> <summary> If SubType is ChassisComponent </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.InterfaceName"> <summary> If SubType is InterfaceName the interface name </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.MACAddress"> <summary> If SubType is MACAddress the mac address </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.NetworkAddress"> <summary> If SubType is NetworkAddress the network address </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.PortComponent"> <summary> If SubType is PortComponent </summary> </member> <member name="P:PacketDotNet.LLDP.ChassisID.InterfaceAlias"> <summary> If SubType is InterfaceAlias </summary> </member> <member name="M:PacketDotNet.LLDP.ChassisID.EmptyTLVDataInit"> <summary> Helper method to reduce duplication in type specific constructors </summary> </member> <member name="M:PacketDotNet.LLDP.ChassisID.ToString"> <summary> Convert this Chassis ID TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.PortID"> <summary> A Port ID TLV </summary> </member> <member name="M:PacketDotNet.LLDP.PortID.#ctor(System.Byte[],System.Int32)"> <summary> Creates a Port ID TLV </summary> <param name="bytes"> </param> <param name="offset"> The Port ID TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.PortID.#ctor(PacketDotNet.LLDP.PortSubTypes,System.Object)"> <summary> Creates a Port ID TLV and sets it value </summary> <param name="subType"> The Port ID SubType </param> <param name="subTypeValue"> The subtype's value </param> </member> <member name="M:PacketDotNet.LLDP.PortID.#ctor(PacketDotNet.LLDP.NetworkAddress)"> <summary> Construct a PortID from a NetworkAddress </summary> <param name="networkAddress"> A <see cref="!:LLDP.NetworkAddress" /></param> </member> <member name="P:PacketDotNet.LLDP.PortID.SubType"> <value> The type of the TLV subtype </value> </member> <member name="P:PacketDotNet.LLDP.PortID.SubTypeValue"> <value> The TLV subtype value </value> </member> <member name="P:PacketDotNet.LLDP.PortID.DataOffset"> <summary> Offset to the value field </summary> </member> <member name="P:PacketDotNet.LLDP.PortID.DataLength"> <summary> Size of the value field </summary> </member> <member name="M:PacketDotNet.LLDP.PortID.EmptyTLVDataInit"> <summary> Helper method to reduce duplication in type specific constructors </summary> </member> <member name="M:PacketDotNet.LLDP.PortID.ToString"> <summary> Convert this Port ID TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.TimeToLive"> <summary> A Time to Live TLV </summary> </member> <member name="M:PacketDotNet.LLDP.TimeToLive.#ctor(System.Byte[],System.Int32)"> <summary> Creates a TTL TLV </summary> <param name="bytes"> </param> <param name="offset"> The TTL TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.TimeToLive.#ctor(System.UInt16)"> <summary> Creates a TTL TLV and sets it value </summary> <param name="seconds"> The length in seconds until the LLDP is refreshed </param> </member> <member name="F:PacketDotNet.LLDP.TimeToLive.ValueLength"> <summary> Number of bytes in the value portion of this tlv </summary> </member> <member name="P:PacketDotNet.LLDP.TimeToLive.Seconds"> <value> The number of seconds until the LLDP needs to be refreshed A value of 0 means that the LLDP source is closed and should no longer be refreshed </value> </member> <member name="M:PacketDotNet.LLDP.TimeToLive.ToString"> <summary> Convert this TTL TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.PortDescription"> <summary> A Port Description TLV </summary> </member> <member name="M:PacketDotNet.LLDP.PortDescription.#ctor(System.Byte[],System.Int32)"> <summary> Creates a Port Description TLV </summary> <param name="bytes"> </param> <param name="offset"> The Port Description TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.PortDescription.#ctor(System.String)"> <summary> Creates a Port Description TLV and sets it value </summary> <param name="description"> A textual description of the port </param> </member> <member name="P:PacketDotNet.LLDP.PortDescription.Description"> <value> A textual Description of the port </value> </member> <member name="T:PacketDotNet.LLDP.SystemName"> <summary> A System Name TLV </summary> </member> <member name="M:PacketDotNet.LLDP.SystemName.#ctor(System.Byte[],System.Int32)"> <summary> Creates a System Name TLV </summary> <param name="bytes"> </param> <param name="offset"> The System Name TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.SystemName.#ctor(System.String)"> <summary> Creates a System Name TLV and sets it value </summary> <param name="name"> A textual Name of the system </param> </member> <member name="P:PacketDotNet.LLDP.SystemName.Name"> <value> A textual Name of the system </value> </member> <member name="T:PacketDotNet.LLDP.SystemDescription"> <summary> A System Description TLV </summary> </member> <member name="M:PacketDotNet.LLDP.SystemDescription.#ctor(System.Byte[],System.Int32)"> <summary> Creates a System Description TLV </summary> <param name="bytes"> </param> <param name="offset"> The System Description TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.SystemDescription.#ctor(System.String)"> <summary> Creates a System Description TLV and sets it value </summary> <param name="description"> A textual Description of the system </param> </member> <member name="P:PacketDotNet.LLDP.SystemDescription.Description"> <value> A textual Description of the system </value> </member> <member name="T:PacketDotNet.LLDP.SystemCapabilities"> <summary> A System Capabilities TLV [TLVTypeLength - 2 bytes][System Capabilities - 2 bytes][Enabled Capabilities - 2 bytes] </summary> </member> <member name="M:PacketDotNet.LLDP.SystemCapabilities.#ctor(System.Byte[],System.Int32)"> <summary> Creates a System Capabilities TLV </summary> <param name="bytes"> </param> <param name="offset"> The System Capabilities TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.SystemCapabilities.#ctor(System.UInt16,System.UInt16)"> <summary> Creates a System Capabilities TLV and sets the value </summary> <param name="capabilities"> A bitmap containing the available System Capabilities </param> <param name="enabled"> A bitmap containing the enabled System Capabilities </param> </member> <member name="P:PacketDotNet.LLDP.SystemCapabilities.Capabilities"> <value> A bitmap containing the available System Capabilities </value> </member> <member name="P:PacketDotNet.LLDP.SystemCapabilities.Enabled"> <value> A bitmap containing the Enabled System Capabilities </value> </member> <member name="M:PacketDotNet.LLDP.SystemCapabilities.IsCapable(PacketDotNet.LLDP.CapabilityOptions)"> <summary> Checks whether the system is capable of a certain function </summary> <param name="capability"> The capability being checked </param> <returns> Whether or not the system is capable of the function being tested </returns> </member> <member name="M:PacketDotNet.LLDP.SystemCapabilities.IsEnabled(PacketDotNet.LLDP.CapabilityOptions)"> <summary> Checks whether the specified function has been enabled on the system </summary> <param name="capability"> The capability being checked </param> <returns> Whether or not the specified function is enabled </returns> </member> <member name="M:PacketDotNet.LLDP.SystemCapabilities.ToString"> <summary> Convert this System Capabilities TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.ManagementAddress"> <summary> A Time to Live TLV [TLV Type Length : 2][Mgmt Addr length : 1][Mgmt Addr Subtype : 1][Mgmt Addr : 1-31] [Interface Subtype : 1][Interface number : 4][OID length : 1][OID : 0-128] </summary> </member> <member name="M:PacketDotNet.LLDP.ManagementAddress.#ctor(System.Byte[],System.Int32)"> <summary> Creates a Management Address TLV </summary> <param name="bytes"> The LLDP Data unit being modified </param> <param name="offset"> The Management Address TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.ManagementAddress.#ctor(PacketDotNet.LLDP.NetworkAddress,PacketDotNet.LLDP.InterfaceNumbering,System.UInt32,System.String)"> <summary> Creates a Management Address TLV and sets it value </summary> <param name="managementAddress"> The Management Address </param> <param name="interfaceSubType"> The Interface Numbering Sub Type </param> <param name="ifNumber"> The Interface Number </param> <param name="oid"> The Object Identifier </param> </member> <member name="F:PacketDotNet.LLDP.ManagementAddress.MgmtAddressLengthLength"> <summary> Number of bytes in the AddressLength field </summary> </member> <member name="F:PacketDotNet.LLDP.ManagementAddress.InterfaceNumberSubTypeLength"> <summary> Number of bytes in the interface number subtype field </summary> </member> <member name="F:PacketDotNet.LLDP.ManagementAddress.InterfaceNumberLength"> <summary> Number of bytes in the interface number field </summary> </member> <member name="F:PacketDotNet.LLDP.ManagementAddress.ObjectIdentifierLengthLength"> <summary> Number of bytes in the object identifier length field </summary> </member> <member name="F:PacketDotNet.LLDP.ManagementAddress.maxObjectIdentifierLength"> <summary> Maximum number of bytes in the object identifier field </summary> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.AddressLength"> <value> The Management Address Length </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.AddressSubType"> <value> The Management Address Subtype Forward to the MgmtAddress instance </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.MgmtAddress"> <value> The Management Address </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.InterfaceSubType"> <value> Interface Number Sub Type </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.InterfaceNumber"> <value> Interface Number </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.ObjIdLength"> <value> Object ID Length </value> </member> <member name="P:PacketDotNet.LLDP.ManagementAddress.ObjectIdentifier"> <value> Object ID </value> </member> <member name="M:PacketDotNet.LLDP.ManagementAddress.ToString"> <summary> Convert this Management Address TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.OrganizationSpecific"> <summary> An Organization Specific TLV [TLV Type Length : 2][Organizationally Unique Identifier OUI : 3] [Organizationally Defined Subtype : 1][Organizationally Defined Information String : 0 - 507] </summary> </member> <member name="M:PacketDotNet.LLDP.OrganizationSpecific.#ctor(System.Byte[],System.Int32)"> <summary> Creates an Organization Specific TLV </summary> <param name="bytes"> The LLDP Data unit being modified </param> <param name="offset"> The Organization Specific TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.OrganizationSpecific.#ctor(System.Byte[],System.Int32,System.Byte[])"> <summary> Creates an Organization Specific TLV and sets it value </summary> <param name="oui"> An Organizationally Unique Identifier </param> <param name="subType"> An Organizationally Defined SubType </param> <param name="infoString"> An Organizationally Defined Information String </param> </member> <member name="P:PacketDotNet.LLDP.OrganizationSpecific.OrganizationUniqueID"> <summary> An Organizationally Unique Identifier </summary> </member> <member name="P:PacketDotNet.LLDP.OrganizationSpecific.OrganizationDefinedSubType"> <summary> An Organizationally Defined SubType </summary> </member> <member name="P:PacketDotNet.LLDP.OrganizationSpecific.OrganizationDefinedInfoString"> <summary> An Organizationally Defined Information String </summary> </member> <member name="M:PacketDotNet.LLDP.OrganizationSpecific.ToString"> <summary> Convert this Organization Specific TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.LLDP.TLVTypeLength"> <summary> Tlv type and length are 2 bytes See http://en.wikipedia.org/wiki/Link_Layer_Discovery_Protocol#Frame_structure </summary> </member> <member name="M:PacketDotNet.LLDP.TLVTypeLength.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Construct a TLVTypeLength for a TLV </summary> <param name="byteArraySegment"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="F:PacketDotNet.LLDP.TLVTypeLength.TypeLengthLength"> <summary> Length in bytes of the tlv type and length fields </summary> </member> <member name="P:PacketDotNet.LLDP.TLVTypeLength.Type"> <value> The TLV Value's Type </value> </member> <member name="P:PacketDotNet.LLDP.TLVTypeLength.Length"> <value> The TLV Value's Length NOTE: Value is the length of the TLV Value only, does not include the length of the type and length fields </value> </member> <member name="P:PacketDotNet.LLDP.TLVTypeLength.TypeAndLength"> <value> A unsigned short representing the concatenated Type and Length </value> </member> <member name="T:PacketDotNet.LLDP.AddressFamily"> <summary> The IANA (Internet Assigned Numbers Authority) Address Family </summary> <remarks>Source http://www.iana.org/assignments/address-family-numbers/</remarks> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.IPv4"> <summary>IP version 4</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.IPv6"> <summary>IP version 6</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.NSAP"> <summary>NSAP</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.HDLC"> <summary>HDLC</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.BBN1822"> <summary>BBN 1822</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.Eth802"> <summary>802 (includes all 802 media plus Ethernet "canonical format")</summary> </member> <member name="F:PacketDotNet.LLDP.AddressFamily.E163"> <summary>E.163</summary> </member> <member name="T:PacketDotNet.LLDP.StringTLV"> <summary> Base class for several TLV types that all contain strings </summary> </member> <member name="M:PacketDotNet.LLDP.StringTLV.#ctor(System.Byte[],System.Int32)"> <summary> Creates a String TLV </summary> <param name="bytes"> </param> <param name="offset"> The Port Description TLV's offset from the origin of the LLDP </param> </member> <member name="M:PacketDotNet.LLDP.StringTLV.#ctor(PacketDotNet.LLDP.TLVTypes,System.String)"> <summary> Create from a type and string value </summary> <param name="tlvType"> A <see cref="T:PacketDotNet.LLDP.TLVTypes" /></param> <param name="StringValue"> A <see cref="T:System.String" /></param> </member> <member name="P:PacketDotNet.LLDP.StringTLV.StringValue"> <value> A textual Description of the port </value> </member> <member name="M:PacketDotNet.LLDP.StringTLV.ToString"> <summary> Convert this Port Description TLV to a string. </summary> <returns> A human readable string </returns> </member> <member name="T:PacketDotNet.TLVCollection"> <summary> Custom collection for TLV types Special behavior includes: - Preventing an EndOfLLDPDU tlv from being added out of place - Checking and throwing exceptions if one-per-LLDP packet TLVs are added multiple times </summary> </member> <member name="M:PacketDotNet.TLVCollection.InsertItem(System.Int32,PacketDotNet.LLDP.TLV)"> <summary> Override to: - Prevent duplicate end tlvs from being added - Ensure that an end tlv is present - Replace any automatically added end tlvs with the user provided tlv </summary> <param name="index"> A <see cref="T:System.Int32" /></param> <param name="item"> A <see cref="T:PacketDotNet.LLDP.TLV" /></param> </member> <member name="T:PacketDotNet.WakeOnLanPacket"> <summary> Wake-On-Lan See: http://en.wikipedia.org/wiki/Wake-on-LAN See: http://wiki.wireshark.org/WakeOnLAN </summary> </member> <member name="M:PacketDotNet.WakeOnLanPacket.#ctor(System.Net.NetworkInformation.PhysicalAddress)"> <summary> Create a Wake-On-LAN packet from the destination MAC address </summary> <param name="destinationMAC"> A <see cref="T:System.Net.NetworkInformation.PhysicalAddress" /></param> </member> <member name="M:PacketDotNet.WakeOnLanPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="P:PacketDotNet.WakeOnLanPacket.DestinationMAC"> <summary> The Physical Address (MAC) of the host being woken up from sleep </summary> </member> <member name="M:PacketDotNet.WakeOnLanPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the embedded Wake-On-LAN packet or null if there is none </summary> <returns> A Wake-On-LAN packet </returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.RandomPacket"> <summary> Generate a random WakeOnLanPacket </summary> <returns> A <see cref="T:PacketDotNet.WakeOnLanPacket" /></returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.IsValid"> <summary> Checks the validity of the Wake-On-LAN payload - by checking the synchronization sequence - by checking to see if there are 16 iterations of the Destination MAC address </summary> <returns> True if the Wake-On-LAN payload is valid </returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.IsValid(PacketDotNet.Utils.ByteArraySegment)"> <summary> See IsValid </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <returns> A <see cref="T:System.Boolean" /></returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.Equals(System.Object)"> <summary> Compare two instances </summary> <param name="obj"> A <see cref="T:System.Object" /></param> <returns> A <see cref="T:System.Boolean" /></returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.GetHashCode"> <summary> GetHashCode override </summary> <returns> A <see cref="T:System.Int32" /></returns> </member> <member name="M:PacketDotNet.WakeOnLanPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="T:PacketDotNet.StringOutputType"> <summary> The available types of strings that the ToString(StringOutputType) can handle. </summary> </member> <member name="F:PacketDotNet.StringOutputType.Normal"> <summary> Outputs the packet info on a single line </summary> </member> <member name="F:PacketDotNet.StringOutputType.Colored"> <summary> Outputs the packet info on a single line with coloring </summary> </member> <member name="F:PacketDotNet.StringOutputType.Verbose"> <summary> Outputs the detailed packet info </summary> </member> <member name="F:PacketDotNet.StringOutputType.VerboseColored"> <summary> Outputs the detailed packet info with coloring </summary> </member> <member name="T:PacketDotNet.Tcp.NoOperation"> <summary> No Operation Option Used in the TCP Options field to pad the length to the next 32 byte boundary </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc793/ </remarks> </member> <member name="M:PacketDotNet.Tcp.NoOperation.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a No Operation Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="F:PacketDotNet.Tcp.NoOperation.OptionLength"> <summary> The length (in bytes) of the NoOperation option </summary> </member> <member name="P:PacketDotNet.Tcp.NoOperation.Length"> <summary> The length of the NoOperation field Returns 1 as opposed to returning the length field because the NoOperation option is only 1 byte long and doesn't contain a length field </summary> </member> <member name="T:PacketDotNet.Tcp.EndOfOptions"> <summary> End-of-Options Option Marks the end of the Options list </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc793/ </remarks> </member> <member name="M:PacketDotNet.Tcp.EndOfOptions.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an End Of Options Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="F:PacketDotNet.Tcp.EndOfOptions.OptionLength"> <summary> The length (in bytes) of the EndOfOptions option </summary> </member> <member name="P:PacketDotNet.Tcp.EndOfOptions.Length"> <summary> The length of the EndOfOptions field Returns 1 as opposed to returning the length field because the EndOfOptions option is only 1 byte long and doesn't contain a length field </summary> </member> <member name="T:PacketDotNet.Tcp.MaximumSegmentSize"> <summary> Maximum Segment Size Option An extension to the DataOffset/HeaderLength field to allow sizes greater than 65,535 </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc793/ </remarks> </member> <member name="M:PacketDotNet.Tcp.MaximumSegmentSize.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a Maximum Segment Size Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.MaximumSegmentSize.Value"> <summary> The Maximum Segment Size </summary> </member> <member name="M:PacketDotNet.Tcp.MaximumSegmentSize.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.Option"> <summary> A TCP Option </summary> </member> <member name="M:PacketDotNet.Tcp.Option.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an Option from a byte[] </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="F:PacketDotNet.Tcp.Option.KindFieldLength"> <summary>The length (in bytes) of the Kind field</summary> </member> <member name="F:PacketDotNet.Tcp.Option.LengthFieldLength"> <summary>The length (in bytes) of the Length field</summary> </member> <member name="F:PacketDotNet.Tcp.Option.KindFieldOffset"> <summary>The offset (in bytes) of the Kind Field</summary> </member> <member name="F:PacketDotNet.Tcp.Option.LengthFieldOffset"> <summary>The offset (in bytes) of the Length field</summary> </member> <member name="P:PacketDotNet.Tcp.Option.Length"> <summary> The Length of the Option type </summary> </member> <member name="P:PacketDotNet.Tcp.Option.Kind"> <summary> The Kind of option </summary> </member> <member name="P:PacketDotNet.Tcp.Option.Bytes"> <summary> Returns a TLV that contains the Option </summary> </member> <member name="M:PacketDotNet.Tcp.Option.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.WindowScaleFactor"> <summary> Window Scale Factor Option Expands the definition of the TCP window to 32 bits </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc1323/ </remarks> </member> <member name="M:PacketDotNet.Tcp.WindowScaleFactor.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a Window Scale Factor Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.WindowScaleFactor.ScaleFactor"> <summary> The Window Scale Factor used as a multiplier to the window value The multiplier is equal to 1 left-shifted by the ScaleFactor So a scale factor of 7 would equal 1 &lt;&lt; 7 = 128 </summary> </member> <member name="M:PacketDotNet.Tcp.WindowScaleFactor.ToString"> <summary> Returns the Option info as a string The multiplier is equal to a value of 1 left-shifted by the scale factor </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.OptionTypes"> <summary> The different types fields that could be found in the Options field </summary> <remarks> References: http://en.wikipedia.org/wiki/Transmission_Control_Protocol#TCP_Timestamps http://www.networksorcery.com/enp/default1101.htm </remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.EndOfOptionList"> <summary>End Of List</summary> <remarks>See RFC 793</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.NoOperation"> <summary>No Operation</summary> <remarks>See RFC 793</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.MaximumSegmentSize"> <summary>Maximum Segment Size</summary> <remarks>See RFC 793</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.WindowScaleFactor"> <summary>Window Scale Factor</summary> <remarks>See RFC 1323</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.SACKPermitted"> <summary>SACK (Selective Ack) Permitted</summary> <remarks>See RFC 2018</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.SACK"> <summary>SACK (Selective Ack)</summary> <remarks>See RFC 2018 and RFC 2883</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.Echo"> <summary>Echo (obsolete)</summary> <remarks>See RFC 1072</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.EchoReply"> <summary>Echo Reply (obsolete)</summary> <remarks>See RFC 1072</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.Timestamp"> <summary>Timestamp</summary> <remarks>See RFC 1323</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.POConnectionPermitted"> <summary>Partial Order Connection Permitted (experimental)</summary> <remarks>See RFC 1693</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.POServiceProfile"> <summary>Partial Order Service Profile (experimental)</summary> <remarks>See RFC 1693</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.ConnectionCount"> <summary>Connection Count (experimental)</summary> <remarks>See RFC 1644</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.ConnectionCountNew"> <summary>Connection Count New (experimental)</summary> <remarks>See RFC 1644</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.ConnectionCountEcho"> <summary>Connection Count Echo (experimental)</summary> <remarks>See RFC 1644</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.AlternateChecksumRequest"> <summary>Alternate Checksum Request</summary> <remarks>See RFC 1146</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.AlternateChecksumData"> <summary>Alternate Checksum Data</summary> <remarks>See RFC 1146</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.MD5Signature"> <summary>MD5 Signature</summary> <remarks>See RFC 2385</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.QuickStartResponse"> <summary>Quick-Start Response (experimental)</summary> <remarks>See RFC 4782</remarks> </member> <member name="F:PacketDotNet.Tcp.OptionTypes.UserTimeout"> <summary>User Timeout</summary> <remarks>See RFC 5482</remarks> </member> <member name="T:PacketDotNet.Tcp.SACKPermitted"> <summary> SACK (Selective Ack) Permitted Option Notifies the receiver that SACK is allowed. Must only be sent in a SYN segment </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc2018/ </remarks> </member> <member name="M:PacketDotNet.Tcp.SACKPermitted.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a Sack Permitted Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="T:PacketDotNet.Tcp.SACK"> <summary> SACK (Selective Ack) Option Provides a means for a receiver to notify the sender about all the segments that have arrived successfully. Used to cut down on the number of unnecessary re-transmissions. </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc2018/ http://datatracker.ietf.org/doc/rfc2883/ </remarks> </member> <member name="M:PacketDotNet.Tcp.SACK.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a SACK (Selective Ack) Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.SACK.SACKBlocks"> <summary> Contains an array of SACK (Selective Ack) Blocks </summary> </member> <member name="M:PacketDotNet.Tcp.SACK.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.EchoReply"> <summary> Echo Reply Option Marked obsolete in the TCP spec Echo Reply Option has been replaced by the TSOPT (Timestamp Option) </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc1072/ </remarks> </member> <member name="M:PacketDotNet.Tcp.EchoReply.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an Echo Reply Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="T:PacketDotNet.Tcp.TimeStamp"> <summary> A Time Stamp Option Used for RTTM (Round Trip Time Measurement) and PAWS (Protect Against Wrapped Sequences) Opsoletes the Echo and EchoReply option fields </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc1323/ </remarks> </member> <member name="M:PacketDotNet.Tcp.TimeStamp.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a Timestamp Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.TimeStamp.Value"> <summary> The Timestamp value </summary> </member> <member name="P:PacketDotNet.Tcp.TimeStamp.EchoReply"> <summary> The Echo Reply </summary> </member> <member name="M:PacketDotNet.Tcp.TimeStamp.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.Echo"> <summary> An Echo Option throws an exception because Echo Options are obsolete as per their spec </summary> </member> <member name="M:PacketDotNet.Tcp.Echo.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an Echo Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="T:PacketDotNet.Tcp.AlternateChecksumRequest"> <summary> AlternateChecksumRequest Option </summary> </member> <member name="M:PacketDotNet.Tcp.AlternateChecksumRequest.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an Alternate Checksum Request Option Used to negotiate an alternative checksum algorithm in a connection </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> <remarks> References: http://datatracker.ietf.org/doc/rfc1146/ </remarks> </member> <member name="P:PacketDotNet.Tcp.AlternateChecksumRequest.Checksum"> <summary> The Checksum </summary> </member> <member name="M:PacketDotNet.Tcp.AlternateChecksumRequest.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.ChecksumAlgorighmType"> <summary> Specifies the different types of algorithms that the Alternative Checksum option are allowed to use </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc1146/ </remarks> </member> <member name="F:PacketDotNet.Tcp.ChecksumAlgorighmType.TCPChecksum"> <summary>Standard TCP Checksum Algorithm</summary> </member> <member name="F:PacketDotNet.Tcp.ChecksumAlgorighmType.EightBitFletchersAlgorithm"> <summary>8-bit Fletchers Algorighm</summary> </member> <member name="F:PacketDotNet.Tcp.ChecksumAlgorighmType.SixteenBitFletchersAlgorithm"> <summary>16-bit Fletchers Algorithm</summary> </member> <member name="F:PacketDotNet.Tcp.ChecksumAlgorighmType.RedundantChecksumAvoidance"> <summary>Redundant Checksum Avoidance</summary> </member> <member name="T:PacketDotNet.Tcp.AlternateChecksumData"> <summary> Alternative Checksum Date Used as an extension to Alternative Checksum Response when the checksum is longer than the standard 16bit TCP Checksum field </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc1146/ </remarks> </member> <member name="M:PacketDotNet.Tcp.AlternateChecksumData.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates an Alternate Checksum Data Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.AlternateChecksumData.Data"> <summary> The array of attached Checksum </summary> </member> <member name="M:PacketDotNet.Tcp.AlternateChecksumData.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.MD5Signature"> <summary> MD5 Signature Carries the MD5 Digest used by the BGP protocol to ensure security between two endpoints </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc2385/ </remarks> </member> <member name="M:PacketDotNet.Tcp.MD5Signature.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a MD5 Signature Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.MD5Signature.MD5Digest"> <summary> The MD5 Digest </summary> </member> <member name="M:PacketDotNet.Tcp.MD5Signature.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Tcp.UserTimeout"> <summary> User Timeout Option The TCP user timeout controls how long transmitted data may remain unacknowledged before a connection is forcefully closed </summary> <remarks> References: http://datatracker.ietf.org/doc/rfc5482/ </remarks> </member> <member name="M:PacketDotNet.Tcp.UserTimeout.#ctor(System.Byte[],System.Int32,System.Int32)"> <summary> Creates a User Timeout Option </summary> <param name="bytes"> A <see cref="T:System.Byte[]" /></param> <param name="offset"> A <see cref="T:System.Int32" /></param> <param name="length"> A <see cref="T:System.Int32" /></param> </member> <member name="P:PacketDotNet.Tcp.UserTimeout.Granularity"> <summary> The Granularity </summary> </member> <member name="P:PacketDotNet.Tcp.UserTimeout.Timeout"> <summary> The User Timeout </summary> </member> <member name="M:PacketDotNet.Tcp.UserTimeout.ToString"> <summary> Returns the Option info as a string </summary> <returns> A <see cref="T:System.String" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.InformationElementList"> <summary> A <see cref="!:System.Collections.Generic.List" /> of <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see>. </summary> <remarks> The order and set of Information Elements allowed in a particular 802.11 frame type is dictated by the 802.11 standards. </remarks> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.#ctor"> <summary> Initializes an empty <see cref="T:PacketDotNet.Ieee80211.InformationElementList" />. </summary> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.#ctor(PacketDotNet.Ieee80211.InformationElementList)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.InformationElementList" /> class. </summary> <param name="list"> The elements to be included in the list. </param> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.InformationElementList" /> class. </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /> containing one or more information elements. bas.Offset should point to the first byte of the first Information Element. </param> </member> <member name="P:PacketDotNet.Ieee80211.InformationElementList.Length"> <summary> Gets the total length in bytes of the list if its elements were serialised into a byte array </summary> <value> The length </value> </member> <member name="P:PacketDotNet.Ieee80211.InformationElementList.Bytes"> <summary> Gets a Byte[] containing the serialised <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see></summary> <value> The serialised <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see></value> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.FindById(PacketDotNet.Ieee80211.InformationElement.ElementId)"> <summary> Finds all <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformatonElements</see> in the lists with the provided id. </summary> <returns> The <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see> found, or an empty array if none are found </returns> <param name="id"> The Id to search for </param> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.FindFirstById(PacketDotNet.Ieee80211.InformationElement.ElementId)"> <summary> Finds the first <see cref="T:PacketDotNet.Ieee80211.InformationElement" /> in the list with the provided id. </summary> <returns> The first element with the provided Id or null if the list contains no relevant elements </returns> <param name="id"> The Id to search for </param> </member> <member name="M:PacketDotNet.Ieee80211.InformationElementList.CopyTo(PacketDotNet.Utils.ByteArraySegment,System.Int32)"> <summary> Serialises the <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see> in the list into the provided buffer. </summary> <param name="destination"> The <see cref="T:PacketDotNet.Utils.ByteArraySegment" /> to copy the elements into. </param> <param name="offset"> The offset into destination at which to start copy the <see cref="T:PacketDotNet.Ieee80211.InformationElement">InformationElements</see></param> <remarks>Ensure that the destination is large enough to contain serialised elements before calling this method</remarks> </member> <member name="T:PacketDotNet.Utils.Crc32"> <summary>Implements a 32-bits cyclic redundancy check (CRC) hash algorithm.</summary> <remarks>This class is not intended to be used for security purposes. For security applications use MD5, SHA1, SHA256, SHA384, or SHA512 in the System.Security.Cryptography namespace.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.#ctor"> <summary>Creates a CRC32 object using the <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.#ctor(System.UInt32)"> <summary>Creates a CRC32 object using the specified polynomial.</summary> <remarks>The polynomial should be supplied in its bit-reflected form. <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</remarks> </member> <member name="F:PacketDotNet.Utils.Crc32.DefaultPolynomial"> <summary>Gets the default polynomial (used in WinZip, Ethernet, etc.)</summary> <remarks>The default polynomial is a bit-reflected version of the standard polynomial 0x04C11DB7 used by WinZip, Ethernet, etc.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.Compute(System.String)"> <summary>Computes the CRC32 value for the given ASCII string using the <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.Compute(System.IO.Stream)"> <summary>Computes the CRC32 value for the given input stream using the <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.Compute(System.Byte[])"> <summary>Computes the CRC32 value for the input data using the <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.Compute(System.Byte[],System.Int32,System.Int32)"> <summary>Computes the hash value for the input data using the <see cref="F:PacketDotNet.Utils.Crc32.DefaultPolynomial" />.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.ComputeHash(System.String)"> <summary>Computes the hash value for the given ASCII string.</summary> <remarks>The computation preserves the internal state between the calls, so it can be used for computation of a stream data.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.ComputeHash(System.IO.Stream)"> <summary>Computes the hash value for the given input stream.</summary> <remarks>The computation preserves the internal state between the calls, so it can be used for computation of a stream data.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.ComputeHash(System.Byte[])"> <summary>Computes the hash value for the input data.</summary> <remarks>The computation preserves the internal state between the calls, so it can be used for computation of a stream data.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.ComputeHash(System.Byte[],System.Int32,System.Int32)"> <summary>Computes the hash value for the input data.</summary> <remarks>The computation preserves the internal state between the calls, so it can be used for computation of a stream data.</remarks> </member> <member name="M:PacketDotNet.Utils.Crc32.Initialize"> <summary>Initializes an implementation of HashAlgorithm.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.HashCore(System.Byte[],System.Int32,System.Int32)"> <summary>Routes data written to the object into the hash algorithm for computing the hash.</summary> </member> <member name="M:PacketDotNet.Utils.Crc32.HashFinal"> <summary>Finalizes the hash computation after the last data is processed by the cryptographic stream object.</summary> </member> <member name="T:PacketDotNet.Ieee80211.PpiFieldType"> <summary> from PPI v 1.0.10 </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiReserved0"> <summary> PpiReserved0 </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiReserved1"> <summary> PpiReserved1 </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiCommon"> <summary> PpiCommon </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiMacExtensions"> <summary> PpiMacExtensions </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiMacPhy"> <summary> PpiMacPhy </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiSpectrum"> <summary> PpiSpectrum </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiProcessInfo"> <summary> PpiProcessInfo </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiCaptureInfo"> <summary> PpiCaptureInfo </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiAggregation"> <summary> PpiAggregation </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.Ppi802_3"> <summary> Ppi802_3 </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiFieldType.PpiReservedAll"> <summary> PpiReservedAll </summary> </member> <member name="T:PacketDotNet.Ieee80211.Ppi802_3"> <summary> Contains information specific to 802.3 packets. </summary> </member> <member name="M:PacketDotNet.Ieee80211.Ppi802_3.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.Ppi802_3" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.Ppi802_3.#ctor(PacketDotNet.Ieee80211.Ppi802_3.StandardFlags,PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.Ppi802_3" /> class. </summary> <param name="Flags"> Standard Flags. </param> <param name="Errors"> Error Flags. </param> </member> <member name="M:PacketDotNet.Ieee80211.Ppi802_3.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.Ppi802_3" /> class. </summary> </member> <member name="T:PacketDotNet.Ieee80211.Ppi802_3.StandardFlags"> <summary> 802.3 specific extension flags. </summary> </member> <member name="F:PacketDotNet.Ieee80211.Ppi802_3.StandardFlags.FcsPresent"> <summary> FCS is present at the end of the packet </summary> </member> <member name="T:PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags"> <summary> Flags for errors detected at the time the packet was captured. </summary> </member> <member name="F:PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags.InvalidFcs"> <summary> The frames FCS is invalid. </summary> </member> <member name="F:PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags.SequenceError"> <summary> The frame has a sequence error. </summary> </member> <member name="F:PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags.SymbolError"> <summary> The frame has a symbol error. </summary> </member> <member name="F:PacketDotNet.Ieee80211.Ppi802_3.ErrorFlags.DataError"> <summary> The frame has a data error. </summary> </member> <member name="P:PacketDotNet.Ieee80211.Ppi802_3.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.Ppi802_3.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.Ppi802_3.Flags"> <summary> Gets or sets the standard 802.2 flags. </summary> <value> The standard flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.Ppi802_3.Errors"> <summary> Gets or sets the 802.3 error flags. </summary> <value> The error flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.Ppi802_3.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiAggregation"> <summary> The PPI Aggregation field is used to identify which physical interface a frame was collected on when multiple capture interfaces are in use. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiAggregation.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiAggregation" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiAggregation.#ctor(System.UInt32)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiAggregation" /> class. </summary> <param name="InterfaceId"> The interface id. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiAggregation.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiAggregation" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiAggregation.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiAggregation.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiAggregation.InterfaceId"> <summary> Zero-based index of the physical interface the packet was captured from. </summary> <value> The interface id. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiAggregation.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiCaptureInfo"> <summary> The PPI Capture Info field has been assigned a PPI field type but currently has no defined field body. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiCaptureInfo.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiCaptureInfo" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiCaptureInfo.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiCaptureInfo" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCaptureInfo.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCaptureInfo.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCaptureInfo.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiCommon"> <summary> The PPI Common field contains fields common to all 802.11 specifications. This field is loosely based on the Radio Tap header format. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiCommon.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiCommon" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiCommon.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiCommon" /> class. AntennaSignalPower and AntennaSignalNoise are both set to their minimum value of -128. </summary> </member> <member name="T:PacketDotNet.Ieee80211.PpiCommon.CommonFlags"> <summary> Common 802.11 flags. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiCommon.CommonFlags.FcsIncludedInFrame"> <summary> Defines whether or not an FCS is included at the end of the encapsulated 802.11 frame. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiCommon.CommonFlags.TimerSynchFunctionInUse"> <summary> If set the TSF-timer is in milliseconds, if not set the TSF-timer is in microseconds </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiCommon.CommonFlags.FailedFcsCheck"> <summary> Indicates that the FCS on the encapsulated 802.11 frame is invalid </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiCommon.CommonFlags.PhysicalError"> <summary> Indicates that there was some type of physical error when receiving the packet. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.ChannelFlags"> <summary> Radiotap-formatted channel flags. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.ChannelFrequency"> <summary> Radiotap-formatted channel frequency, in MHz. 0 indicates an invalid value. </summary> <value> The channel frequency. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.Flags"> <summary> The common flags. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.Rate"> <summary> Data rate in multiples of 500 Kbps. 0 indicates an invalid value. </summary> <value> The data rate. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.TSFTimer"> <summary> Gets or sets the TSF timer. </summary> <value> The TSF Timer value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.FhssHopset"> <summary> Gets or sets the Frequency-hopping spread spectrum (FHSS) hopset </summary> <value> The FHSS hopset. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.FhssPattern"> <summary> Gets or sets the Frequency-hopping spread spectrum (FHSS) pattern. </summary> <value> The FHSS pattern. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.AntennaSignalPower"> <summary> Gets or sets the RF signal power at antenna. </summary> <value> The antenna signal power. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.AntennaSignalNoise"> <summary> Gets or sets the RF signal noise at antenna </summary> <value> The antenna signal noise. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiCommon.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiField"> <summary> Abstract class for all PPI fields </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiField.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiField.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiField.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="M:PacketDotNet.Ieee80211.PpiField.Parse(System.Int32,System.IO.BinaryReader,System.UInt16)"> <summary> Parse a PPI indicated by type, from a given BinaryReader </summary> <param name="fieldType"> A <see cref="T:System.Int32" /></param> <param name="br"> A <see cref="T:System.IO.BinaryReader" /></param> <param name="fieldLength"> The maximum number of bytes that the field to be parsed can encompass. </param> <returns> A <see cref="T:PacketDotNet.Ieee80211.PpiField" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.PpiMacExtensionFlags"> <summary> 802.11n MAC Extension flags. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.GreenField"> <summary> Indicates the use of Greenfield (or HT) mode. In greenfield mode support for 802.11 a/b/g devices is sacrificed for increased efficiency. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.HtIndicator"> <summary> Indicates the High Throughput (HT) mode. If not set channel width is 20MHz, if set it is 40MHz. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.RxSgi"> <summary> Indicates the use of a Short Guard Interval (SGI). </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.DuplicateRx"> <summary> Indicates the use of HT Duplicate mode. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.Aggregate"> <summary> Indicates the use of MPDU aggregation. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.MoreAggregates"> <summary> Indicates the presence of more aggregate frames. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiMacExtensionFlags.AggregateDelimiterCrc"> <summary> Indicates there was a CRC error in the A-MPDU delimiter after this frame. </summary> </member> <member name="T:PacketDotNet.Ieee80211.PpiMacExtensions"> <summary> The 802.11n MAC Extension field contains radio information specific to 802.11n. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiMacExtensions.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiMacExtensions" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiMacExtensions.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiMacExtensions" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.Flags"> <summary> Gets or sets the 802.11n MAC extension flags. </summary> <value> The flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.AMpduId"> <summary> Gets or sets the A-MPDU identifier. </summary> <value> the A-MPDU id. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.DelimiterCount"> <summary> Gets or sets the number of zero-length pad delimiters </summary> <value> The delimiter count. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacExtensions.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiMacPhy"> <summary> The 802.11n MAC + PHY Extension field contains radio information specific to 802.11n. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiMacPhy.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiMacPhy" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiMacPhy.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiMacPhy" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.Flags"> <summary> Gets or sets the 802.11n MAC extension flags. </summary> <value> The flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.AMpduId"> <summary> Gets or sets the A-MPDU identifier. </summary> <value> the A-MPDU id. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DelimiterCount"> <summary> Gets or sets the number of zero-length pad delimiters </summary> <value> The delimiter count. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ModulationCodingScheme"> <summary> Gets or sets the modulation coding scheme. </summary> <value> The modulation coding scheme. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.SpatialStreamCount"> <summary> Gets or sets the number of spatial streams. </summary> <value> The spatial stream count. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiCombined"> <summary> Gets or sets the combined Received Signal Strength Indication (RSSI) value from all the active antennas and channels. </summary> <value> The combined RSSI. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna0Control"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 0, control channel. </summary> <value> The antenna 0 RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna1Control"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 1, control channel. </summary> <value> The antenna 1 control channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna2Control"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 2, control channel. </summary> <value> The antenna 2 control channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna3Control"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 3, control channel. </summary> <value> The antenna 3 control channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna0Ext"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 0, extension channel </summary> <value> The antenna 0 extension channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna1Ext"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 1, extension channel </summary> <value> The antenna 1 extension channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna2Ext"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 2, extension channel </summary> <value> The antenna 2 extension channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.RssiAntenna3Ext"> <summary> Gets or sets the Received Signal Strength Indication (RSSI) value for the antenna 3, extension channel </summary> <value> The antenna 3 extension channel RSSI value. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ExtensionChannelFrequency"> <summary> Gets or sets the extension channel frequency. </summary> <value> The extension channel frequency. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ExtensionChannelFlags"> <summary> Gets or sets the extension channel flags. </summary> <value> The extension channel flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna0SignalPower"> <summary> Gets or sets the RF signal power at antenna 0. </summary> <value> The signal power. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna0SignalNoise"> <summary> Gets or sets the RF signal noise at antenna 0. </summary> <value> The signal noise. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna1SignalPower"> <summary> Gets or sets the RF signal power at antenna 1. </summary> <value> The signal power. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna1SignalNoise"> <summary> Gets or sets the RF signal noise at antenna 1. </summary> <value> The signal noise. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna2SignalPower"> <summary> Gets or sets the RF signal power at antenna 2. </summary> <value> The signal power. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna2SignalNoise"> <summary> Gets or sets the RF signal noise at antenna 2. </summary> <value> The signal noise. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna3SignalPower"> <summary> Gets or sets the RF signal power at antenna 3. </summary> <value> The signal power. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.DBmAntenna3SignalNoise"> <summary> Gets or sets the RF signal noise at antenna 3. </summary> <value> The signal noise. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ErrorVectorMagnitude0"> <summary> Gets or sets the error vector magnitude for Chain 0. </summary> <value> The error vector magnitude. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ErrorVectorMagnitude1"> <summary> Gets or sets the error vector magnitude for Chain 1. </summary> <value> The error vector magnitude. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ErrorVectorMagnitude2"> <summary> Gets or sets the error vector magnitude for Chain 2. </summary> <value> The error vector magnitude. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.ErrorVectorMagnitude3"> <summary> Gets or sets the error vector magnitude for Chain 3. </summary> <value> The error vector magnitude. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiMacPhy.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiProcessInfo"> <summary> PPI process info field. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiProcessInfo.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiProcessInfo" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiProcessInfo.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiProcessInfo" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.ProcessId"> <summary> Gets or sets the process identifier. </summary> <value> The process identifier. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.ThreadId"> <summary> Gets or sets the thread identifier. </summary> <value> The thread identifier. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.ProcessPath"> <summary> Gets or sets the process path. </summary> <value> The process path. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.UserId"> <summary> Gets or sets the user identifier. </summary> <value> The user identifier. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.UserName"> <summary> Gets or sets the user name. </summary> <value> The user name. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.GroupId"> <summary> Gets or sets the group identifier. </summary> <value> The group identifier. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.GroupName"> <summary> Gets or sets the group name. </summary> <value> The group name. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiProcessInfo.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiUnknown"> <summary> The PpiUnknown field class can be used to represent any field types not currently supported by PacketDotNet. Any unsupported field types encountered during parsing will be stored as PpiUnknown fields. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiUnknown.#ctor(System.Int32,System.IO.BinaryReader,System.Int32)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiUnknown" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="typeNumber"> The PPI field type number </param> <param name="br"> The stream the field will be read from </param> <param name="length"> The number of bytes the unknown field contains. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiUnknown.#ctor(System.Int32)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiUnknown" /> class. </summary> <param name="typeNumber"> The PPI field type number. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiUnknown.#ctor(System.Int32,System.Byte[])"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiUnknown" /> class. </summary> <param name="typeNumber"> The PPI field type number. </param> <param name="UnknownBytes"> The field data. </param> </member> <member name="P:PacketDotNet.Ieee80211.PpiUnknown.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiUnknown.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiUnknown.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiUnknown.UnknownBytes"> <summary> Gets or sets the field data. </summary> <value> The fields values bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiSpectrum"> <summary> The PPI Spectrum field is intended to be compatible with the sweep records returned by the Wi-Spy spectrum analyzer. </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiSpectrum.#ctor(System.IO.BinaryReader)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiSpectrum" /> class from the provided stream. </summary> <remarks> The position of the BinaryReader's underlying stream will be advanced to the end of the PPI field. </remarks> <param name="br"> The stream the field will be read from </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiSpectrum.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiSpectrum" /> class. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.FieldType"> <summary>Type of the field</summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.Length"> <summary> Gets the length of the field data. </summary> <value> The length. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.StartingFrequency"> <summary> Gets or sets the starting frequency in kHz. </summary> <value> The starting frequency. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.Resolution"> <summary> Gets or sets the resolution of each sample in Hz. </summary> <value> The resolution in Hz. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.AmplitudeOffset"> <summary> Gets or sets the amplitude offset (in 0.001 dBm) </summary> <value> The amplitude offset. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.AmplitudeResolution"> <summary> Gets or sets the amplitude resolution (in .001 dBm) </summary> <value> The amplitude resolution. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.MaximumRssi"> <summary> Gets or sets the maximum raw RSSI value reported by the device. </summary> <value> The maximum rssi. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.SamplesData"> <summary> Gets or sets the data samples. </summary> <value> The data samples. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiSpectrum.Bytes"> <summary> Gets the field bytes. This doesn't include the PPI field header. </summary> <value> The bytes. </value> </member> <member name="T:PacketDotNet.Ieee80211.PpiHeaderFields"> <summary> As defined by Airpcap.h NOTE: PresentPosition may not be the only position present as this the field can be extended if the high bit is set </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.FirstFieldPosition"> <summary>Position of the first iField Header</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.DataLinkTypeLength"> <summary>Length of the Data Link Type</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.DataLinkTypePosition"> <summary>The data link type position.</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.FlagsLength"> <summary>Length of the Flags field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.FlagsPosition"> <summary>Position of the Flags field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.LengthLength"> <summary>Length of the length field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.LengthPosition"> <summary>Position of the length field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.VersionLength"> <summary>Length of the version field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.VersionPosition"> <summary>Position of the version field</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.PpiPacketHeaderLength"> <summary>The total length of the ppi packet header</summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiHeaderFields.FieldHeaderLength"> <summary>The length of the PPI field header</summary> </member> <member name="T:PacketDotNet.Ieee80211.PpiPacket"> <summary> .Net analog of a PpiHeader.h from airpcap </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiPacket" /> class. </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.#ctor"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.PpiPacket" /> class. </summary> </member> <member name="T:PacketDotNet.Ieee80211.PpiPacket.HeaderFlags"> <summary> PPI packet header flags. </summary> </member> <member name="F:PacketDotNet.Ieee80211.PpiPacket.HeaderFlags.Alignment32Bit"> <summary> Indicates whether or not the PPI fields are aligned to a 32 bit boundary. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.Item(System.Int32)"> <summary> Gets the <see cref="T:PacketDotNet.Ieee80211.PpiPacket" /> at the specified index. </summary> <param name="index"> Index. </param> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.Length"> <summary> Length of the whole header in bytes </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.Version"> <summary> Version 0. Only increases for drastic changes, introduction of compatible new fields does not count. </summary> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.Flags"> <summary> Gets or sets the PPI header flags. </summary> <value> The PPI header flags. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.LinkType"> <summary> Gets or sets the type of the link type specified in the PPI packet. This should be the link type of the encapsulated packet. </summary> <value> The link type. </value> </member> <member name="P:PacketDotNet.Ieee80211.PpiPacket.Count"> <summary> Returns the number of PPI fields in the PPI packet. </summary> <value> The number of fields. </value> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.Add(PacketDotNet.Ieee80211.PpiField)"> <summary> Add the specified field to the packet. </summary> <param name="field"> the field. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.Remove(PacketDotNet.Ieee80211.PpiField)"> <summary> Removes the specified field from the packet. </summary> <param name="field"> the field. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.RemoveAll(PacketDotNet.Ieee80211.PpiFieldType)"> <summary> Removes all fields of the specified type. </summary> <param name="type"> the field type to be removed. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.Contains(PacketDotNet.Ieee80211.PpiField)"> <summary> Checks whether the specified field is in the packet. </summary> <param name="field"> <c>true</c> if the field is in the packet, <c>false</c> if not. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.Contains(PacketDotNet.Ieee80211.PpiFieldType)"> <summary> Checks whether there is field of the specified type in the packet. </summary> <param name="type"> <c>true</c> if there is a field of the specified type in the packet, <c>false</c> if not. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.FindFirstByType(PacketDotNet.Ieee80211.PpiFieldType)"> <summary> Finds the first field in the packet of the specified type. </summary> <returns> The first field in the packet of the specified type, or <c>null</c> if there is no field of the specified type. </returns> <param name="type"> The type of packet to find. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.FindByType(PacketDotNet.Ieee80211.PpiFieldType)"> <summary> Finds the fields in the packet of the specified type. </summary> <returns> The fields of the specified type, or an empty array of there are no fields of that type. </returns> <param name="type"> The type of packet to find. </param> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.GetEncapsulated(PacketDotNet.Packet)"> <summary> Returns the Ieee80211MacFrame inside of the Packet p or null if there is no encapsulated packet </summary> <param name="p"> A <see cref="T:PacketDotNet.Packet" /></param> <returns> A <see cref="T:PacketDotNet.Ieee80211.MacFrame" /></returns> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.ToString(PacketDotNet.StringOutputType)"> <summary cref="Packet.ToString(StringOutputType)" /> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.GetEnumerator"> <summary> Gets the enumerator of PPI fields. </summary> <returns> The field enumerator. </returns> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.UpdateCalculatedValues"> <summary> Called to ensure that field values are updated before the packet bytes are retrieved </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.ReadPpiFields"> <summary> Array of PPI fields </summary> </member> <member name="M:PacketDotNet.Ieee80211.PpiPacket.ParseEncapsulatedBytes(PacketDotNet.Utils.ByteArraySegment,PacketDotNet.Ieee80211.PpiCommon)"> <summary> Used by the Ieee80211PpiPacket constructor. </summary> <param name="header"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> <param name="commonField"> The <see cref="T:PacketDotNet.Ieee80211.PpiCommon" /> object in the PPI packet or null if not available </param> <returns> A <see cref="T:PacketDotNet.PacketOrByteArraySegment" /></returns> </member> <member name="T:PacketDotNet.Ieee80211.AckFrame"> <summary> Format of an ACK frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.AckFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.AckFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.AckFrame" /> class. </summary> <param name="ReceiverAddress"> Receiver address. </param> </member> <member name="P:PacketDotNet.Ieee80211.AckFrame.ReceiverAddress"> <summary> Receiver address </summary> </member> <member name="P:PacketDotNet.Ieee80211.AckFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.AckFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="M:PacketDotNet.Ieee80211.AckFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> <member name="T:PacketDotNet.Ieee80211.CtsFrame"> <summary> Format of a CTS frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.CtsFrame.#ctor(PacketDotNet.Utils.ByteArraySegment)"> <summary> Constructor </summary> <param name="bas"> A <see cref="T:PacketDotNet.Utils.ByteArraySegment" /></param> </member> <member name="M:PacketDotNet.Ieee80211.CtsFrame.#ctor(System.Net.NetworkInformation.PhysicalAddress)"> <summary> Initializes a new instance of the <see cref="T:PacketDotNet.Ieee80211.CtsFrame" /> class. </summary> <param name="ReceiverAddress"> Receiver address. </param> </member> <member name="P:PacketDotNet.Ieee80211.CtsFrame.ReceiverAddress"> <summary> Receiver address </summary> </member> <member name="P:PacketDotNet.Ieee80211.CtsFrame.FrameSize"> <summary> Length of the frame </summary> </member> <member name="M:PacketDotNet.Ieee80211.CtsFrame.UpdateCalculatedValues"> <summary> Writes the current packet properties to the backing ByteArraySegment. </summary> </member> <member name="M:PacketDotNet.Ieee80211.CtsFrame.GetAddressString"> <summary> Returns a string with a description of the addresses used in the packet. This is used as a compoent of the string returned by ToString(). </summary> <returns> The address string. </returns> </member> </members> </doc>